Indian Army - Haryana

39611924 bids are invited for flex board acrylic plate , backlit board , star flex , retro vinyl , star flex with pasting , star flex with frame , aluminium frame with fitting , glass board , window blinds , flex board total quantity : 41...

Haryana Urban Development Authority - Haryana

39391499 providing fixing of entry doors of comity room, tt room, suite room, office room, library, store room etc using aluminum frame and all other works contingent thereto at community center sector 15, panchkula...

Military Engineer Services - Haryana

38568631 tender for comprehensive maint to tech area ( northern side ) at af stn sirsa. 1 demolition cement concrete ( un reinforced ) of any description in ground floors, pavings, etc. not exc. 150mm thickness ( above or below ground level ) and removing debris, etc. to outside md / af land, complete all as specified and as directed. 2 m&l for cement concrete 1:4:8 type d2 ( 40mm graded stone aggregate ) 100mm thick in sub bases, complete all as specified and as directed. 3 m&l for cement concrete 1:2:4 tybe b1 ( 20mm graded stone aggregate ) 100mm thick as in flooring complete all as specified and as directed. 4 m&l for cementconcrete type b 1, 1:2:4 ( 20mm graded stone aggregate ) 40mm thick as in paths / hardstanding finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed. 5 m&l for cement concrete 1:3:6 type c2 ( 40mm graded stone aggregate ) , 75mm thick in plinth protectionfinishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed. 6 m&l for machine pressed precast conctete interlocking paver block any shape and size confirming to is 15658 2006 of 60 mm thickness, m 35 grade, with grey cement & no pigment, incl taking out existing old paver blocks and removingfrom sitecomplete all as specified and directed. 7 m&l for sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed. 8 taking down cement plaster including raking out joints, hacking for key, scrubbing down with water and removing debris, etc. to outside md / af land, complete all as specified and as directed. 9 m&l for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound ( as per manufacturers instructions ) onbrick / stone walls or concrete surfaces finished even and fair ( upto any height ) for external surfacescomplete all as specified and directed.note : water proofing compound shall be measured and paid seperately as supply only. 10 supply only liquid water proofing compound, conforming to is and / or as approved, complete all as specified. 11 m&l for rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and as directed. 12 m&l for preparing new plastered surfaces of walls and applying two coats of weatherproof exterior emulsion paint ( in camouflage pattern ) over and including priming coat with suitable exterior primer, applied as per manufacturers recommendations complete all as specified and as directed. 13 m&l for preparing new rough cast plastered surfaces of walls and applying two coats of weatherproof exterior emulsion paint ( in camouflage pattern ) over and including priming coat with suitable exterior primer, applied as per manufacturers recommendations complete all as specified and as directed. 14 demolition of brick work built in cement mortar and in any position including all quoins, arches and pillars, etc. incl removal of debsris from site complete all as specified and as directed. 15 m&l for brick work with fly ashbricks ( old size bricks ) , straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:6, complete all as specified and as directed. 16 m&l brick work using serviceable bricks obtained from item no. 16 here in before including removing old mortar, straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:6, complete all as specified and as directed. 17 dismantling of asbestos cement ( corrugated, semicorrugated, plain, etc. ) sheets in roof / wall coverings and removal from sitecomplete all as specified and as directed. 18 dismantling of fibreglass / polycarbonate roofing sheet ( corrugated, semicorrugated, plain, etc. ) sheets in roof / wall coverings and removal from sitecomplete all as specified and as directed. 19 s&f 0.50 mm thick tct ( total coated thickness ) pre coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib / multi rib profile galvalume sheetinghaving 1000 1020 mm width and 28 30 mm high crest @ maximum 250 255 mm pitch ( centre ) with sheets manufactured out of 0.50 mm this tct ( total coated thickness ) high tensile galvalume sheets having tensile strength 550 mpa with 18 20 micron top coat over 5 micron primer and 8 10 micron alkyld backer zinc aluminium alloy az 150, sheets having a dip metallic zinc ( 43.5%0 aluminium ( 55% ) & silicon ( 1.5% ) with total mass coating of 150 gms / sqm on both sides, having wide pans with minimum 3 smallstiffening ribs for effective water shedding and special male / female ends with full return legs on laps for purlin support and fixed as per existing profile of roof completeall as specified and directed. 20 s&f pre painted, galvalume aluminium zinc coating gi based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 mpa, as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 21 dismantling structural steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed. 22 m&l for steel work in tubular trusses including special shaped washer etc complete using erw or induction butt welded tubes conforming to is 1161 1979 grade st 240 complete all as specified and directed. ( note: quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts ( including rivets or bolts and nuts ) , providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete ) 23 m&l for preparing new or previously untreated steel and iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint ( first quality ) over a red oxide zinc chrome primer, complete all as specified and as directed. 24 dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed. 25 m&l for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165 complete all as specified and directed. 26 dismantling ofwallandceilingboards ( fibre, pulp, insulation, etc. ) or insulationboards / slabs / blankets, any thickness, including cover fillets incl removal from site complete all as specified and as as directed. 27 s&f 6mm thick hpsc cement fibre plain building boards, fixed to wall, including finishing with 2 mm thick wall puttycomplete all as specified and as directed. 28 s&f false ceiling with powder coated exposed g.i. grid suspension system consisting of main runner 3600 mm long, cross tee 1200mm / 600mm long and wall angle, wall angle fixed on pvc dash fasteners on the perimeter of the wall by steel screws with distance 300 mm c / c, main runners placed @ 1200mm, cross tee 1200mm inserted in the pre cut slots of main runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm and additional cross tees of 600 mm placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600mm x 600mm, grid of module size 600mm x 600mm shall be supported by 6 mm dia g.i. wire from purlins / soffit complete all as specified and directed. note: ceiling board will measured and paid seperately under appropriate item. 29 s&f 12mm thick mineral fibre core ceiling board / tiles for insula tion and accoustic purposes, 60x60 cm in size, fixed on gi snap grid frame work with steel screws, complete all as specified and as directed. 30 m&l for solid pvc wall lining consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame, including various pvc angle / section all as per manufacture instruction and specificationas including taking down carefully the existing electric point wiring and making it concealed by cutting grooves on brick walls as required at site for wall panelling complete all as specified and as directed. 31 m&l for 5mm thick pvc sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make pvc frame as per specification and drawing. 32 dismantling floor, paver tiles, hearth or wall tiling, etc. including cement mortar bedding ( but not backing ) and removing debris, etc. to outside md / af land, complete all as specified and as directed. 33 m&l for non skid glazed ceramic coloured / printed floor tiles 400x400x6.0 to 7.0mm thick in flooring, set and jointed in neat cement slurry and pointed in white / coloured cement, laid over and including 15mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 34 m&l for coloured glazed ceramic tiles in vertical surface 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick rendering as screed or backing coat of wall tilein cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 35 m&l coloured glazed ceramic tiles 300x200x6.0 to 7.0mm thick in vertical surface i.e. dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 36 m&l for vitirified coloured tiles 9 to 10mm thick ( square / rectangular ) , double charged, light shade, polished, area of each tile not exc. 0.36 square metre in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, laid over and including 15mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be include in the quoted unit rate. 37 m&l for vtirified coloured tiles 9 to 10mm thick ( square / rectangular ) double charged, light shade, polished, area of each tile not exc. 0.36 square metre in vertical surface i.e. dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be include in the quoted unit rate. 38 m&l dismantling stone slabs and / or tiles of any description or thickness in floors, aprons, etc. laid, bedded and pointed in cement mortar, removal of debris outside af land, cleaning of area to remove dust, loose particles, washing with water and providingmachine cut kota stone slab 20 25mm thick in flooring, laid over 20mm thick screed base in cement mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.note : cost of cement screed bed shall deem to be include in the quoted unit rate. 39 m&l dismantling stone slabs and / or tiles of any description or thickness in floors, aprons, etc. laid, bedded and pointed in cement mortar, removal of debris outside af land, cleaning of area to remove dust, loose particles, washing with water and providinggranite ( of any type ) tiles, 18 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 40 m&l for rcc 1:2:4 ( type b1 ) using 20mm graded aggregate as counter / platform supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 41 m&l for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia complete all as specified and directed. 42 s&f in repair rotational moulded polyethene water storage tank, 500 litre capacity, cylindrical, vertical with closed top, 3 layered, conforming to is, hoisted and fixed in position complete all as specified and as directed. 43 s&f in repair rotational moulded polyethene water storage tank, 1000 litre capacity, cylindrical, vertical with closed top, 3 layered, conforming to is, hoisted and fixed in position complete all as specified and as directed. 44 s&f in repairball brass valves, high pressure, with polythene float and flynut complete for 20mm dia bore pipe , screwed for iron pipe or brass ferrule and fixed complete all as specified and as dieceted. 45 s&f in repair looking mirror 5.0mm thick of size 600x600mm, fixed with chromium plated brass spacers 25mm to 30mm in size ( one each corner ) including rounding the edges of the mirror and fixed in repairs, complete all as specified and as directed. 46 s&f in repair brass chromium plated tubular towel rail 20mm dia, 60 cm long with brackets complete all as specified and as directed. 47 s&f in repair stainless steel grating round 100mm dia with waste hole jointing with solvent cement complete all as specified and as directed. 48 s&f in repair chromium plated health faucet with 1mtr stainless steel tube indcluding necessary fitting and fixtures complete all as specified and as directed by engr in charge. 49 s&f in repair vitreous china, white, half stall urinal flat back with grating and union for discharge pipe ( excl flush pipe and flushing cistern and waste pipe ) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed. 50 s&f brass chromium plated urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed. 51 s&f in repair 75mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 52 s&f in repair 110mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 53 s&f in repair pvc ( swr ) bends any 75mm bore complete all as specified and as directed 54 s&f in repair pvc ( swr ) bends any 110mm bore complete all as specified and as directed 55 s&f in repair 75mm bore pvc ( swr ) floor trap, plain with grating including jointing with solvent cement 56 taking up or down steel tubing 15mm bore ( dia ) and connections, segregating the serviceable pipes and connections, stacking properly at site ( s ) and keep in safe custody for re use, complete all as specified and as directed. 57 taking up or down steel tubing 20mm bore ( dia ) and connections, segregating the serviceable pipes and connections, stacking properly at site ( s ) and keep in safe custody for re use, complete all as specified and as directed. 58 supply & laying steel water tubing 15mm bore ( dia ) , galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed. 59 refixing old steel tubing 15mm bore ( dia ) and connections ( serviceable pipes and connections obtained from item here in before ) in new or old position ( walls, ceiling, floors, etc. ) including cleaning both inner and outer surfaces of pipes by using wire brush including provision of new gi connections ( as required ordered at sites ) , complete all as specified and as directed. 60 supply & laying steel water tubing 20mm bore ( dia ) , galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed. 61 refixing old steel tubing 20mm bore ( dia ) and connections ( serviceable pipes and connections obtained from item no. 15 here in before ) in new or old position ( walls, ceiling, floors, etc. ) including cleaning both inner and outer surfaces of pipes by using wire brush including provision of new gi connections ( as required ordered at sites ) , complete all as specified and as directed. 62 s&f vitreous china white squatting pan of size 580x440mm, orissa pattern with integral foot rests, ‘p’ or ‘s’ trap, providing joints between flush pipe and socket of wc pan, cones, india rubber ( nozzles of wc pan ) incluiding provision of lime concrete bedding and making good to floor / distrubed surfaces and fixed in repairs, complete all as specified and as directed. 63 s&f in repair pvc flushing cistern 10 litre capacity white, low level, valve less, syphonic action type with inlet, ball valve, float and handle, pvc waste pipe 32mm bore ( dia ) of suitable length, a pair of cast iron bracket / erecting stand duly painted including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 and fixed in repairs, complete all as specified and as directed. 64 s&f in repair vitreous china wash basin, white, flat back, size 550x400mmexcluding taps, waste, chain and plug and porcelain stopper butincluding brackets cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe 65 s&f in repair bib tap 15mm bore ( dia ) , cast copper alloy, chromium plated, fancy type, longbody with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. 66 s&f in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, facny type screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 67 s&f in repair stop cock 15mm bore ( dia ) , cast copper alloy, chromium plated, fancy type with long shank and cup ( concealed type ) , screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and as directed. 68 s&f in repair angle valve 15mm bore ( dia ) , cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for iron pipe and fixed in repairs, complete all as specified and as directed. 69 s&f in repair pvc waste pipe 32mm dia ( bore ) having 600mm long and fixed complete to walls, ceilings or in floors, etc.and fixed in repairs, complete all as specified and as directed. 70 s&f in repair pvc connection pipe 15mm size and 60 cm in length with adopter nuts of pvc and fixed in repairs, complete all as specified and as directed. 71 taking down wooden chowkat or frame with shutter ( without taking off shutter from the frame ) , exc. 1.5 square metre but not exc. 4.0 square metre each, complete all as specified and as directed. 72 taking down and refixing of shutters of any descriptionin same opening n exc 1sq. m each complete all as specified and as directed. 73 taking down shutters of any descriptionn exc 1 sqm each complete all as specified and as directed. 74 supply and fixed steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for fixing wire mesh including one shop coat of priming, complete all as specified and directed. ( note : sheet glass for glazing shall be measured and paid seperately ) 75 taking down chowkat or frame ( any type ) with shutter ( without taking off shutter from the frame ) , n.exc. 1.5 square metre each, complete all as specified and as directed. 76 s&f steel rolling shutters thickness of lath 1mm, gear operated type with bevel gear box and crank handlewith out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specifeid and as directed. 77 m&l for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete fe 290, ( gde e 165 ) complete all as specified and directed. 78 s&f 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. 79 s&f pressed steel frame of size 125x60mm using 1.25mm thick mild steel sheets for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including making good to disturbed suurfaces complete all as specified and as directed. 80 s&f pressed steel frame of size 105x60mm using 1.25mm thick mild steel sheets for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including making good to disturbed suurfaces complete all as specified and as directed. 81 s&f flush door shutter 35mm thick, solid core construction with block board core and plywood face panels commercial type on both side with decorative face veneer with lipping / frame to match and fitted to steel frame, complete all as specified and as directed. 82 m&l second class hardwood plain framed panelled shutter factory made 35mm thick ( any number of panels ) with panels of 12mm thick veneered particle board, medium density or 12mm thick plywood board, bwr with commercial veneering on both faces and fitted to steel frame, complete all as specified and as directed. 83 m&l for 35mm thick second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. ( without sash bars ) , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me mbers of shutters as specified in ssr part i, section 8, clause 8.24 ( a ) ; supplied and fitted to chowkats complete all as specified and as directed. 84 s & f pvc solid door frame of size 50 x 47 mm made out of 5 mmthick prelaminated single side pvc sheet reinforced with ms square tube complete all as specified and as directed. 85 s & f 30 mm thick factory made both side prelaminated solid panel pvc door shutter consisting of frame made out of ms tube of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails, treated with a coat of metal primer, ms frame covered with heat moulded prelaminated pvcc channel for stiles and both side prelaminated pvc sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminatedpvc sheet to be fitted in the ms frame welded / sealed to the stiles and rails with suitable pvc sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed. 86 s&f butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type b 21 complete all as specified and directed. 87 s&f aluminium handle 150mm long ( weight not less than 120 gram ) , extruded section, fabricated type, anodised, complete all as specified and as directed. 88 s&f anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long ( 1 no each shutter. ) . hinges type b 21 100mm long ( 2 no each shutter. ) suitable handle ( 1 no each shutter. ) complete all as directed by engineer in charge. 89 s&f anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and as directed.note : ( a ) the rates include for provision of pvc protected sheeting and its removal after fixing the frame work. ( b ) hinges, shutters and lugs shall be measured and paid for separately. 90 s&f sheet glass 4.0mm thick, ordinary quality and glazing, in square exc. 0.50 sqm in each pane of aluminium windows, complete all as specified and as directed. 91 s&f stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. 92 s&f in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as diected. 93 s&f aluminium anodised security / window grill of ( as approved ) 4mm thick made out of anodised aluminium section including necessary side channel and other accessories required for fixing etc, complete all as specified and as directed. 94 hacking out old broken glass ( any thickness, size, quality or description ) from wooden or metal frames, glazed with putty or fixed with beads, complete all as specified and as directed. 95 s&f sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane of steel windows, complete all as specified and as directed. 96 s&f in repair aluminium handle 150mm long ( weight not less than 120 gram ) , extruded section, fabricated type, anodised, complete all as specified and as directed. 97 s&f aluminium barrel tower bolt 200mm long ( weight not less than 210 gram ) , extruded section, complete all as specified and as directed. 98 s&f aluminium barrel tower bolt 100mm long ( weight not less than 210 gram ) , extruded section, complete all as specified and as directed. 99 s&f 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specifed and as directed. 100 m&l preparing new or previously untreatedwood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint ( first quality ) , over a coat of wood primer complete, including cleaning the surface, all as specified and as directed. 101 m&l new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint ( first quality ) , over a coat of zinc chrome red oxide primer complete, including cleaning the surface, all as specified and as directed. 102 repairing of aluminium door, windows, ventilators shutter fixed / side hung / sliding type including replacement of necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws, etc. and repairing of locking arrangement if any, complete all as specified and as directed.note : cost of materials requiredfor smooth functioning of shutter shall deem to be included in the quoted unit rate. 103 s&f in repair door closer aluminium ( die cast ) body, hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 kilogram , complete all as specified and as directed. 104 s&f in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and as directed. 105 s&f in repair for mild steel, chromium plated curtain rod 25mm dia ( as approved ) , complete all as specified and as directed. 106 s&f in repair for mild steel, chromium plated side dome and to be fitted / tightened for curtain rod 25mm dia with screws, complete all as specified and as directed. 107 s&f in repair for mild steel, chromium plated bracket ( shaped ) , for holdingfor mild steel, chromium plated curtain rod 25mm dia , complete all as specified and as directed....

Indian Army - Haryana

38480198 bids are invited for civil works closure of one existing door with bricks and plastering works for conference room , closure of 4 nos of windows with bricks and cement , change of frame for 2 nos of existing window with aluminium frame and glass door , wooden flooring heavy duty action tesa brand for conference room , fittment of tuffen glass with essential accessories for conference room , roller blind zebra type for windows at conference room , filming work on tuffen glass at conference room with formation insignia cutout , aluminium partition l type for conference room total quantity : 615...

Public Health Engineering Department - Haryana

38407428 tender for certain 8x3 / washing and drycline of certain notice board / notice board with aluminium frame supply of ice box 25 ltr. / for foundation of stone proposed water works lala labour / hiring of labour for loading and unloading of stand and notice board and other work...

Northern Railway - Haryana

38128487 auction sale of scrap & condemned return air filter with aluminium frame of different types of sorts & sizes with or w / o standard stainless steel attachments as it is, note: aluminium may be found approx. 75 80% in lot qty....

Women And Child Development Department - Haryana

38018714 bids are invited for stationery creche kit ( q3 ) 1 calculator 12 digits display with plastic keys powered by solar and battery 140 mm width length 123mm and 30.1mm height 1 pcs. 2. tape dispenser – 1no. 3. tape roll – 3 nos. 4. pencil ( pack of 20 nos. ) 12 nos. 5. eraser non toxic white color dust free pack of 20 erasers 12 nos. 6. display board ( softboard core alloy aluminum frame premium flocked fabric cloth surface frame thickness 1mm board size 606mm x 457mm shape rectangular built in wall hangers 2 ) – 2nos. 7. pencil sharpner ( pack of 20 nos. ) – 12 nos. 8. sketch pen set of 12 vibrant bright and intense color with ventilated caps 6 nos. 9. wax crayons ( pack of 12 nos. ) – 15 nos. 10. scale ( material transparent virgin plastic dimension 300mmx 29mm ) – 6 nos. 11. white adhesive 1 nos. 12. gluestick high quality adhesive quick bonding material plastic net weight 8gram – 6 nos. 13 permanent marker marks on surfaces like cd / dvd / ohp film extra smooth dark marking ink color black material plastic dimension length 14x6.5x2cm ( pack of 4 nos. ) 2 nos. 14. color flag 5 bright color flag 2x sticking powers dimensions 15x76mm ( sticky notes ) 4 pkt. 15 stapler – 1 nos. 16. paint colour – 8 boxes 17. sticker – 12 pkts. 18. kite paper – 72 pcs ( 6 dozens ) 19. glaze paper 36 nos. 20. a4 rim – 1 no. 21. master register 1 nos. 22. stock register 2 nos. 23. attendance register – 3 nos. 24. white chalk 04 boxes. 25. coloured chalk – 03 boxes...

Indian Army - Haryana

37715457 bids are invited for one side pvc coated awning with aluminium frame one side pvc coated awning with aluminium frame 110 sq feet , one side pvc coated awning with aluminium frame 70 sq feet total quantity : 2...

Indian Army - Haryana

37710554 bids are invited for aluminium frame one side pvc coated awning with powder coated aluminium frame 110 sq feet , one side pvc coated awning with powder coated aluminium frame 70 sq feet one side pvc coated awning with powder coated total quantity : 2...

Northern Railway - Haryana

36881760 auction sale of scrap & condemned return air filter with aluminium frame of different types of sorts & sizes with or w / o stainless steel attachments as it is, us & ur. ( qty on approx. basis ) note: aluminium may be found approx. 75 80%, stainless steel ( wire mesh ) approx. 15 20% and rest is filter material. loc; lying at bin no.c 105 a, in scrap yard judw...

Haryana Board Corporation - Haryana

36262367 sls 2023 organisation of three days state livestock show 1 ) main summit area 2 ) aluminium frame structure of size 40x100 meters for 3 days including wall to wall carpeting, front facade, side banners, air conditioning, side / central barricading, fulfilling all security norms like demarcated emergency exits, fire extinguishers etc...

Northern Railway - Haryana

36058784 auction sale of scrap & condemned return air filter with aluminium frame of different types of sorts & sizes with or w / o stainless steel attachments as it is, loc: lying at beside bin no c 37 in scrap yard judw. note: aluminium may be found approx. 75 80%, ...

Department of Higher Education - Haryana

35944060 bids are invited for purchase of furniture no. item specitications steel almira, 2 doors, 4 adjustable shelf, theckness 0.8mm 19 almirah ( b ) w900xd400xh1125 almirah ( s ) steel almira, 2 doors, 4 adjustable shelf, theckness 0.8mm 20 w940xd60oxh2110 book case / book rack / steel library rack ( double face ) , thickness 0.8 mm 3 book shelves computer chair 80 low back chair, pp aem, gas lift, nylon base, pu moulded set push back &back, pp seat & back cover, fabric tapestry w1500xd750xh750 computer table big size |computer desk, particale board edge banded top computer desk, particale board edge banded structure, castor w800xds0oxh750 for mobility 25 computer table 6 2 48w x 36h display boards / notice made of aluminum frame pin board and best fabric 7 board executive chair / officers medium back chair, pp chrome cushion arm, gas lift, pp chair 15 pure leather knee lilt chrome base leatherite tapestry medium back chair, aluminium cushion arm, torsion bar, gas |leathrite tapestry executive revolving chair / revolving chair lift, chrome base 9 w2000xd2100xh750 1 executive table finish 10 walnut small table with drawer executive table, particle board top, fixed metal pedestal, metal | w1200x d600 x h750 11 4x2 steel chairs with 12 handles 13 lecture stand office chair ( wooden ) executive table, particle board & mdf top frame, powder coated visitor chair, pp arm, chrome plated pipe stand, seat & back leatherite tapestry wooden chrome plated 20 |48h x 24wx 20d 67 14 15 25 revolving chair without |low back chair, pp aem, gas lift, nylon base, pu moulded set push back arm ( computer chairs ) &back, pp seat & back cover, fabric tapestry 16 steel chairs 17 18 steel rack ( big ) student desk ( 3 seater ) three seater desk, plpb edge banded top, seat & back, visitor chair, pp arm, chrome plated pipe stand, seat & back chrome plated leatherite tapestry steel library rack ( double face ) , thickness 0.8 mm 20 w940 x d600 x h2110 three seater 30 powder coated pipe frame, top side 1500 x 400 x 18mm 19 thick overall size 1050 x 960 x 750 30 study chair with writing |student / traning room chair, plpb writing pad, powder coated powder coated pad pipe frame, book trey under seat, seat back fabric tapestry 20 3 seater sofa with powder coated arms & legs, perforated powder coated seat & back, size in mm 1750 ( l ) x 710 ( d ) x 755 ( h ) 3 seater without cushion |waiting steel bench 3 seater 21 wooden side rack with wooden pedestal, 2 drawer, 1 filing 22 door cushion chairs 23...

National Dairy Research Institute - Haryana

35046821 tender for providing one parking shed, one open sitting she with puf sbeet roofing and ss furniture trailing aluminum frame! wire mesh in balconies, rait water harvesting system. paver block fnooring, and other flooring fplastering /rcc repair works etc. o] various hostels at icar ndri, karnal...

Health Department - Haryana

34402941 e tender for purchase of printing material ( printing painting / printed flex / wall material ) for haryana government health institutions situated at district charkhi dadri for one year from the date of approval e tender for purchase of printing material ( printing painting / printed flex / wall material ) for haryana government health institutions situated at district charkhi dadri for one year from the date of approval , opd card white / green / yellow 130 gsm card , double side single printing, 8.5 x 11.5 , opd card white / green / yellow 170 gsm card sheet, double side single printing, 8.5 x 11.5 , opd slip 70 gsm maplitho a grade paper, both side printing, 8.5 x 5.75 , all reporting forms 70 gsm maplitho a grade paper, both side printing with binding 1x100 leaf pad size: 8.5 x 11.5, ( one pad = 100 ) , all reporting forms 70 gsm maplitho a grade paper, single side printing with binding, 1x100 leaf pad size: 8.5 x 11.5 ( one pad = 100 ) , all reporting forms 70 gsm maplitho a grade paper, both side printing with binding, 1x100 leaf pad size: 11 x 17 ( one pad = 100 ) , all reporting forms 70 gsm maplitho a grade paper, single side printing with binding, 1x100 leaf pad size: 11 x 17 ( one pad = 100 ) , vinyl with multicolor printing & lamination per sq. feet. , performa gum pads ( different type ) with 18 oz card board and title cover 11.9 kg sheet 8.5x11.5 ( 100 leaves ) 70 gsm ( one pad = 100 ) , performa gum pads ( different type ) with 18 oz card board and title cover 11.9 kg sheet 18x22 / 8 white / colour 100 sheet single side printing / single colour / pad type binding maplitho a grade paper, printing 80gsm with s. no ( one pad = 100 ) , performa gum pads ( different type ) with 18 oz card board and title cover 11.9 kg sheet size 13.5x8.2 white / colour 100 sheet single side printing / single colour / pad type binding maplitho a grade paper, printing 80gsm with s. no ( one pad = 100 ) , performa gum pads ( different type ) with 18 oz card board and title cover 11.9 kg sheet size 18x22 / 4 white / colour 100 sheet single side printing / single colour / pad type binding maplitho a grade paper, printing 70 gsm with s. no ( one pad = 100 ) , performa gum pads ( different type ) with 18 oz card board and title cover 11.9 kg sheet size 18x22 / 6 white / colour 100 sheet single side printing / single colour / pad type binding maplitho a grade paper, printing 70 gsm with s. no ( one pad = 100 ) , performa gum pads ( different type ) with 18 oz card board and title cover 11.9 kg sheet size 18x22 / 2 white / colour 100 sheet single side printing / single colour / pad type binding maplitho a grade paper, printing 70 gsm with s. no ( one pad = 100 ) , multicolor l3 boolkletl 3 delivery booklet, maternity services booklet for l 3 facility, no. of pages 28 + 4 pages cover ( 32 pg. ) cover multicolor, both side printed on 120 gsm paper & inner pages, multicolor printed on 70 gsm ‘a’ grade maplitho paper, two leaf die perforation in the booklet, binding center pin. ( as per sample ) ( 1 booklet = pages 28 + 4 pages cover ( 32 pg. ) , multicolor l2 boolklet l 2 delivery booklet, maternity services booklet for l 2 facility, no. of pages 16 + 4 pages cover ( 20 pg. ) cover multicolor, both sides printed on 130 gsm art paper & inner pages, multicolor printed on 70 gsm ‘a’ grade maplitho paper, two leaf die perforations in the booklet, binding center pin. ( as per sample ) ( 1 booklet = 32 pages ) , multicolor l1 booklet l 1 delivery booklet, maternity services booklet for l 1 facility, no. of pages 12 + 4 pages cover ( 16 pg. ) cover multicolor, both side printed on 120 gsm paper & inner pages, multicolor printed on 70 gsm ‘a’ grade maplitho paper, two leaf due perforation in the booklet. ( size 8.5x 11 approx ) , binding center pin. ( as per sample ) ( 1 booklet = no. of pages 12 + 4 pages cover ( 16 pg. ) , indoor patient department ( ipd ) general admission booklet, printing multicolour on cover 4 pages both side, size: 8.5x11 inch, printing single colour on inner pages, paper cover 250, gsm card & inner paper 70 gsm a grade maplitho, total no. of pages ( 4 pages cover+20 pages inner ) , fabrication: one die perforation & centre pin binding, rates are inclusive of designing, printing, & delivery ( as per sample ) ( 1 booklet = no. of pages 20 + 4 pages cover ( 24 pg. ) , surgery patient department surgery admission booklet, printing multicolour on cover 4 pages both side, size: 8.5x11 inch, printing single colour on inner pages, paper cover 250, gsm card & inner paper 70 gsm a grade maplitho, total no. of pages ( 4 pages cover+36 pages inner ) , fabrication: one die perforation & centre pin binding, rates are inclusive of designing, printing, & delivery, civil hospital, charkhi dadri ( as per sample ) ( 1 booklet = no. of pages 36 + 4 pages cover ( 40 pg. ) , short stay patient admission booklet, printing multicolour on cover 4 pages both side, size: 8.5x11 inch , printing single colour on inner pages, paper cover 250, printing single colour on inner pages, paper cover 250, gsm card & inner paper 70 gsm a grade maplitho, total no. of pages ( 4 pages cover+14 pages inner ) , fabrication: one die perforation & centre pin binding, rates are inclusive of designing, printing, & delivery ( as per sample ) ( 1 booklet = no. of pages 14 + 4 pages cover ( 18 pg. ) , all registers 80 gsm super sunshine paper, both side printing with hard binding with gatta, 9 x 13.5 ( 100 leaves ) ( 1 register = 100 leaves ) , all register 80 gsmsuper sunshine super paper, both side printing with hard binding with gatta, 9 x 13.5 ( 200 leaves ) ( 1 register = 200 leaves ) , all register 80 gsmsuper sunshine super paper, both side printing, 9 x 13.5 ( 300 leaves ) ( 1 register = 300 leaves ) , all register 80 gsm super sunshine paper, both side printing with hard binding with gatta, 9 x 13.5 ( 500 leaves ) ( 1 register = 500 leaves ) , all register 80 gsmsuper sunshine paper, both side printing with hard binding with gatta, 9 x 13.5 per leaf ( 1 register = 1000 leaves ) , all register 80 gsmsuper sunshine paper, both side printing with hard binding with gatta, 10 x 15 ( 100 leaves ) ( 1 register = 100 leaves ) , all register 80 gsmsuper sunshine paper, both side printing with hard binding with gatta, 10 x 15 ( 200 leaves ) ( 1 register = 200 leaves ) , all register 80 gsmsuper sunshine paper, both side printing with hard binding with gatta, 10 x 15 ( 300 leaves ) ( 1 register = 300 leaves ) , all register 80 gsmsuper sunshine paper, both side printing with hard binding with gatta, 10 x 15 ( 500 leaves ) ( 1 register = 500 leaves ) , all register 80 gsmsuper sunshine paper, both side printing, with hard binding with gatta11 x 18 ( 100 leaves ) ( 1 register = 100 leaves ) , all register 80 gsm super sunshine paper, both side printing, with hard binding with gatta 11 x 18 ( 200 leaves ) ( 1 register = 200 leaves ) , all register 80 gsmsuper sunshine paper, both side printing, with hard binding with gatta 11 x 18 ( 300 leaves ) ( 1 register = 300 leaves ) , all register 80 gsmsuper sunshine paper, both side printing, with hard binding with gatta 11 x 18 ( 500 leaves ) ( 1 register = 500 leaves ) , all posters: multicolour printing, final cut 19 inches ( w ) x 29 inches ( h ) bleed size: 19.6 inches ( w ) x 29.6 inches ( h ) paper 90 gsm bilt artpaper with 1 inches gumming strip top, bottom and center rate per poster , wall painting for health activities in rural and urban area, base and writing with plastic paint at chcs, phcs, sub centers, village ( per sq. ft. ) minimum area per wall 80 sq.feet. , barcode stickers / label roll for opd card 50mm x 75mm ( 1000 stickers per roll ) , barcode stickers / label roll for opd card 25mm x 50mm ( 1000 stickers per roll ) , cloth banner for polio ( street ) size 2.3 mtr x1 mtr. printing multicolor & stitching nefa both side ( as per sample ) , booth banner for polio ( cloth ) size 48x26 inch ( as per sample ) printing multicolor & stitching with lupi on each corner for hanging. , multicolor cloth banner size 4ft. x 3 ft. cloth as per sample printing multicolor, washable & stitching with lupi on each corner for hanging. , multicolor cloth banner size 5 ft. x 3.5 ft. cloth as per sample printing multicolor, washable & stitching with lupi on each corner for hanging. , multicolor cloth banner size 4 ft. x 2 ft. cloth as per sample printing multicolor, washable & stitching with lupi on each corner for hanging. , satin cloth banner printing multi color & washable quality ( fast color ) cloth satin stitching top & bottom with lupi on ( four corners ) for hanging size 3 ft.x3.5ft. ( as per sample ) , satin cloth banner printing multi color & washable quality ( fast color ) cloth satin stitching left & right with lupi on ( four corners ) for hanging size 5 ft.x3.5ft. ( as per sample ) , simple flex banner with corner hole 200gsm ( per sq. ft. ) , heavy flex banner with corner hole 300 gsm ( per sq. ft. ) , glow sign board 1x1pipe, star backlit flex, inside lighting philips with 1 year warranty, backside iron sheet ( per sq. ft. ) , signages digital printing with lamination & backside 5mm sun board sheet ( per sq. inch. ) , signages digital printing with lamination & backside 3 mm sunboard sheet ( per sq. inch. ) , sun board 3 mm , with pasting of vinyl on the top multicolor printing ( per square feet ) , sun board 5 mm , with pasting of vinyl on the top multicolor printing ( per square feet ) , canopy tent 6x6x7ft. with star flex , cold rolled steel confirming to is 513 having yield strength of 240 mpa ( minimum ) , base metal thickness should not be less than 0.55 mm , polio leaflet for vaccinators with both side multicolor, printing on 100 gsm gloss art paper, size : 8.5’’x12’’ ( as per sample ) , multicolor i card print on 300 gsm art card, with safety pin & die hole punch, size ( 90mm x 70mm approx. ) ( as per sample ) , vial opener ( screw driver small ) as per sample , color chalk box ( 1x40 stick per box ) , white chalk box ( 1x40 stick per box ) , standee size 6x3 with heavy flex 300 gsm , standee size 6x2.5 with heavy flex 300 gsm , ball pen for polio program ( indelible ink marker ) , mcp booklet cardsize: 4 width x 11.25 height, pages: 40 pages ( 20 leaves ) including cover and back page, which includes two growth charts 8x11.25, paper : 150 gsm a grade paper, printing : both side multi colors printing, binding : center stitch with two staple pins at equal distance, jacket of polyster sheet of 100 micron on both side ( front & back ) of the booklet of size 4x11.25 to be center stitched with the booklet with two staple pins, packing 20 mcp cards to be packed in one, packet / bundle and 10 packets / bundles in 1 carton, rates are inclusive of delivery charges at civil surgeon office, charkhi dadri ( hr ) ( 1 booklet = 40 pages ) , wall calendars size 23x36130 gsm art paper multicolorprinting ( 10 gauge iron patti in 22 inches length ( blue colour ) will be used in rimming on both side ends ) , wall calendars size 18x23130 gsm art paper multicolorprinting ( 10 gauge iron patti in 22 inches length ( blue colour ) will be used in rimming on both side ends ) , wall calendars size 20x30130 gsm art paper multicolorprinting ( 10 gauge iron patti in 22 inches length ( blue colour ) will be used in rimming on both side ends ) , wax ribbon ( 1 ribbon size = 100mm x 100 mtr. ) , hoarding of heavy flex with iron frame of pipe ( 1 inch sq. pipe with multicolor printing flex 300 gsm for health department installed at site assigned at the time of order with the limit of district authorities, including labour, installation material & installation with cartage charges of tempoo. all inclusive ( with installation ) at chc, phc etc. , hoarding of normal flex with iron frame of pipe ( 1 inch sq. pipe with multicolor printing flex 200 gsm for health department installed at site assigned at the time of order with the limit of district authorities, including labour, installation material & installation with cartage charges of tempoo. all inclusive ( with installation ) at chc, phc etc. , multicolor poster 20x30 inch on 75 gsm art paper with top & bottom 1 gumming strip , paper rim a4 size 70 gsm per packet having 500 sheet ( cost of one rim ) , paper rim a4 size 75 gsm per packet having 500 sheet ( cost of one rim ) , paper rim legal size 70 gsm per packet having 500 sheet ( cost of one rim ) , paper rim legal size 75 gsm per packet having 500 sheet ( cost of one rim ) , cbac register 9.5x14400 pages / 200 leaf inner pages 64 gsm maplitho paper both side printing swing andhard binding with side clothes & cover 28 oz gatta with front & back printed paper pasted on gatta ( 1 register = 400 pages ) , family folder register 9.5x 14 1 leaf+ 2 leaf ( 70 set ) =420 pages / 210 leaf + 1leaf for instructions gathering and mixing cover 28 oz gatta inner pages 64 gsm maplitho paper both side printing. & front / back gatta with printed paper pasting. ( 1 register = 420 pages ) , npcdcs pbs register 9.5x1448 pages / 24 leaf 64 gsm swing and hard binding with side clothes 28 oz gatta inner pages 80 gsm maplitho a grade & cover 28 oz gatta with front & back printing paper pasting. ( 1 register = 48 pages ) , hoarding of normal flex with iron frame of pipe ( 1 inch sq. pipe with multicolor printing flex 200 gsm for health department rate are inclusive of delivery charges at civil surgeon office. ( without installation ) , hoarding of normal flex with iron frame of pipe ( 1 inch sq. pipe with multicolor printing flex 300 gsm for health department rate are inclusive of delivery charges at civil surgeon office ( without installation ) , multicolor poster 18x23 inch on 75 gsm art paper with top & bottom 1 gumming strip , notice board: board material soft board core, frame material durable aluminum, shape rectangular size: 2x3 feet , notice board: board material soft board core, frame material durable aluminum, shape rectangular size: 4x3 feet , notice board: board material soft board core, frame material durable aluminum, shape rectangular size: 6x4 feet , white board with aluminum frame size 6x4 feet non megnetic non folded , white board with aluminum frame size 3x4 feet non megnetic non folded , white board with aluminum frame size 3x2 feet non megnetic non folded , due list cum tally sheet register for immunizationprinting multicolor on cover front & back with thermal lamination both side on cover & cover paper 170 gsm art card, inner paper 64 gsm white, 50 gsm approx yellow & pink copy, single color printing no of pages 300 inner cover + one leaf for instruction no. of total set 50x3 with manual numbering binding gathering designing. die perforation on yellow & pink copy with bindingetc as per sample ( size 17x10.5 ) side cloth red / blue ( 1 register = 300 inner page + cover ) , medical booklet cum screening booklet specification size a / 5 ( half of a / 4 ) paper = 170 gsm matt card paper = 2 leave / 4 pages printing both side multicolor all pages ( screening card ) binding center fold. ( 1 booklet = 4 pages ) , pamphlet / leaflet single side print on 50 gsm color paper size 8.5x10.5 with designing & single color printing , pamphlet / leaflet both side print on 50 gsm color paper size 8.5x10.5 with designing & single color printing , pamphlet / leaflet both side print on 50 gsm color paper size 5.5x8.5 with designing & single color printing , pamphlet / leaflet single side print on 50 gsm color paper size 5.5x8.5 with designing &single color printing , pamphlet / leaflet single side print on 70 gsm art paper size 5.5x8.5 with designing & multicolor color printing , pamphlet / leaflet both side print on 70 gsm art paper size 5.5x8.5 with designing & multicolor color printing , pamphlet / leaflet single side print on 70 gsm art paper size 8.5x10.5 with designing & multicolor color printing , pamphlet / leaflet both side print on 70 gsm art paper size 8.5x10.5 with designing & multicolor color printing , pamphlet / leaflet single side print on 100 gsm art paper size 8.5x10.5 with designing & multicolor color printing , pamphlet / leaflet both side print on 100 gsm art paper size 8.5x10.5 with designing & multicolor color printing , treatment card printing both side single color on 300 gsmcardsize 8.5x11.5 , treatment card printing single side single color on 300 gsmcardsize 8.5x11.5 , tb i card for patientprinting both side single color on 300 gsmcardsize 5.5x8.5 , bed head ticket file 70 gsm sunshine super paper, both side printing, 11 x 17 , x ray envelop 10.50x13.0580 gsm on khaki paper with printing , x ray envelop 8.5x11 80 gsm on khaki paper with printing , x ray envelop 12.5x15.580 gsm on khaki paper with printing , x ray envelop 10.5x12.580 gsm on khaki paper with printing , x ray envelop 14x17.580 gsm on khaki paper with printing , challan book of 100 pages on 75 gms super paper a 6 size single side single colour printingwith double numbering, stamping, perforation and binding. , mmiy medicine dispensing envelope with both side printing on 80 gsm khaki paper size 6x8.5 , mmiy medicine dispensing envelope with both side printing on 80 gsm khaki paper size 4.256 , receipts for accounts deptt. counter foil, 100 pages, duly sr. & book no., binded book , voucher booklet 100 triplicate, duly sr. no. with binding , sncu discharge card folder size a4 ( 8.5x 11 ) paper 100gsm, 4 colour printing, a grade mill, both side printing , temperature record booklet for ice lined, refrigerator ( ilr ) cover printing : multicolor, inner pages printing : multicolor, cover paper : 300 gsm art card inner paper : 120 gsm a grade bilt sun shine, no. ofpages 12 leaf x 3 set=36 leaf, size : 12x8.5, binding: swing & perfect ( as per sample ) ( 1 booklet = 36leaf ) , temperature record booklet for deep freezer ( df ) , cover printing : multicolor, inner pages printing : multicolor, cover paper : 300 gsm art card, inner paper : 120 gsm a grade bilt sun shine, no. ofpages 12 leaf x 3 set=36 leaf size : 12x8.5, binding: swing & perfect ( as per sample ) ( 1 booklet = 36 leaf ) ...

Northern Railway - Haryana

34053772 auction sale of scrap & condemned return air filter with aluminium frame of different types of sorts & sizes with or w / o stainless steel attachments as it is, us & ur. ( qty on approx. basis ) note: aluminium may be found approx. 75 80%, stainless steel ( wire mesh ) approx. 15 20% and rest is filter material. loc; material lying at beside bin no.c 37 scrap yard judw remarks: loading by railway....

Northern Railway - Haryana

31596901 auction sale of scrap & condemned return air filter with aluminium frame of different types of sorts & sizes with or w / o stainless steel attachments as it is, loc: lying at beside bin no c 37 in scrap yard judw. note: aluminium may be found approx. 75 80%, ...

Department Of Health - Haryana

31474672 short term e tender for iec material print, media items and others items. short term e tender for iec material print, media items and others items. , laying and jointing pvc pipe. heading , driver log book , 100 page one side print with cloth stripe binding, page numbering, size 8x13 inch, 85 gsm , cr log book , 200 page with numbering, both side print with cloth strip binding, size 13x16.5 inch, 85 gsm , patient care form book , serial no. in duplicate copy, one page white and one yellow, single side print, size 10.5x8.5, 85 gsm , mdr register , 100 pages each, 85 gsm , 1st informer form, 50 pages each, 85 gsm , mdr line listing form, 100 pages each, 85 gsm , fbmdr verbal autopsy questionnarie, mdr case summery, 30 pages each, 85 gsm , labour room register, 50 pages, legal size with binding, both side printing, 85 gsm , l 2 case sheet , 10 pages per book let, a4 size, both side multicolor printing, 85 gsm paper , multi color poster, size 12x18 inch, multi color digital printing, paper 110 120 gsm , banner, star flex with good quality printing, size 4x5 ft , banner, star flex with good quality printing, size 5x3 ft , banner , star flex with good quality printing, size 3x2 ft , pamphlet, a4 size multi color printing, glosy paper , patient health card, size a5, 170gsm matt card, 8 leaves, both side multicolour printing with center stitch ( 2 staples ) , patient follow up card, size a5, 170gsm matt card, 2 leaves, both side multicolour printing , hording , star flex with good quality printing, size 10x08 ft, with iron frame with installations , banner , star flex with good quality printing, size 6x4 ft , multi color poster, size 20x30 inch, multi color digital printing, paper 110 120 gsm , assesment form , 10 pages per booklet, a4 size, single side, balack & white printing, 85 gsm paper , formats, a4 size, single side, black & white printing, 75 gsm paper , cloth banner, size 4x3 ft, multi colour cloth banner , rksk register, 50 page one side printing with center stitch ( 2 staples ) , page numbering, size a4 , sunboard sheet, size 3x2 ft, 5mm thikness, multicolour digital printing , sunboard sheet, size 6x4 ft, 5mm thikness, multicolour digital printing , sunboard sheet, size 4x3 ft, 5mm thikness, multicolour digital printing , mcp multicolor booklet mother & child protection immunization booklet, pages = 40 pages ( 20 leaves ) including cover & back page, which includes tow growth charts8” x 11.25” paper: 150 gsm art paper both sidemulti colors printing binding : center stitch with two staple pins are equaldistance jacket of acrylic sheet of 100 micron on both side ( front & back ) of the booklet of size 4” x 11.25” to be center stitched with the booklet with two staple pins. packing: 100 mcp cards to be packed in one packet. , bio waste colour polybag size 12”x14”, 200 / 50 micron made by virgin polymer, ist quality with printing bio hazard logo & hospital use only and haryana govt supply not for sale. printing on bag both side as per bmw rule 2016. , zip lock polythene bag 6 x 8, 50 micron / 200 guage thickness. , zip lock polythene bag 8 x 10, 50 micron / 200 guage tickness. , foldable standing flex with aluminium frame, star flex, 4x3 ft , pear educator kit: bhranti & kranti booklet size 8 1 / 4 x 5 1 / 4 inch, total pages 08 with cover ( 4 leaves ) , paper quality 130 gsm art paper including cover, multicolour printing, binding centre pin / centre stiched. bhranti & kranti card sets ( type 1 ) size 4 1 / 4 x 5 1 / 4 inch, paper quality 250 gsm art card imported, multicolour, single side printing, one set having 16 cards. bhranti & kranti card sets ( type 2 ) size 4 1 / 4 x 5 1 / 4 inch, paper quality 250 gsm art card imported, multicolour both side printing, one set having 16 cards. pe activity book size 8 1 / 2 x 11 1 / 4 inch, total page 84+4 pages ( 42+2 leaves ) , paper quality: inner 130 gsm art paper, cover 250 gsm art card with lamination, multicolour printing, binding perfect. pe reference book faq, size 8 1 / 2 x 11 1 / 4 inch, total pages 52+4 pages ( 26+2 leaves ) , paper quality: inner 130 gsm art paper, cover 250 gsm art card with lamination, multicolour printing, binding perfect. pe cloth bag ( as per goi sample ) , size 16x5 inch, logo to be printed on both sides, handelstrips two handle strips of 24 inch ( one inch stiched with the bag at the opening circumference of bag ) ...

Government Medical College - Haryana

31373072 fabrication of aluminium frame cubical partition in mdru molecular lab 4th floor of teaching block in kcgmc karnal fabrication of aluminium frame cubical partition in mdru molecular lab 4th floor of teaching block in kcgmc karnal...

Indo Tibetan Border Police - Haryana

31041231 bids are invited for sports shoes branded central sports shooting aipdm and central commando team , sports shoes branded central yoga team , sports shoes central equestrian team , marathon shoes branded central athletc team , volleyball shoes asiucs gel rocekt 7 aipg volleyball cluster , dms shoes abrasion, resistant anti skidand rib top central aipdm shootng team , spikes shoes central athletc team , throwing shoes branded (synthetic leather) central athletc team , hammer globs , hand grip , grip powder , weight training belt , skin tiet sports shirt , swim racing jammer (arena/tyr /speedo) , swim racing goggle (arena/tyr /speedo) , swim racing cap (arena/tyr /speedo) , swim kit bag (back pack) (wesley milestone/wild craft) , swim resistance training belt 4mtr (tyr/yagviz/spike) ,swimming pool pace clock , volleyball playing kitcomplete sleeveless with chest number and itbplogo 2pair with different colour dida 100%polyester dryfast cloth , net wire vibco steelrubber coated meterial , volleyball trolley niviacollapsible ball trolley carries up to 20 inflatedballs , volleyball spartan super volley , volleyballtraining blocking board aluminum frame with grips tohold the blocks , vertical target ring 3 mtr height10to 20m height adjustable weighted foundation for stability30 inch ring diameter idle3 for training purpose ,horizontal target training ring with encloser netsturdy net collects the ball for easy retrieval heightadjustable weighted foundation for stability 30 inch ringdiameter idle3 for training purposeboq title sports items for central sports team total quantity : 481...

Indian Army - Haryana

31035326 bids are invited for digital thermometer , pulse oxy meter , change over 63 amp 4 pole 3 phase , pedestal fan , defence land board ,aluminum frame for office , digital wall clockboq title office purpose items total quantity : 111...

Haryana Urban Development Authority - Haryana

30944362 providing fixing pf of toughened glass with aluminum frame in h no. 610 and 611 sec 6 panchkula including mtc and defect liability period of one year free of cost pf of toughened glass with aluminum frame in h no. 610 and 611 sec 6 panchkula including mtc and defect liability period of one year free of cost...

Indian Army - Haryana

30917796 bids are invited for office steel almirah large six ft 24 gauge , office computer table large, wood/ply/mdf , ornate plastic chair , centre table (size 3x2ft x 2ft) , notice board with aluminum frame(size 4ftx3ft) , curtains 7ftx 4ft cotton plain , table clothgreen wool (size 5.5 x 3.5 ft) , pulse meterboq title covid related items total quantity : 16...

Indian Council Of Agricultural Research - Haryana

30741157 providing one parking shed, one open shitting shed with puf sheet roofing and ss furniture/railing, aluminium frame/wire mesh in balconics, rain water harvesting system, paver block flooring and other flooring /plastering/rcc rapair works etc of various hostel....

Karnal Cooperative Sugar Mills Limited - Haryana

30397600 greenhouse. greenhouse. , construction of green house and net house as per standard norms prescribed by national horticulture board ( the specifications for one block of 300 m2 ( 300 m2 x 2 blocks = 600 m2 ) are given below: , main structure: channel type structure made of 2m thick, gi ( square pipe ) section, including cutting, bended in required shape, , complete as per requirements, design need to be sound enough to withstand wind speed minimum 120 km / hr and minimum load of 25kg / m2 vertical members: 60x60mm, 47x47mm roof truss: 47 x 47mm, horizontal runners etc, 38 x 38 mm, truss member / other support: 32 x 32mm ± 1mm , doors: 1.2 m x 2.5 m made of gi pipe 2mm thickness with door closer & all hardware accurately sealed with door seal ( hinge type ) , covering: with clear standard polycarbonate sheet u. v. stabilized 10 mm thick four wall for roof and sides fixed with aluminium profile and silicon sealing ( for polycarbonate sheets with silicon sealing ) , shade screen: uv stabilized 50 % shading net folding system with manually operated mechanism for expanding and retracting. size of net should be equal to the floor area of green house. , fogging system: to increase the humidity up to 80% ± 5% by providing 4 way fogging nozzles hanging type, with fine discharge ( 28 30 lh ) at 4bar pressure, with pump 2.0 hp, disc filter etc. complete, spacing 1.5x1.5m ( sand filter 10 m3 / hr, disc filter 10 m3 / hr etc.as per requirement. ) , electric fitting: complete electrical wiring of green house with copper wire in pvc conduit, mcb, main switch, light / power points as per requirement all fitting / fixture should be of isi marked / standard make / brand, green house panel should be connected to main power supply source ( approx 100 m ) by laying underground / over head armored conductor make polycab or anchor or any isi standard make. , heating device: heat convector with fan blower of standard design 2.5 kw each to increase the temperature during winter season. , cooling system: evaporating with fan and with corrugated cellulose coated cooling pad 6’’thick height 5’, width, saturation efficiency :90%, as desired equipped with anodized fixed in aluminium frame, water circulating pump 1.5 hp, co axial fan ( isi mark / bis standard ) four no. 1250 mm containing 6 numbers of ss sheet blades materials followed by aluminium louver, maximum flow ( m3 / h: 23.000, sound level : 67db ( a ) , axial fan belt driven slow speed with 1.5 hp single / 3 phase motor. four air circulators ( hanging type ) net cage: to protected cooling pad from dust and direct entry of insect back side of pad area should be covered with 40 mesh net living 2m distance with provision of small door for maintenance. curtain and insect screen: roll up uv stabilized 200 micron transparent plastic film as curtain need to be provided upto height 3.0 m on pad sides having automatic type motor operated crank mechanism system. however provision for manual opening and closing of curtain s need also to be provided .40 mesh insectnet ( uv stabilized ) of equitant size need to be fixed inside the curtain .anti flapping strip is suggested to insure smooth functioning of curtain. this area is not included in 300 m2 and this is extra corridor area for maintenance. make quality system or agrolt solutions or green pro or any isistandard make. , lighting: led with weather proof fixture for visibilitymake croma or havells or syska or any isi standard make. , growing lights: led 100w having good quality range of photo synthetically active radiations distributed uniformly across chamber make croma or havells or syska or any isi standard make. , control panel: programmable logic controller cum data logger, includes temperature, humidity and photoperiodic monitoring system with cameras display : 7 lcd touch screen ( hmi ) with interface computer screen regulating / monitoring range temperature : ± 2°c display: 7” lcd touch screen ( hmi ) with interface computer screen regulating / monitoring range temperature: ±2ºc humidity: ±5% time: ±5sec / day operation system , logic and scada licence required : programmable / user selectable temperature: cooling & heating to set up to 4 cycle / day humidity : humidifier / fogging, to set up to 4 cycle / day light: rtc based on / off 8 cycle / day data logging : temperature, rh, and lux data storing: up to 15000 data with interval @ 10min time data transfer: through removable pen drive / lan system / directly to pc mountedin crc powder coated panel fitted with contact, relay, preventers sensor temperature + humidity 4 20ma data transmitter ( wall mounting type ) temperature range: 0 100°c, 1% humidity range: 0 100 %rh, 1.8% lux sensor 0 50000lux, 4 20ma o / p all power supply used for this system. 1pc : desk top, i5, 8 gb ram, 1tb hdd 22’’ tft monitor 1ups : having 1.5 2 hrs backup printer: multimedia laser jet printer ( all in one ) 1led: 43’’make: pr controls or quality system or agrolt or any isi standard make. contactor mcb / auto manual system , air curtain: 3’ wide installed above door with auto on / off switch attached with door , bench: hot dippedgalavaized steel support frame made up of 20 x40mm rectangular pipe2mm thick size 8’x3’x2.5’ made of gi pipe, with gi mesh top ( non rusted water resistance or as per requirements. ) , earth work: excavation in trenches & foundation , foundation: grouting of side poles ( 1¼’ x 1¼’ x 2.5’ below earth surface in cement concrete 1:2:4 ( 1: cement, 4 coarse sand, 4 stone aggregate ) , pcc: 1:5:10 in foundation , bricks wall: with fps bricks in 1:6 cm, all side of the green house2.0’ above gl with 1.5’ below earthsurface , plaster: 12mm thick in 1:4 cm ( 1 cement, 4 fine sand ) , flooring: 40mm thick 1:2:4, anti slippery with proper drainage slops. ( in case of benching system used ) . floor to be raised 2.5ft by filing soil from existing level along with protected retaining wall complete with rcc beam and rcc piller. , plinth protection:60 cm wide 50 mm thick 1:3:6 cc over 75 mm thick bricks bat base all side of green house. make hi tech , painting: painting of walls with 2 or more coat of apex exterior of approved colour / shade , plumbing work: for main supply 5000 ltr as main feeder tank placed on 6 7’ platform, which is connected to main water source approx 100m with necessary pvc fitting, 2 x 1000 lit misting & cooling system , wash basins: one with tape & water supply connections, excess irrigation with cocks ( 2 points ) , pvc hose pipe of 100’ length, , rain water harvesting: gutter 2.0 mm thick g.i sheet trapezoidal section, with pvc drain pipe and connected to main water reservoir approx 30 40m make: jain irrigation or finolex or any isi standard make. , power back up: there will be a sound proof ( acoustic enclosure ) power backup of 50 kva dg set with automatic panel ( for total area ) . installed undershed cc platform and proper earthing make: kirloskar or koel or any isi standard make , side vents by providing 4 window on side wall and partition wall size ( 1.0m x 0.50m ) , vent area will be covered with ss mesh, fixed with aluminium beading for complete area. , descripation : poly net house: unit area: 672 sqm length: 24.0m ( cc ) width: 28.0 m ( cc ) centre height: 5.5m gutter height: 1.0 m spacing : 6.0 x 4.0 m buffer room: size 4 m x 3 m x 3 m ( l x w x h ) with double door system shape: dome shape , main column: 76 mm od / 2 mm thickness bottom cord: 48 mm od / 2 mm thickness corridor pipe: 60 mm od / 2 mm thickness purlin and arcs: 42 mm od / 2 mm thickness foundation pipe: 60 mm od / 3 mm thickness horizontal and vertical member: 33 mm od / 2 mm thickness , doors: 2.0m x 1.0m made of anodized aluminium section with door closer & all hardware accurately sealed with door seal , covering: roof covered with uv stabilized 200 micron transparentplastic sheet, along with wire netting coverage plastic covered with net with u.v. stabilized 50 % shade net ( monofilament ) fixed with aluminium profile and zigzag spring insert. side covered with 40 mess insect net ( 120 gsm ) and bottom apron fixed on g.i. pipe 42 mm od / 2 mm thickness with profile & spring make: green pro or ginegar or suncool ( any isi standard make ) , sprinkler system: by providing micro sprinkler nozzles hanging type, with discharge ( 70 105 lh ) at 4bar pressure, with pump 1.5 hp, disc filter etc. complete, spacing 3.0 x 3.0 m make: jain irrigation or finolex or any isi standard make. , foundation: grouting of side poles ( 45x45x90 cm ) below earth surface in cement concrete 1:2:4 ( 1: cement, 4 coarse sand, 4 stone aggregate ) , pcc: 1:5:10 in foundation , bricks wall: with fps bricks in 1:6 cm, all side of the green house ( hi tech ) 1.5’ above gl with 1.5’ below earthsurface , plaster: 12mm thick in 1:4 cm ( 1 cement, 4 fine sand ) , plumbing work: for sprinkler system with necessary fitting pvc pipe, polymer tank1000 lit and connected to main storage tank , flooring: 40mm thick 1:2:4, anti slippery with proper drainage slops. floor to be raised 2.5ft by filing soil from existing level along with protected retaining wall complete with rcc beam and rcc piller. , plinth protection:60 cm wide 50 mm thick 1:3:6 cc over 75 mm thick bricks bat base all side of green house. ( hi tech ) , bench: for primary hardened tray hot dippedgalavainzed steel support frame made up of 20 x40mm rectangular pipe 2 mm thick movable size 8’x3’x2.5’ made of gi pipe, with gi mesh top ( non rusted water resistance ) . , trellising system :base wire 8mm , trellising wire :3mm steel, supporting wire : 4mm steel , storage water tank : above ground 10ft. 5000 lt. , storage room : 12’ 14’ 12’ with side walls with lantered roof , washing pit 10’ x 2’ 6’’ x 3’ covered with shed , gutter: 2mm thickness, suitable levelling with proper drainage connectivity pvc pipe. , shade screen: uv stabilized 50% shading net folding system with manually operated mechanism for expanding and retracting. size of net should be equal to the floor area of green house. make: tufflex or krushi net or green pro or any isi standard make. , trays 10000 ( 99square holes ) , cocopeat 30 qtls low ec , perlite 10 qtls , vermiculite 10 qtls...

Chaudhary Ranbir Singh University - Haryana

30208596 purchase of various furniture items for offices, class rooms, hostels and labs at chaudhary ranbir singh university, jind purchase of various furniture items for offices, class rooms, hostels and labs at chaudhary ranbir singh university, jind , executive table ( a type ) specifications: supplying & placing modular table in completely knock down conditions with an overall size 2600mm x 2100mm x 750mm that is to be assembled at site. the worktop shall be made up of 36mm thick ( top ) and 9mm thick ( base top ) pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the base of the top shall be covered with the assistance of 9mm thick extruded aluminum frame on the edges. flapper box shall be enclosed at table top. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the table top shall be supported on particle board based gable end. the end wall of the table on the side shall be topped by gable end. it should be made up of 18mm thick pre laminated particle board and profile shall be in linear shape with appropriate pvc edge banding. the gable end leg shall be provided with 70mm width made up of extruded aluminum channel having aesthetically appealing and corrosion resistance property. the table shall be clad with 18mm thick modesty panel which provide structural support for the table. it should be 18 mm thick pre laminated particle board in linear shape with appropriate pvc edge banding connected with both end. there shall be buffers provided at the base to avoid scratches on the floor. the table shall have side unit for storage purpose with an overall size 1200mm x 550mm x 760mm. the side unit shall be made up of pre laminated particle board of grade ii of is 12823 with top and side 36mm thick, drawer base 9mm and other parts 18mm thick like shutter, back, facia, panel etc. it shall have 2 drawer and 2 shutter. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. a fixed pedestal shall be provided with an overall size 400mm x 450mm x 675mm. the pedestal shall be made up of pre laminated particle board of grade ii of is 12823. the drawer base shall be 9mm thick and other parts like side, back, facia shall be 18mm thick. it shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. to protect the wall from kicks, abrasion and serve as a decorative molding, skirting shall be provided at bottom. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. , executive chair ( a type ) specifications: supplying and placing ergonomically designed, comfortable & aesthetically appealing high back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam ( 25+19 ) mm thick having density ( 40+40 ) kg / m³ with beage leatherette tapestry 0.8mm thick and 535 gsm and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience moulded polyurethane foam 40 mm thick having density 40 kg / m³ with beige leatherette tapestry 0.8 mm thick and 535 gsm with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. back shall be movable type with the assistance of gas lift provided under the seat and lever in the arm. the armrest shall be used cushion arm with leatherette tapestry and ss shiny chrome finish completely joint with seat and back. the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 65mm with gas lift to suit them using the lever under the seat.. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movement. the seat size shall be 480±10 mm ( d ) x 520±10 mm ( w ) and back size shall be 520±10 mm ( w ) x 710±10 mm ( ht ) from seat. overall height shall be = 1190±10 mm, overall depth = 750±10 mm & overall width = 750±10 mm. , executive table type b specifications: supplying & placing executive table with credenza unit and pedestal unit in completely knock down conditions with an overall size 1800 1900 mm x 750 mm x 750 mm that is to be assembled at site. the construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. the worktop shall have the size 1800 1900 mm x 800mm made up of 50mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top shall be enclosed with wire manager cap for electric provision. a pullout keyboard trey shall be provided of 18mm thick pre laminated particle board having size 550mm x 300mm. the trey shall be operated on sliding channel. the table top shall be supported on particle board base gable end. the end wall of the table on the side shall be topped by gable end. it should be made up of 25mm thick pre laminated particle board and profile shall be in linear shape with appropriate pvc edge banding. the table shall be clad with 18mm thick modesty panel which provide structural support for the table. it should be 18mm thick pre laminated particle board in linear shape with appropriate pvc edge banding connected with both end. there shall be buffers provided at the base to avoid scratches on the floor. the table shall have credenza unit for storage purpose with an overall size 900 mm x 450mm x 650mm. it should be made up of pre laminated particle board of grade ii of is 12823 with base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. it shall have 2 box drawer, 1 filing drawer and 1 shutter. it should be operated with the assistance of ss handle, concealed crank hinge and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. it shall be mounted on injection moulded nylon castor. a mobile pedestal shall be provided with an overall size 400mm x 450mm x 650mm. the pedestal shall be made up of pre laminated particle board of grade ii of is 12823. pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. the pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. the pedestal shall be mounted over injection moulded nylon castor. all the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. , executive chair ( b type ) specifications: providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam ( 40+40 ) mm thick having density ( 40 & 32 ) kg / m³ in seat and ( 30+30 ) mm thick having density ( 32, 32 ) kg / m³ in back. the same shall be upholstered with fabric. the backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with polypropylene arm with cushion base leatherette covering top. for seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas lift to suit them using the lever under the seat. the pedestal should have five legged ms crca powder coated with 50 60? dft thick having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98, 000 cycles with 250lbs load. the seat size shall be 500±10 mm ( d ) x 520±10 mm ( w ) and back size shall be 520±10 mm ( w ) x 700±10 mm ( h ) from seat. overall height shall be = 1160±10 mm, overall depth = 680±10 mm & overall width = 660±10 mm. , executive table type c specifications: supplying & placing executive table with credenza unit and pedestal unit in completely knock down conditions with an overall size 1800 1900 mm x 2000 mm x 750 mm that is to be assembled at site. the construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. the worktop shall have the size 1800mm x 800mm made up of 50mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top shall be enclosed with wire manager cap for electric provision. a pullout keyboard trey shall be provided of 18mm thick pre laminated particle board having size 550mm x 300mm. the trey shall be operated on sliding channel. the table top shall be supported on particle board base gable end. the end wall of the table on the side shall be topped by gable end. it should be made up of 25mm thick pre laminated particle board and profile shall be in linear shape with appropriate pvc edge banding. the table shall be clad with 18mm thick modesty panel which provide structural support for the table. it should be 18mm thick pre laminated particle board in linear shape with appropriate pvc edge banding connected with both end. there shall be buffers provided at the base to avoid scratches on the floor. the table shall have credenza unit for storage purpose with an overall size 1200mm x 450mm x 650mm. it should be made up of pre laminated particle board of grade ii of is 12823 with base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. it shall have 2 box drawer, 1 filing drawer and 1 shutter. it should be operated with the assistance of ss handle, concealed crank hinge and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. it shall be mounted on injection moulded nylon castor. a mobile pedestal shall be provided with an overall size 400mm x 450mm x 650mm. the pedestal shall be made up of pre laminated particle board of grade ii of is 12823. pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. the pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. the pedestal shall be mounted over injection moulded nylon castor. all the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380 , executive chair ( c type ) specifications: providing and supplying a mid back chair with ergonomic design, comfortable & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam ( 40+40 ) mm thick having density ( 40 & 32 ) kg / m³ in seat and ( 30+30 ) mm thick having density ( 32, 32 ) kg / m³ in back. the same shall be upholstered with fabric the backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with polypropylene arm with cushion base leatherette covering top. for seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas lift to suit them using the lever under the seat. the pedestal should have five legged ms crca powder coated with 50 60? dft thick having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98, 000 cycles with 250lbs load. the seat size shall be 500±10 mm ( d ) x 520±10 mm ( w ) and back size shall be 520±10 mm ( w ) x 700±10 mm ( h ) from seat. overall height shall be = 1160±10 mm, overall depth = 680±10 mm & overall width = 660±10 mm. , visitor chair ( a ) specifications providing and supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam ( 40+40 ) mm thick having density ( 40, 32 ) kg / m³ in seat and ( 30+30 ) mm thick having density ( 32, 32 ) kg / m³ in back. the same shall be upholstered with leatherette tapestry 1 mm thick and 571 gsm. the backrest shall be made by keeping the natural curvature of the spine for back support. the chair shall be supplied with polypropylene arm with cushion base fabric covering top. the frame structure shall be cantilever support type made of crca powder coated 50 60? thick round pipe of dia. 28.5mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 500±10 mm ( d ) x 520±10 mm ( w ) and back size shall be 520±10 mm ( w ) x 625±10 mm ( h ) from seat. overall height shall be = 1040±10 mm, overall depth = 680±10 mm & overall width = 660±10 mm. , three seater sofa specifications: supplying and placing three seater sofa that shall be constructed from natural hard wood and marine grade as per is: 710 plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the structure shall be upholstered with fabric dual tone. the understructure shall consist of ss 304 grade legs having cross section area 40 mm x 20 mm x 1.6 mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10 mm ( d ) x 1650±10 mm ( w ) , seat height = 450±10 mm, overall width = 2320±10 mm, overall depth = 900±10 mm & overall height = 820±10 mm. , two seater sofa ( reg ) specifications: supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the structure shall be upholstered with fabric dual tone. the understructure shall consist of ss 304 grade legs having cross section area 40 mm x 20 mm x 1.6mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10 mm ( d ) x 550±10 mm ( w ) , seat height = 450±10 mm, overall width = 1120±10 mm, overall depth = 900±10 mm & overall height = 820±10 mm. , one seater sofa ( reg ) specifications: supplying and placing single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the structure shall be upholstered with fabric dual tone. the understructure shall consist of ss 304 grade legs having cross section area 40 mm x 20 mm x 1.6mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10 mm ( d ) x 550±10 mm ( w ) , seat height = 450±10 mm, overall width = 1120±10 mm, overall depth = 900±10 mm & overall height = 820±10 mm. , centre table ( a type ) specifications supplying & placing center table with an overall size 1200mm x 600mm x 450mm. the top shall be made up of 12mm thick toughened glass. the profile shall be in rectangle shape with bevelled edges. the bottom storage shelf shall be provided with an overall size 1155mm x 280mm made of 8mm thick toughened glass with bevelled edges. the glass shall be supported on vacuum caps situated over ss 304 grade pipe frame. the under structure shall have ss pipe frame having size 67mm x 13.5mm. there shall be ppcp shoe provided to avoid scratches on the floor. , side table ( a type ) specifications: supplying & placing center table with an overall size 600mm x 600mm x 450mm. the top shall be made up of 12mm thick toughened glass. the profile shall be in square shape with bevelled edges. the bottom storage shelf shall be provided with an overall size 555mm x 280mm made of 8mm thick toughened glass with bevelled edges. the glass shall be supported on vacuum caps situated over ss 304 grade pipe frame. the under structure shall have ss pipe frame having size 67mm x 13.5mm. there shall be ppcp shoe provided to avoid scratches on the floor. , side table ( b type ) specifications: supplying & placing center table with an overall size 600mm x 600mm x 450mm. the top of the table shall be made up of 18 mm ply and 1 mm thick mica laminated. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius and should have matching shade. the profile shall be in square shape with bevelled edges. the bottom storage shelf shall be provided with an overall size 555mm x 280mm made of 8mm thick toughened glass with bevelled edges. the glass shall be supported on vacuum caps situated over ss 304 grade pipe frame. the under structure shall have ss pipe frame having size 67mm x 13.5mm. there shall be ppcp shoe provided to avoid scratches on the floor. , centre table ( b type ) specifications: supplying & placing center table with an overall size 1200mm x 600mm x 450mm. the top of the table shall be made up of 18 mm ply and 1 mm thick mica laminated. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius and should have matching shade. the profile shall be in rectangle shape with round corner. the top shall be supported on ss 304 grade frame with cross section area 40mm x 20mm with 1.6mm thick. the under structure shall consist of four legs made of ss 304 garade oval pipe having cross section area 52mm x 26mm with 1.6mm thick. there shall be co polymer polypropylene shoe provided at the bottom to avoid scratches on the floor. , visitor chair ( type b ) specifications: providing and supplying visitor chair with ergonomic design for user comfort. the seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg / m³ in seat and 45mm thick having density 35kg / m³ in back. the same shall be upholstered with fabric tapestry 1mm thick and 300 gsm. the back and base of chair shall be supplied with polypropylene / abs moulded cover and the backrest shall be made by keeping the natural curvature of the spine. the seat and back shall be arrested together with 50 60? thick powder coated hr steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. the frame structure shall be cantilever support type made up of crca powder coated with 50 60? ( dft ) thick round pipe of dia. 25.4mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 480±10 mm ( w ) x 450±10 mm ( d ) and back size shall be 480±10 mm ( w ) x 400±10 mm ( h ) from seat & overall height = 820±10 mm. , study table specifications: supplying and placing table in knock down condition with an overall size 1200mm x 600mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top shall be supported on crca rectangle pipe frame having cross section area 40mm x 20mm with 1.6mm thick. the table understructure shall be supplied with crca round pipe having dia. 25.4mm with 1.6mm thick. 1 nos. footstep shall be provided between both side leg with the same size i.e dia. 25.4mm with 1.6mm thick. fixed pedestal metallic unit shall be supplied with 3 nos. of drawer at one side. all the drawer shall be synchronized locked with central locking mechanism by one single key. the drawer shall be operated with recessed handle. all the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. , study chair specifications providing and supplying chair the seat shall be made of 12mm thick hot pressed plywood upholstered with high resilience polyurethane foam ( 50+19 ) mm thick having density 40kg / m³ and the back shall be made of pipe frame upholstered with high resilience polyurethane foam ( 19+19 ) mm thick having density 23kg / m³. the same shall be upholstered with fabric. the armrest shall be used cushion arm mounted on pipe frame. the frame structure shall be cantilever support type made up of ss 304 grade chrome finish round pipe of dia 25.4mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 480±10 mm ( d ) x 510±10 mm ( w ) and back size shall be 510±10 mm ( w ) x 440±10 mm ( h ) from seat. overall height shall be = 870±10 mm, overall depth = 660±10 mm & overall width = 560±10 mm. , clerk table specifications: supplying and placing a modular table with an overall size 1200mm x 600mm x 750mm. the top of the table shall be made of 18mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel with the assistance of edge banding machine at 200 degree celsius. the top shall be supported on crca rectangle pipe frame having cross section area 40mm x 20mm with 1.6mm thick. the table understructure shall be supplied with crca rectangle pipe having cross section area 40mm x 20mm. the gable end shall be given at one side made up of 0.8mm thick perforated high yield strength crca sheet of grade d confirming to is:513. fixed pedestal unit with powder coated metallic body shall be supplied with 3 nos. of drawer i.e. 2 box+1 filing at one side. all the drawer shall be synchronized locked with central locking mechanism by one single key. the drawer shall be operated with abs plastic recessed handle. the manufacturer shall have basic quality and safety certifications like iso 9001:2015, iso 14001: 2015, iso 18001:2007. , book case specifications: providing and supplying metal book case with an overall size 915 mm ( w ) x 320 mm ( d ) x 1750mm ( h ) . the book case shall be supplied with 4 nos. of individual compartments. top, back & side panels shall be made of 0.8mm and rest 1mm high yield strength crca sheet of grade ‘d’ confirming to is: 513. each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. each door shall have plastic side end caps as handle which is easy to grip. each compartment has a storage shelf having uniformly distributed load capacity of each shelf is 40 kg maximum. the finish is epoxy polyester powder coated to the thickness of 40 60?. adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. , library rack specifications: providing, supplying and placing double side steel library racks in perfectly upright and straight position. the overall size of the rack shall be 940mm ( w ) x 600mm ( d ) x 2110mm ( h ) . the rack shall be supplied with 4 nos. of adjustable shelves on both side i.e. 10 loading levels. rack, side panel, skirting shall be made of 0.8mm thick high yield strength crca sheet of grade ‘d’ confirming to is: 513. side and top shall be covered with 18mm thick pre laminated particle board of grade ii of is 12823. the edges of the board shall be sealed with 2mm thick pvc edge banding. the add on units can be stacked width wise to form a bank of racks having common side panel. the shelves shall be folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity per each shelf shall be 80kg maximum. each shelf shall be provided with stiffener at bottom for strength and back stiffener for separator between front and rear shelf. all steel components shall be epoxy polyester powder coated to the thickness of 40 60?. adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. , storage rack specifications: providing, placing and installing a slotted angle rack with an overall size 900mm ( w ) x 400 mm ( d ) x 1800mm ( h ) . the panel shall have 5 nos. of shelves made up of 1.2 mm thick high yield strength crca sheet of grade ‘d’ confirming to is: 513. crca slotted angle shall be supplied with 3 mm thick having size 40mm x 40mm. all steel components shall be 40 60? thick ( dft ) powder coated after 7 tank pre treatment process flow. corner plate ( gussets ) and fasteners shall be provided for complete assembly. , computer table specifications: supplying & placing computer desk with an overall size 1500mm ( w ) x 750mm ( d ) x 750mm ( h ) . it should have work top made up of 25mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top board shall be supported on fixed pedestal at one end and fixed cpu unit at another end. the desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. the modesty panel shall have the size 690mm x 600mm with 18mm thick pre laminated particle board connected with both end. 18mm thick pre laminated board base keyboard tray shall be provided with an overall size 684mm x 350mm. the keyboard trey shall be operated by sliding channel to enable smooth operation. a fixed pedestal shall be provided with the size 400mm x 620mm x 725mm at one end with 3 drawer operated on roller channel and 1 filing drawer operated on ball bearing channel. all drawer shall be operated with ss handle with multi purpose ( mp ) locking mechanism. other side of table open type storage shall be provided with the size 400mm x 600mm x 725mm having one adjustable shelf to accumulate cpu. complete understructure made in 18mm thick pre laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. to protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. , three seater visitor bench specifications: supply and installation of bench 3 seater for waiting room: cross beam shall be made up of black powder coated rectangular m.s.erw tube having 8 ± 0.03 cm x 4 ± 0.03 cm x 0.2 ± 0.014 cm size. leg and armrest shall be chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness. seat back shell shall be 1.6 mm thk powder coated perforated shell made from cold rolled m.s. sheet 0.14 ± 0.013 em thickness. theside bar shall be made of chrome plated solid steel 3 ± 0.03 cm x 1.2 ± 0.3 cm ( din174 ) with fluting and plastic inserts.the shell shall be assembledon the cross beam with help of m8 bolts ( per seat 8 nos. seat to bracket and 4nos. bracket to cross beam ) . the seat & back cushion shall be made up of pu foam upholstered with leather cloth or fabric with plywood. overall dimensions shall be seat height 40.0cm, height 67.5cm, width & depth of chair as measured from pedestal width 163.0cm and depth 57.0 cm. , student desk cum bench specifications: the class room desk consists of front desk, middle row comprising of seat for front desk, back supported & jointed with it the desk behind for another seat, back & another desk for the person sitting behind and so on till the last row which shall consist of seat only, provided with back support. thus the desking system shall consist of one row of front desk, several rows of middle seat & back desk & again one last row of back seat. a. front desk: top size: 1200mm x 375mm x 18mm thick for two seater desk. ( 36 nos. ) top size: 1800mm x 375mm x 18mm thick for three seater desk. ( 180 nos. ) made of 18mm thick commercial plywood on top, front and rear edges. 800mm high in front and 750mm inside shall be fixed to the main frame with steel inserts and galvanized bolts. all exposed sides shall be protected with 2.0mm thick pvc edge binding tape affixed with hot melt glue. all the exposed edges shall be made 36 mm ( 18+18mm ) and 1 mm thick laminate on top, front and rear. below the top is provided a storage shelf for the students to keep their bags, books etc. the vertical leg supporting the storage shelf below the working top must provide enough leg room for ease in moving in & out of desk. also, there should be no sharp edges of the side supports to prevent hurting while moving in & out. the front of the desk should be cladded with 18mm thick commercial plywood plus 1 mm laminate, held inside the front frame with edges within the frame to provide protection to the board on edges.underside of the table shall be finished with 0.6 mm thick laminate of white colour. b. middle seat & desk: shall consist of seat, back & writing shelf behind and storage shelf below it. the detail specifications will be as under: seat size: 1200mm x 375mm x 18mm thick for two seater desk. seat size: 1800mm x 375mm x 18mm thick for three seater desk. made up of 18mm thick commercial plywood on top, front and rear edges shall be fixed to the main frame with steel inserts and galvanized bolts. all exposed sides shall be protected with 2.0mm thick pvc edge binding tape affixed with hot melt glue. all the exposed edges shall be made 36 mm ( 18+18mm ) and 1 mm thick laminate on top, front and rear. underside of the table shall be finished with 0.6 mm thick laminate of white colour. back size: 1200mm x 375mm x 18mm thick for two seater desk. back size: 1800mm x 375mm x 18mm thick for three seater desk. made up 18mm thick commercial plywood on top, front and rear edges ) shall be fixed to the main frame with steel inserts and galvanized bolts. all exposed sides shall be protected with 2.0mm thick pvc edge binding tape affixed with hot melt glue. all the exposed edges shall be made 36 mm ( 18+18mm ) and 1 mm thick laminate on top, front and rear. underside of the table shall be finished with 0.6 mm thick laminate of white colour. writing shelf: 1200mm x 375mm x 18mm thick for two seater desk. writing shelf size: 1800mm x 375mm x 18mm thick for three seater desk. shall be made of 18mm thick commercial plywood on top, front and rear edges 36mm below the top edge of the back to prevent interference with student sitting on the front seat. c. last row: ( back row ) the last row consists of seat & back only mounted on 50 x 25 x 1.6mm thick crca pipe frame. back row size: 1200mm x 375mm x 25m thick for two seater desk. back row size: 1800mm x 375mm x 18mm thick for three seater desk. made up of 18mm thick commercial plywood on top, front and rear edges shall be fixed to the main frame with steel inserts and galvanized bolts. all exposed sides shall be protected with 2.0mm thick pvc edge binding tape affixed with hot melt glue. all the exposed edges shall be made 36 mm ( 18+18mm ) and 1 mm thick laminate on top, front and rear. underside of the table shall be finished with 0.6 mm thick laminate of white colour. the frame shall be made from 50 x 25 x 1.6mm thick crca steel pipes. suitably designed for maximum strength & stability. only for the provision of the storage shelf and cladding fixing, 25 x 25 x 1.6mm thick crca pipe shall be used. the entire cladding, shelving shall be pre laminated particle 17mm thick. the seat, back & writing desk shall be 25mm thick particle, laminated on both sides, top laminate & balancing laminate on back as mentioned above. all the frame front, middle and last row shall be affixed to floor with 8 x 75mm anchor fasteners. also, the top, back & seat shall be affixed with metal inserts & galvanized bolts. wood screws shall not be used anywhere steel welding wherever required, shall be done by mig welding process to minimize distortion and for the deep penetration of the weld. all the steel components shall be pre treated for de greasing, de rusting and phosphating. after proper pre treatment, the steel components shall epoxy power coated and oven baked at temp. above 200 deg. c to provide scratch resistance surface coating film of thickness 50 60 microns. note: 1. crca steel pipes shall be of tata / jindal make. 2. all pre laminated particle boards shall be of action tesa / marino / godrej make. two seater , three seater , big almirah specifications: providing, supplying and placing steel almirah in perfectly upright and straight position. the overall size of the almirah shall be 915mm ( w ) x 485mm ( d ) x 1980mm ( h ) including legs. it should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength crca sheet of grade ‘d’ confirming to is: 513. stiffeners shall be provided in shelf & door. the steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity per each shelf shall be 40kg maximum. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50 60?. , supply and installation of recta workstations 900w x 600d providing and placing tile based modular workstation, with partitionthickness as 50 60 mm and ht 1200 including powder coated aluminium trims.tiles on main spine: combination of top tiles are plb / fabric tackable / whiteboard tile. bottom tiles plain metal. fin: 22.5 mm thk panel formed out of blocks which are 2x9 mm thk plb boards wrapped with laminate at intermediate block and top block. bottom block is finished in metal finish. split tiles on main spine: combination of two finishes for the top tiles on the user side shall be decorative laminate / white board. intermediate blocks on main spine intermediate blocks are given in dl + dl finish. ( decorative laminate ) wire management through main spine wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. the partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. necessary cut outs for switches as per site requirement will be provided. cost of switches and wires not to be considered in furniture. it will be supplied by department separately. side panels or legs made of 25 mm thick pre laminated particle board with flat pvc lipping edge binding tape considered only on the open end conditions or metal powder coated legs at the end and shared condition. pvc edge binding tape should be from rehau or dolken of germany. system shall have 120 mm high powder coated standalone panel legs to give the system an elevated look. work surface made of 25 mm thick pre laminated particle board confirming to is:12823 interior grade with post forming on front only of size 900 mm w x 600 mm d. note: all partitions and side panels have leveling screws for adjustment in case of uneven floor to take care of + / 20 mm of uneven flooring.raceway: the raceways are made out of 0.8mm thick crca & powder coated. the electrical raceway can be provided below worktop or above worktop, these are hook on type which will be mounted on the verticals. the skirting / data raceway is hollow and will be mounted on the raceway channels cpu trolley fixed type:cpu trolley: the metal tray is made of 1.0 mm thick crca sheet and side support is made of 0.8 mm thick crca sheet. on wall side ( with common side partition sharing ) , back to back ( with common side partition as well as common central ) , chairs for lab clerk computer without arm revolving: specifications: providing, supply and placing the seat and back is made up of 12mm thick ( 7 layers ) hot pressed plywood / pvc frame moulded in polyurethane foam of density 45±2kg / m3. the dimensions of seat shall be minimum 45.0cm ( w ) x 42.0cm. ( d ) and of back shall be 40.0cm ( w ) x 47.0cm. ( h ) . the seat and back covers shall be injection moulded in black co polymer polypropylene. the back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. the hr polyurethane foam shall be moulded with density.=45±2.kg / m3and hardness load 16±2 kgf as per is:7888.for 25% compression. the permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, upright position locking, tilt tension adjustment. the pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. the bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. the pedestal shall be injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. the pedestal shall be 62.0 ±0.5cm. pitch centre dia. ( 72.0 ±1.0cm with castors ) . the twin wheel castors shall be injection moulded in black nylon. overall dimensions of chair shall be seat height min 43.0 to max 54.0cm, height min87.5 to max 98.5cm, width & depth of chair as measured from pedestal width 71.0 cm and depth 71.0 cm. gas lift: gas lift pipe diameter 50mm and has an height adjustment stoke of 110mm. , supply and installation of line programmer computer labs specifications: table 1500w x 750d x 750h providing and placing table 1500w x 750d x 750h desk based modular workstation with system ht 750mm. understructure: made of erw pipe 50 x 50 x 1.6mm thick duly powder coated with 50 60 micron. comprising of metal powder coated l connectors between legs, legs made up of metal powder coated finish and the entire assemply is fixed to the worktop with the help of abs plastic spacers 20 mm high which gives the floating look to the w / s module. wire management : metal powder coated cable pole of size 170mm w x 85 mm d x 705 mm ht is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. aluminium access flaps on worktop above power box cut out for accessing switches. to carry wires forward through w / s mesh type wire carrier assembly is provided below worktops. modesty panels 25 mm thk plb modesty x 450 mm wide. work surface out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500w x 750d x 750h...

Chaudhary Devi Lal University - Haryana

29909382 supply of furniture for teaching block no. 4 at cdlu, sirsa. supply of furniture for teaching block no. 4 at cdlu, sirsa. , supply of three seater dual deska ) classroom desk of 1525mmlong in first row, comprising of 25mm pre laminated post formed hdf board of superior quality on top of desk and seat of bench, however, front of first row shall be 18mm pre laminated on both side hdf board of superior quality with writing surface 380mm wide, duly supported over a steel frame of crca pipe, 25x25x1.6mm and 25x40x1.6mm as per sketch properly designed and jointed with m.i.g. welding so as to achieve rigidity of frame and strength of welded joints. all steel parts shall be thoroughly pre treated for degreasing de rusting, phosphating and passivation, before being powder coated and baked in oven, so as to obtain scratch resistant surface with an average thickness of painted surface as 45 microns. desk should be fixed on floor, with steel anchor bolts & with entire satisfaction of engineer in charge. , b ) classroom desk cum benches of 1525mm long in middle row, comprising of 25mm pre laminated post formed hdf board of superior quality on top of desk and seat of bench, however, back of bench shall be 18mm pre laminated on both side hdf board of superior quality laminated on both side with seat and writing surface 380mm wide, back 300mm duly supported over a steel frame of crca pipe, 25x25x1.6mm and 25x40x1.6mm properly designed and jointed with m.i.g. welding so as to achieve rigidity of frame and strength of welded joints. all steel parts shall be thoroughly pre treated for degreasing de rusting, phosphating and passivation, before being powder coated and baked in oven, so as to obtain scratch resistant surface with an average thickness of painted surface as 45 microns. desk should be fixed on floor, with steel anchor bolts & with entire satisfaction of engineer in charge. , c ) classroom benches of 1525mm long in back row, comprising of 25mm pre laminated post formed hdf board of superior quality over seat of bench, however, back of desk shall be 18mm pre laminated on both side hdf board of superior quality comprising of seat 380mm wide & back 300mm wide with a gap of 150mm from seat duly supported over a steel frame of crca pipe, 25x25x1.6mm and 25x40x1.6mm properly designed and jointed with m.i.g. welding so as to achieve rigidity of frame and strength of welded joints. all steel parts shall be thoroughly pre treated for degreasing de rusting, phosphating and passivation, before being powder coated and baked, so as to obtain scratch resistant surface with an average thickness of painted surface as 45 microns. desk should be fixed on floor, with steel anchor bolts & with entire satisfaction of engineer in charge. , supply of podium for lecture hallthe lecture dais to be made out of 19 x 19 sq. mm crca pipe 1.2mm thick having a 3 step pedestal at base to impart elegance& rigidity to the dais. the frame to be cladded with 18 mm thick hdf pre laminated board. the height of the podium facing the speaker is 1090mm for a total front height of 1200mm. the standing surface on top having a working area of 550mm x 430mm to be provided for addressing the audience; the 550mm front edge of this board is post formed board. one shelf is provided below the top post formed surface for any accompaniment for use of the speaker / lecture. a footrest is provided at 175mm above the base for the comfort of the user. all metal components are powder coated and oven baked after proper pre treatment as per sketch. , supply of white writing board supplying wall mounting white writing board having size 1200 x 3600mm, writing top surface shall be made of steel sheet of thickness 0.3 to 0.4mm and shall have vitreous enameled coating of 0.11mm minimum thickness on top and 0.03mm minimum on the back pasted over 6 to 9mm thick mdf board with electro galvanized backing sheet. the frame shall be made of anodized extruded aluminum alloys hollow section designation 63400 as per is1285 2002 ( re affirmed ) of size 20mm x 16mm x 1.2mm along with perfect hanging system on the wall. the top of writing board shall be free from waviness and shall show no scratches when hb two three h pencils are used for writing. the surface shall show excellent erased ability when the specified writing medium is used. it should be possible to fully erase the marking of permanent markers pens using methanol of brand promark or equitant as per sketch. , supply of auditorium chair supply of auditorium chair floor mounted type for seminar hall having following specifications : back rest width 520mm, back height 800mm, arm to arm inner width 530mm, back rest to floor height 1050mm, seat width 480mm, seat depth 460mm, seat thickness 150mm, seat with auto tip up mechanism with push back feature, seat rest assembled with 12mm thick flat plywood isi moulded with polyurethane foam and upholstered with 3 layer foam laminated fabric and injection moulded cover, fixed the under structureby anchors with washer and nut to ground, side panel made up of 2mm thick cr steel each side panel is clad with two fabric upholstered board of 9mm thick, leg frame fabricated with ms tube 60x40x2mm thick welded with grouting member, foldable writing pad, all steel component should be epoxy polyester powder coated40 60 microns. , supply of desk cum benchdesk cum bench of required length comprising of 25mm thick pre laminated post formed hdf board of superior quality laminated on both side and of required thickness at seat and back. seat 330mm wide, back 300mm wide and writing surface 355mm wide. the side edges shall be sealed with 2mm thick strip of impermeable pvc i.e. cut to fit the size of board panel and duly pasted with the assistance of edge bending machine at 200º c, duly supported over a steel frame of crca pipe 25 x 25mm x 1.6mm and 25 x 40mm 1.6mm properly signed and jointed with mig welding so as to achieve rigid of the frame and strength of welded joints as per sketch. all steel parts shall be pre treated in 4 step anticorrosion treatment ( degreasing, pickling, phosphating and passivation ) before being powder coated and baked in oven so as to achieve 40 45 micron thickness of powder and a complete scratch resistant surface and superb finish. the colour and finish of the powder will be as per requirement of engineer in charge.desk full front covered ( front row ) , desk cum bench of middle row , bench back row , supply of lockers cabinet supply of lockers cabinet of size 1980 x 910 x 480mm ( 18 lockers with pad lock 100% powder coated of model no. dks 918b delite kom or equivalent model of any other make with same specification. front door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength crca sheet of grade d confirming to is513. stiffness shall be provided in door as per sketch and model. , supply of office table bigexecutive table ( a type ) specifications: supplying & placing modular table in completely knock down conditions with an overall size 2600mm x 2100mm x 750mm that is to be assembled at site. the worktop shall be made up of 36mm thick ( top ) and 9mm thick ( base top ) pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the base of the top shall be covered with the assistance of 9mm thick extruded aluminium frame on the edges. flapper box shall be enclosed at table top. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degrees celsius. the table top shall be supported on particle board based gable end. the end wall of the table on the side shall be topped by gable end. it should be made up of 18mm thick pre laminated particle board and profile shall be in linear shape with appropriate pvc edge banding. the gable end leg shall be provided with 70mm width made up of extruded aluminium channel having aesthetically appealing and corrosion resistance property. the table shall be clad with 18mm thick modesty panel which provide structural support for the table. it should be 18 mm thick pre laminated particle board in linear shape with appropriate pvc edge banding connected with both end. there shall be buffers provided at the base to avoid scratches on the floor. the table shall have side unit for storage purpose with an overall size 1200mm x 550mm x 760mm. the side unit shall be made up of pre laminated particle board of grade ii of is 12823 with top and side 36mm thick, drawer base 9mm and other parts 18mm thick like shutter, back, facia, panel etc. it shall have 2 drawer and 2 shutter. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. a fixed pedestal shall be provided with an overall size 400mm x 450mm x 675mm. the pedestal shall be made up of pre laminated particle board of grade ii of is 12823. the drawer base shall be 9mm thick and other parts like side, back, facia shall be 18mm thick. it shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. to protect the wall from kicks, abrasion and serve as a decorative molding, skirting shall be provided at bottom. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. , supply of high back revolving chairexecutive chair ( a type ) specifications: supplying ergonomically designed, comfortable & aesthetically appealing high back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam ( 25+19 ) mm thick having density ( 40+40 ) kg / m³ with beage leatherette tapestry 0.8mm thick and 535 gsm and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience moulded polyurethane foam 40mm thick having density 40 kg / m³ with beige leatherette tapestry 0.8mm thick and 535 gsm with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. back shall be movable type with the assistance of gas lift provided under the seat and lever in the arm. the armrest shall be used cushion arm with leatherette tapestry and ss shiny chrome finish completely joint with seat and back. the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with gas lift to suit them using the lever under the seat. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 700mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movement. the seat size shall be 480±10mm ( d ) x 520±10mm ( w ) and back size shall be 520±10mm ( w ) x 710±10mm ( ht ) from seat. overall height shall be = 1190±10mm, overall depth = 750±10mm & overall width = 750±10mm. , supply of visitor chairvisitor chair ( a ) specifications: supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam ( 40+40 ) mm thick having density ( 40, 32 ) kg / m³ in seat and ( 30+30 ) mm thick having density ( 32, 32 ) kg / m³ in back. the same shall be upholstered with leatherette tapestry 1mm thick and 571 gsm. the backrest shall be made by keeping the natural curvature of the spine for back support. the chair shall be supplied with polypropylene arm with cushion base fabric covering top. the frame structure shall be cantilever support type made of crca powder coated 50 60μ thick round pipe of dia. 28.5mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 500±10mm ( d ) x 520±10mm ( w ) and back size shall be 520±10mm ( w ) x 625±10mm ( h ) from seat. overall height shall be = 1040±10mm, overall depth = 680±10mm& overall width = 660±10mm. , supply of ss stackable chair supply of stackable chair with s.s legs, polypropylene seat and back with arms of size 600 w x 555 d x 765 h mm as per novella 10 of nilkamal or equivalent brand. , three seater visitor benchspecifications: supply of bench 3 seater for waiting room: cross beam shall be made up of black powder coated rectangular m.s.erw tube having 8 ± 0.03 cm x 4 ± 0.03cm x 0.2 ± 0.014cm size. leg and armrest shall be chrome plated made of cold rolled steel with 0.12 ± 0.013cm thickness. seat back shell shall be 1.6 mm thick powder coated perforated shell made from cold rolled m.s. sheet 0.14 ± 0.013 cm thickness. the side bar shall be made of chrome plated solid steel 3 ± 0.03cm x 1.2 ± 0.3cm ( din174 ) with fluting and plastic inserts. the shell shall be assembled on the cross beam with help of m8 bolts ( per seat 8 nos. seat to bracket and 4nos. bracket to cross beam ) . the seat & back cushion shall be made up of pu foam upholstered with leather cloth or fabric with plywood. overall dimensions shall be seat height 40.0cm, height 67.5cm, width & depth of chair as measured from pedestal width 163.0cm and depth 57.0 cm. , supply of office steel big almirahbig almirah specifications: supplying steel almirah in perfectly upright and straight position. the overall size of the almirah shall be 915mm ( w ) x 485mm ( d ) x 1980mm ( h ) including legs. it should be supplied with 4 nos. shelves i.e. 5 loading compartments. door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength crca sheet of grade ‘d’ confirming to is: 513. stiffeners shall be provided in shelf & door. the steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40kg maximum. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50 60 micron. , supply of file racksupply of5 shelves, closed type steel file racks of size 1800x910x375mm, 100% powder coated side & shelves made up of 0.8mm crca as per model no. dks 14c of dlite kom, godrej, geeken, featherite, nilkamal or equivalent. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50 60 micron as per sketch. , supply and installation of recta workstations supply of 900wx600d tile based modular workstation, with partition thickness as 50 60mm and ht 1200 including powder coated aluminium trims.tiles on main spine: combination of top tiles is plb / fabric tack able / whiteboard tile. bottom tiles –plain metal. fin: 22.5mm thick panel formed out of blocks which are 2x9 mm thick plb boards wrapped with laminate at intermediate block and top block. bottom block is finished in metal finish. split tiles on main spine: combination of two finishes for the top tiles on the user side shall be decorative laminate / white board. intermediate blocks on main spine intermediate blocks are given in dl + dl finish. ( decorative laminate ) wire management through main spine wires shall be taken into the system through cable ducts from the junction boxes and it is carried up to the panels through concealed conduits inside the blocks. the partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. necessary cut outs for switches as per site requirement will be provided including supply and fixing of electrical, data, power switch as per requirement. side panels or legs made of 25 mm thick pre laminated particle board with flat pvc lipping edge binding tape considered only on the open end conditions or metal powder coated legs at the end and shared condition. pvc edge binding tape should be from rehau or dolken of germany. system shall have 120mm high powder coated standalone panel legs to give the system an elevated look. work surface made of 25mm thick pre laminated particle board confirming to is: 12823 interior grade with post forming on front only of size 900mm w x 600mm. note: all partitions and side panels have levelling screws for adjustment in case of uneven floor to take care of + / 20mm of uneven flooring.raceway: the raceways are made out of 0.8mm thick crca & powder coated. the electrical raceway can be provided below worktop or above worktop, these are hook on type which will be mounted on the verticals. the skirting / data raceway is hollow and will be mounted on the raceway channels cpu trolley fixed type:cpu trolley: the metal tray is made of 1.0mm thick crca sheet and side support is made of 0.8mm thick crca sheet. on wall side ( with common side partition sharing ) , back to back ( with common side partition as well as common central ) , supply of staff work stationproviding / supplying workstations ( as per layout provided ) with of 50mm thick partition panel base system of 1200mm height with a provision to carry wire through the frame at below the top and at skirting level. the size of the work station for each individual user shall be 1200 x 600 x 750mm. the finish – lower module pre laminated and upper module fabric pinup ( magnetic / soft ) with one metallic kbt, metallic cpu trolley, one paper tray and one three drawer steel pedestal has detailed below: partition specification: the system should have partition of height 1200mm. the frame work for the partition comprise of tile based partition of 50mm thick of height 1200mm with skirting height of 100mm. raceway made of crca sheet of 0.8 1.00mm thick including m 10 x 50 leveller with electrical, data, power switch provision as per requirement and have 35 40mm minimum clear space between 2 tile for wire management facilities. the basic frame work is made of aluminium with thickness 1.2mm. vertical and horizontal rail is made up of 1.2 thick of aluminium extrusions. the thickness of power coating for all the aluminium / crca steel parts shall be minimum 50 micron. lower module: tile finish shall be pre laminated hdf board and upper module shall be fabric. laminated tile consists of 9mm thick pre lame hdf board. fabric tile: consists 3.5 – 4.00mm thick medium density fibre board with fabric upholstered of approved shade pasted.work top specifications: worktop shall be made of 25mm thick pre laminated hdf board of approved shade. all the edge of work surface shall be provided with machine pressed 1.2 2mm thick pvc lipping glued with hot melt glue. the work surface are mounted on the work surface brackets of 2 – 2.5mm thick crca steel. corner brackets used to support the work surface at corner junction of the frame. gable and made of 25mm thick pre laminated hdf board will be attached to the upright using gable and bar and brackets. all the brackets are powder coated to minimum thick 45 microns.cluster for single persons type ( one person each seat ) , cluster t shaped for two persons ( 12 nos. ) , cluster for three persons ( 4 nos. ) , clusters for four persons + shape ( 4 nos. ) , supply of low back computer chairs supply of low back computer chairs with arms.the seat and back shall be made from 1.2 ±0.1cm thick. hot pressed plywood and shall be upholstered with fabric and moulded polyurethane foam together with seat and back covers. the back foam shall be designed with contoured lumbar support for extra comfort. the dimensions of seat shall be 45.0 cm ( w ) x 42.0cm ( d ) and of back shall be 40.0cm ( w ) x 47.0cm ( h ) . the seat and back covers shall be injection moulded in black co polymer polypropylene. the hr polyurethane foam shall be moulded with density=45±2.kg / m3 and hardness load 16±2 kgf as per is: 7888.for 25% compression. the one piece armrests are injection moulded from black nylon. the armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thick. hr steel.the permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, upright position locking and tilt tension adjustment. the pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. the bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. the pedestal shall be injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. the pedestal shall be 62.0 ±0.5cm. pitch centre dia. ( 72.0 ±1.0cm with castors ) . the twin wheel castors shall be injection moulded in black nylon. overall dimensions of chair shall beseat height min 43.0 to max 54.0cm, height min87.5 to max 98.5cm, width & depth of chair as measured from pedestal width 71.0 cm and depth 71.0 cm. , supply of conference tablesupply of conference table oval shape for 12 persons of size 3900 ( w ) x1200 ( d ) x 750 ( h ) mmwith top made of 25mm pre laminated hdf board with 2mm thick pvc beading all over. the legs are made from 18mm thick plt having curved profile. the modesty made from pre laminated twin boards 18mm thick in two shades. a wire manager along the width of desk fitted on the modesty panel from inside in any configurations to suit different conference room as desired by engineer in charge as per sketch. , supply of revolving conference chair specifications: supplying a mid back chair with ergonomic design, comfortable & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam ( 40+40 ) mm thick having density ( 40 & 32 ) kg / m³ in seat and ( 30+30 ) mm thick having density ( 32, 32 ) kg / m³ in back. the same shall be upholstered with fabric the backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with polypropylene arm with cushion base leatherette covering top. for seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas lift to suit them using the lever under the seat. the pedestal should have five legged ms crca powder coated with 50 60μ dft thick having pitch circle dia. 660mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98, 000 cycles with 250lbs load. the seat size shall be 500±10mm ( d ) x 520±10mm ( w ) and back size shall be 520±10mm ( w ) x 700±10mm ( h ) from seat. overall height shall be = 1160±10mm, overall depth = 680±10mm & overall width = 660±10mm. , supply of three seater sofaspecifications: supplying three seater sofa that shall be constructed from natural hard wood and marine grade as per is: 710 plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the structure shall be upholstered with fabric dual tone. the under structure shall consist of ss 304 grade legs having cross section area 40mm x 20mm x 1.6mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10mm ( d ) x 1650±10mm ( w ) , seat height = 450±10mm, overall width = 2320±10mm, overall depth = 900±10mm & overall height = 820±10mm. , supply of side tablespecifications: supplying side table with an overall size 600mm x 600mm x 450mm. the top shall be made up of 12mm thick toughened glass. the profile shall be in square shape with bevelled edges. the bottom storage shelf shall be provided with an overall size 555mm x 280mm made of 8mm thick toughened glass with bevelled edges. the glass shall be supported on vacuum caps situated over ss 304 grade pipe frame. the under structure shall have ss pipe frame having size 67mm x 13.5mm. there shall be ppcp shoe provided to avoid scratches on the floor. , supply of glass centre table specifications: supplying centre table with an overall size 1200mm x 600mm x 450mm. the top shall be made up of 12mm thick toughened glass. the profile shall be in rectangle shape with bevelled edges. the bottom storage shelf shall be provided with an overall size 1155mm x 280mm made of 8mm thick toughened glass with bevelled edges. the glass shall be supported on vacuum caps situated over ss 304 grade pipe frame. the under structure shall have ss pipe frame having size 67mm x 13.5mm. there shall be ppcp shoe provided to avoid scratches on the floor. , supply of office tablespecifications: supplying & placing executive table with credenza unit and pedestal unit in completely knock down conditions with an overall size 1800 1900mm x 750mm x 750mm that is to be assembled at site. the construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. the worktop shall have the size 1800 1900mm x 800mm made up of 50mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top shall be enclosed with wire manager cap for electric provision. a pullout keyboard trey shall be provided of 18mm thick pre laminated particle board having size 550mm x 300mm. the trey shall be operated on sliding channel. the table top shall be supported on particle board base gable end. the end wall of the table on the side shall be topped by gable end. it should be made up of 25mm thick pre laminated particle board and profile shall be in linear shape with appropriate pvc edge banding. the table shall be clad with 18mm thick modesty panel which provide structural support for the table. it should be 18mm thick pre laminated particle board in linear shape with appropriate pvc edge banding connected with both end. there shall be buffers provided at the base to avoid scratches on the floor. the table shall have credenza unit for storage purpose with an overall size 900mm x 450mm x 650mm. it should be made up of pre laminated particle board of grade ii of is 12823 with base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. it shall have 2 box drawers, 1 filing drawer and 1 shutter. it should be operated with the assistance of ss handle, concealed crank hinge and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. it shall be mounted on injection moulded nylon castor. a mobile pedestal shall be provided with an overall size 400mm x 450mm x 650mm. the pedestal shall be made up of pre laminated particle board of grade ii of is 12823. pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. the pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. the pedestal shall be mounted over injection moulded nylon castor. all the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. fitted on lhs, 5 lever lock on 1 no. of drawer and also on 1 no. on swing door.body size: 560 ( d ) x 275 ( h ) x 320 ( w ) drawer, provision of key board, and cpu trolley in side unit, inner shade approved by the department.paint colour: siemens gray, ta grey, silver as or any shade approved by the department. finish & painting epoxy powder coated and baked in oven at a temperature of 200 degree after pre treatment of metal parts for degreasing, de rusting, phosphating and passivation for a compete scratch resistant surface and superb finish. , supply of revolving executive medium backchairspecifications: supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam ( 40+40 ) mm thick having density ( 40 & 32 ) kg / m³ in seat and ( 30+30 ) mm thick having density ( 32, 32 ) kg / m³ in back. the same shall be upholstered with fabric. the backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with polypropylene arm with cushion base leatherette covering top. for seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas lift to suit them using the lever under the seat. the pedestal should have five legged ms crca powder coated with 50 60μ dft thick having pitch circle dia. 660mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98, 000 cycles with 250lbs load. the seat size shall be 500±10mm ( d ) x 520±10mm ( w ) and back size shall be 520±10mm ( w ) x 700±10mm ( h ) from seat. overall height shall be = 1160±10mm, overall depth = 680±10mm & overall width = 660±10mm. , supply of two seater sofa specifications: supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the structure shall be upholstered with fabric dual tone. the under structure shall consist of ss 304 grade legs having cross section area 40mm x 20mm x 1.6mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10mm ( d ) x 550±10mm ( w ) , seat height = 450±10mm, overall width = 1120±10mm, overall depth = 900±10mm & overall height = 820±10mm. , supply of office table supply of office table size main table : 1500mm ( l ) x 800mm ( d ) x 750mm ( h ) with side unit as computer table of size 900 x 600 x 700mmthe table shall carry the following specification: table top 1500 ( l ) x 900 ( w ) x 25mm thick pre laminated hdf board post formed in front and rear & sides affixed with 2mm pvc lipping with hot melt glue.table frame: made from 30mm square crca pipe.rear cladding: 22g crc sheet.3 drawer unit on one side: fitted on rhs with 5 lever lock 1 no. on the top drawer.size: 560 ( d ) x 455 ( h ) x 355 ( w ) , no. of drawers = three ( body ) , lockable with 5 lever single lock drawer inner size: 420 ( d ) x 125 ( h ) x 292 ( w ) movement over frictionless roller slide channels.single drawer with swing door below: fitted on lhs, 5 lever lock on 1 n. of drawer and also on 1 no. on swing door and provision of key board and cpu trolley body size: 560 ( d ) x 275 ( h ) x 320 ( w ) drawer inner, shade approved by the department. paint colour: siemens gray, ta grey silver as or any shade approved by the department. finish & painting epoxy powder coated and baked in oven at a temperature of 200 degree after pre treatment of metal parts for degrading, de rusting, phosphating and passivation for a compete scratch resistant surface and superb finish. , supply of wooden folding partition ( jafri ) of size 1800 x 450 x 25mm with folding partition 3 & 4 fold made of teak wood of colour as per requirement as required by engineer in charge as per sketch....

Chaudhary Devi Lal University - Haryana

29909171 supply of furniture for law department and other various departments at cdlu, sirsa. supply of furniture for law department and other various departments at cdlu, sirsa. , supply of three seater dual deskdual desk of overall size 1525mm x 990mm made out of ms pipe frame 40mm x 25mm x 1.6mm thick as per sketch shall accommodate 3 persons at a time. the seat and back of the desk shall be made of 25mm thick pre laminated post formed hdf board of size 1525mm x 380mm and 1525mm x 300mm respectively, duly covered side edges with hot pressed 2mm thick pvc lipping. the seat and back shall be fixed over ms frame with studs inserted into the board. the writing platform of the bench shall be 1525mm long and 380mm wide made of 25mm thick pre laminated post formed hdf board with 2mm thick hot pressed pvc lipping, fixed over frame of ms pipe with studs inserted into the board. the number of bolts shall be provided as per requirement to fix the board accurately. the all steel components shall be pre treated in 4 steps anticorrosion treatment (degreasing, pickling, phosphating and passivation) before being powder coated and baked in oven so as to achieve 40 45 micron thickness of powder. , supply of podium for lecture hall the lecture dais to be made out of 19 x 19 sq. mm crca pipe 1.2mm thick having a 3 step pedestal at base to impart elegance& rigidity to the dais. the frame to be cladded with 18 mm thick hdf pre laminated board. the height of the podium facing the speaker is 1090mm for a total front height of 1200mm. the standing surface on top having a working area of 550mm x 430mm to be provided for addressing the audience; the 550mm front edge of this board is post formed board. one shelf is provided below the top post formed surface for any accompaniment for use of the speaker/lecture. a footrest is provided at 175mm above the base for the comfort of the user. all metal components are powder coated and oven baked after proper pre treatment as per sketch. , supply of white writing board supplying wall mounting white writing board having size 1200 x 3600mm, writing top surface shall be made of steel sheet of thickness 0.3 to 0.4mm and shall have vitreous enameled coating of 0.11mm minimum thickness on top and 0.03mm minimum on the back pasted over 6 to 9mm thick mdf board with electro galvanized backing sheet. the frame shall be made of anodized extruded aluminum alloys hollow section designation 63400 as per is1285 2002 (re affirmed) of size 20mm x 16mm x 1.2mm along with perfect hanging system on the wall. the top of writing board shall be free from waviness and shall show no scratches when hb two three h pencils are used for writing. the surface shall show excellent erased ability when the specified writing medium is used. it should be possible to fully erase the marking of permanent markers pens using methanol of brand promark or equitant as per sketch. , supply of office table bigexecutive table (a type) specifications: supplying modular table in completely knock down conditions with an overall size 2600mm x 2100mm x 750mm that is to be assembled at site. the worktop shall be made up of 36mm thick (top) and 9mm thick (base top) pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the base of the top shall be covered with the assistance of 9mm thick extruded aluminium frame on the edges. flapper box shall be enclosed at table top. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degrees celsius. the table top shall be supported on particle board based gable end. the end wall of the table on the side shall be topped by gable end. it should be made up of 18mm thick pre laminated particle board and profile shall be in linear shape with appropriate pvc edge banding. the gable end leg shall be provided with 70mm width made up of extruded aluminium channel having aesthetically appealing and corrosion resistance property. the table shall be clad with 18mm thick modesty panel which provide structural support for the table. it should be 18 mm thick pre laminated particle board in linear shape with appropriate pvc edge banding connected with both end. there shall be buffers provided at the base to avoid scratches on the floor. the table shall have side unit for storage purpose with an overall size 1200mm x 550mm x 760mm. the side unit shall be made up of pre laminated particle board of grade ii of is 12823 with top and side 36mm thick, drawer base 9mm and other parts 18mm thick like shutter, back, facia, panel etc. it shall have 2 drawer and 2 shutter. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. a fixed pedestal shall be provided with an overall size 400mm x 450mm x 675mm. the pedestal shall be made up of pre laminated particle board of grade ii of is 12823. the drawer base shall be 9mm thick and other parts like side, back, facia shall be 18mm thick. it shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. the drawer shall be operated with ss handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. to protect the wall from kicks, abrasion and serve as a decorative molding, skirting shall be provided at bottom. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. , supply of high back revolving chair executive chair (a type)specifications: supplying ergonomically designed, comfortable & aesthetically appealing high back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam (25+19)mm thick having density (40+40)kg/m³ with beage leatherette tapestry 0.8mm thick and 535 gsm and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience moulded polyurethane foam 40mm thick having density 40 kg/m³ with beige leatherette tapestry 0.8mm thick and 535 gsm with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. back shall be movable type with the assistance of gas lift provided under the seat and lever in the arm. the armrest shall be used cushion arm with leatherette tapestry and ss shiny chrome finish completely joint with seat and back. the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with gas lift to suit them using the lever under the seat. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 700mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movement. the seat size shall be 480±10mm (d) x 520±10mm (w) and back size shall be 520±10mm (w) x 710±10mm (ht) from seat. overall height shall be = 1190±10mm, overall depth = 750±10mm & overall width = 750±10mm. , supply of visitor chairvisitor chair (a) specifications: supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40) mm thick having density (40, 32)kg/m³ in seat and (30+30)mm thick having density (32, 32)kg/m³ in back. the same shall be upholstered with leatherette tapestry 1mm thick and 571 gsm. the backrest shall be made by keeping the natural curvature of the spine for back support. the chair shall be supplied with polypropylene arm with cushion base fabric covering top. the frame structure shall be cantilever support type made of crca powder coated 50 60μ thick round pipe of dia. 28.5mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 500±10mm (d) x 520±10mm (w) and back size shall be 520±10mm (w) x 625±10mm (h) from seat. overall height shall be = 1040±10mm, overall depth = 680±10mm& overall width = 660±10mm. , supply of ss stackable chairsupply of stackable chair with s.s legs, polypropylene seat and back with arms of size 600 w x 555 d x 765 h mm as per novella 10 of nealkamal or equivalent brand. , supply of office steel big almirah big almirahspecifications: supplying steel almirah in perfectly upright and straight position. the overall size of the almirah shall be 915mm (w) x 485mm (d) x 1980mm (h) including legs. it should be supplied with 4 nos. shelves i.e. 5 loading compartments. door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength crca sheet of grade ‘d’ confirming to is: 513. stiffeners shall be provided in shelf & door. the steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40kg maximum. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50 60 micron. , supply of file racksupply of 5 shelves, closed type steel file racks of size 1800x910x375mm, 100% powder coated side & shelves made up of 0.8mm crca as per model no. dks 14c of dlite kom, godrej, geeken, featherite, nilkamal or equivalent. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50 60 micron as per sketch. , supply of conference chair specifications: supplying a mid back chair with ergonomic design, comfortable & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40) mm thick having density (40 & 32) kg/m³ in seat and (30+30) mm thick having density (32, 32) kg/m³ in back. the same shall be upholstered with fabric the backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with polypropylene arm with cushion base leatherette covering top. for seating durability, the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas lift to suit them using the lever under the seat. the pedestal should have five legged ms crca powder coated with 50 60μ dft thick having pitch circle dia. 660mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98,000 cycles with 250lbs load. the seat size shall be 500±10mm (d) x 520±10mm (w) and back size shall be 520±10mm (w) x 700±10mm (h) from seat. overall height shall be = 1160±10mm, overall depth = 680±10mm & overall width = 660±10mm. , supply of three seater sofaspecifications: supplying three seater sofa that shall be constructed from natural hard wood and marine grade as per is: 710 plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg/m³ in seat and 32kg/m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg/m³. the structure shall be upholstered with fabric dual tone. the under structure shall consist of ss 304 grade legs having cross section area 40mm x 20mm x 1.6mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10mm (d) x 1650±10mm (w), seat height = 450±10mm, overall width = 2320±10mm, overall depth = 900±10mm & overall height = 820±10mm. , supply of glass centre table specifications: supplying centre table with an overall size 1200mm x 600mm x 450mm. the top shall be made up of 12mm thick toughened glass. the profile shall be in rectangle shape with bevelled edges. the bottom storage shelf shall be provided with an overall size 1155mm x 280mm made of 8mm thick toughened glass with bevelled edges. the glass shall be supported on vacuum caps situated over ss 304 grade pipe frame. the under structure shall have ss pipe frame having size 67mm x 13.5mm. there shall be ppcp shoe provided to avoid scratches on the floor. , supply of revolving executive medium backchair specifications: supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40) mm thick having density (40 & 32)kg/m³ in seat and (30+30)mm thick having density (32, 32)kg/m³ in back. the same shall be upholstered with fabric. the backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with polypropylene arm with cushion base leatherette covering top. for seating durability, the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas lift to suit them using the lever under the seat. the pedestal should have five legged ms crca powder coated with 50 60μ dft thick having pitch circle dia. 660mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98,000 cycles with 250lbs load. the seat size shall be 500±10mm (d) x 520±10mm (w) and back size shall be 520±10mm (w) x 700±10mm (h) from seat. overall height shall be = 1160±10mm, overall depth = 680±10mm & overall width = 660±10mm. , supply of two seater sofa specifications: supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg/m³ in seat and 32kg/m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg/m³. the structure shall be upholstered with fabric dual tone. the under structure shall consist of ss 304 grade legs having cross section area 40mm x 20mm x 1.6mm thick. there shall be shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 550±10mm (d) x 550±10mm (w), seat height = 450±10mm, overall width = 1120±10mm, overall depth = 900±10mm & overall height = 820±10mm. , supply of office table supply of office table size main table : 1500mm (l) x 900mm (d) x 750mm (h) with side unit as computer table of size 3 x 1.5 x 2.4the table shall carry the following specification:table top 5(l) x 3(w) x 25mm thick laminated hdf board post formed in front and rear & sides affixed with pvc lipping with hot melt glue.table frame: made from 30mm square crca pipe.rear cladding: 22g crc sheet.3 drawer unit on one side: fitted on rhs with 5 lever lock 1 no. on the top drawer.size: 560 (d) x 455 (h) x 355 (w), no. of drawers = three (body), lockable with 5 lever single lock drawer inner size: 420 (d) x 125 (h) x 292 (w) movement over frictionless roller slide channels.single drawer with swing door below: fitted on lhs, 5 lever lock on 1 n. of drawer and also on 1 no. on swing door and provision of key board and cpu trolley body size: 560 (d) x 275 (h) x 320 (w) drawer inner, shade approved by the department. paint colour: siemens grey, ta grey silver as or any shade approved by the department.finish & painting epoxy powder coated and baked in oven at a temperature of 200 degree after pre treatment of metal parts for degrading, de rusting, phosphating and passivation for a compete scratch resistant surface and superb finish. , computer tablespecifications: supplying computer desk with an overall size 1500mm(w) x 750mm(d) x 750mm(h). it should have work top made up of 25mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top board shall be supported on fixed pedestal at one end and fixed cpu unit at another end. the desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. the modesty panel shall have the size 690mm x 600mm with 18mm thick pre laminated particle board connected with both end. 18mm thick pre laminated board base keyboard tray shall be provided with an overall size 684mm x 350mm. the keyboard trey shall be operated by sliding channel to enable smooth operation. a fixed pedestal shall be provided with the size 400mm x 620mm x 725mm at one end with 3 drawer operated on roller channel and 1 filing drawer operated on ball bearing channel. all drawer shall be operated with ss handle with multi purpose (mp) locking mechanism. other side of table open type storage shall be provided with the size 400mm x 600mm x 725mm having one adjustable shelf to accumulate cpu. complete under structure made in 18mm thick pre laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. to protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007. , supply of office steel almirahs small almirahsmall almirah specifications: supplying steel almirah in perfectly upright and straight position. the overall size of the almirah shall be 760mm (w) x 430mm (d) x 1270mm (h) including legs. it should be supplied with 3 nos. shelves i.e. 4 loading compartments. door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength crca sheet of grade ‘d’ confirming to is: 513. stiffeners shall be provided in shelf & door. the steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40kg maximum. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50 60 micron. , supply of pin up notice board with doorsupply of 1200mm x 900mm pin up notice board with door notice board with rear panel of laminated sheet, over all pin ability depth of board 9mm, core material thickness 9mm, orientation as portrait/landscape front glass lockable cover, frame material of board aluminium, front layer of soft board with fabric and corner protection. , supply ofdual deskdual desk of overall size 1140mm x 990mm made out of ms pipe frame 40mm x 25mm x 1.6mm thick as per sketch shall accommodate 3 persons at a time. the seat and back of the desk shall be made of 25mm thick pre laminated post formed hdf board of size 1140mm x 330mm and 1140mm x 300mm respectively, duly covered side edges with hot pressed 2mm thick pvc lipping. the seat and back shall be fixed over ms frame with studs inserted into the board. the writing platform of the bench shall be 1140mm long and 380mm wide made of 25mm thick pre laminated post formed hdf board with 2mm thick hot pressed pvc lipping, fixed over frame of ms pipe with studs inserted into the board. the number of bolts shall be provided as per requirement to fix the board accurately. the all steel components shall be pre treated in 4 steps anticorrosion treatment (degreasing, pickling, phosphating and passivation) before being powder coated and baked in oven so as to achieve 40 45 micron thickness of powder. , supply ofoffice chair of following specification: office chair (a) specifications: supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. the seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40)mm thick having density (40, 32)kg/m³ in seat and (30+30)mm thick having density (32, 32)kg/m³ in back. the same shall be upholstered with leatherette tapestry 1mm thick and 571 gsm. the backrest shall be made by keeping the natural curvature of the spine for back support. the chair shall be supplied with polypropylene arm with cushion base fabric covering top. the frame structure shall be cantilever support type made of crca powder coated 50 60μ thick round pipe of dia. 28.5mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 500±10mm (d) x 520±10mm (w) and back size shall be 520±10mm (w) x 625±10mm (h) from seat. overall height shall be = 1040±10mm, overall depth = 680±10mm& overall width = 660±10mm. , supply of office tableclerk tablespecifications: supplying and placing a modular table with an overall size 1200mm x 600mm x 750mm. the top of the table shall be made of 18mm thick pre laminated particle board of grade ii of is 12823 with approved laminate and finish as per approved shade. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel with the assistance of edge banding machine at 200 degree celsius. the top shall be supported on crca rectangle pipe frame having cross section area 40mm x 20mm with 1.6mm thick. the table understructure shall be supplied with crca rectangle pipe having cross section area 40mm x 20mm. the gable end shall be given at one side made up of 0.8mm thick perforated high yield strength crca sheet of grade d confirming to is:513. fixed pedestal unit with powder coated metallic body shall be supplied with 3 nos. of drawer i.e. 2 box+1 filing at one side. all the drawer shall be synchronized locked with central locking mechanism by one single key. the drawer shall be operated with abs plastic recessed handle. the manufacturer shall have basic quality and safety certifications like iso 9001:2015, iso 14001: 2015, iso 18001:2007. , supply of bookcase with scissor mechanism of following specification: supplying metal book case with an overall size 915 mm (w) x 320 mm (d) x 1750mm (h). the book case shall be supplied with 4 nos. of individual compartments. top, back & side panels shall be made of 0.8mm and rest 1mm high yield strength crca sheet of grade ‘d’ confirming to is: 513. each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. each door shall have plastic side end caps as handle which is easy to grip. each compartment has a storage shelf having uniformly distributed load capacity of each shelf is 40 kg maximum. the finish is epoxy polyester powder coated to the thickness of 40 60μ. adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. , supply of newspaper stand without storage cabinet made of crca heaving frame size: 30 x 39 and 2 numbers of sloping reading platforms 24 x 40 size. each reading platform shall be made from 18mm thick pre laminated mdf board and it shall also cover full spread of newspaper. there is a provision for keeping the current newspapers on an looking horizontal platform as per sketch. temporary storage platform having size 22 x 37 size, made from 18mm thick pre laminated mdf board. in the middle of reading platforms is provided a steel strip hinged at top and fixed with the main steel frame and thus avoiding the possibility of damage to the reading platform in any way whatsoever. at the lower edge of newspaper reading platform is provided a stay for keeping newspaper spread in position top frame: consisting sloping 4 nos square pipes and one horizontal pipes on top and two horizontal pipes on both side of the platform shall be of 25x25x1.2mm crca square pipe to be supported on 25 x 50 x 1.2 mm crca square pipes. middle frame consisting 4 nos. vertical supports made from 25 x 25 x 1.2mm crca square pipes and base frame is made from 2 nos 25 x 50 x 1.2mm crca square pipe. also at the bottom are provided level adjustors for providing stability to the newspaper reading stand and to overcome floor irregularities. all steel components of the cabinet shall be pre treated in 4 step anti corrosion treatment (degreasing, pickling, phosphating passivation) before being powder coated and baked in oven so as to achieve 40 45 micron thickness of the powder....

Employees State Insurance Corporation - Haryana

28577321 e tender notice for supply of orthopaedic implants and physiotherapy items e tender notice for supply of orthopaedic implants and physiotherapy items , ortho implant , dynamic compression plate set 2.7 mm , ss , dynamic compression plates 2.7mm, (2 12) holes ss , cortical screws 2.7mm ,l 6mm 20mm ss , dynamic compression plate set 3.5mm ,ss , small dynamic compression plate 3.5mm for fore arm (4 10 holes) ss , cortical screws 3.5mm , l 10mm 30mm ss , narrow dynamic compression plate set, ss , narrow dynamic compression plate 4.5mm ,(5 14 holes) ss , 4.5mm cortical screws l 10mm 40mm ss , broad dynamic compression plate set 4.5mm, ss , broad dynamic compression plate 4.5mm (6 18 holes) ss , 4.5mm cortical screws l 20mm 60mm ss , lc dcp set 3.5 mm, ss , lc dcp 3.5mm, (4 12) holes ,ss , corticalscrews 3.5mm ,l 10mm 30mm ss , narrow lc dcp set 4.5 mm ,ss , narrow lc dcp4.5mm,( 4 16 holes), ss , cortical screws 4.5mm , l 10mm 40mm ss , broad lc dcp set 4.5 mm ,ss , broad lc dcp 4.5mm ,(6 18) holes, ss , cortical screwsl 20mm 60mm ss , locking compression plate set 3.5 mm ,ss , locking compression plate 3.5mm, (4 12) holes,ss , locking head self tapping screw 3.5 mm ,l 10mm 30mm ,ss , self tapping cortical screw 3.5 mm,l 10mm 30mm ,ss , drill bit for locking screws 3.5mm extra long,ss , locking sleeve for locking plate 3.5mm ,ss , locking compression plate set 3.5 mm ,titanium , locking compression plate 3.5mm, (4 12) holes, titanium , locking head self tapping screw 3.5 mm ,l 10mm 30mm ,titanium , self tapping cortical screw 3.5 mm ,l10mm 30mm ,titanium , narrow locking compression plate set 4.5 mm ,ss , locking compression plate 4.5mm, narrow, (4 16) holes ,ss , lockingself tapping screw 5 mm,l 10mm 40mm ,ss , self tapping cortical screw4.5 mm,l 10mm 40mm ,ss , drill bit for locking screws 5mm extra long,ss , locking sleeve for locking plate 5mm ,ss , broad locking compression plate set 4.5 mm,ss , locking compression plate 4.5mm, broad, (6 18) holes ,ss , 5 mm locking head self tapping screw , l 20 60 mm ,ss , 4.5 mm self tapping cortical screw ,l 20 60 mm,ss , broad curved femoral locking compression plate 4.5/5 mm with corresponding screw,ss , locking compression plate 4.5/5, broad curved, 12 26 holes left & right for femur,ss , 5 mm locking head self tapping screw , l 20 60 mm ,ss , 4.5 mm self tapping cortical screw , l 20 60 mm ,ss , t plate , right angled set for distal radius,ss , small t plate, right angled for distal radius 3.5mm, (3 6) holes, ss , cortical screw 3.5 mm , l 8 40 mm,ss , t plate oblique angled set for distal radius, ss , small t plate, oblique angled plate for distal radius, 3.5mm ,(3 5)holes, ss , cortical screw 3.5 mm ,l 8 40 mm,ss , lcp distal radius plate 2.4mm forvolar fracture, titanium to be supplied with instruments on loan for case to case basis , lcp distal radius plate,left and right,shaft 3 to 4 holes,head 5 holes,for intraarticular volar fracture titanium , lcp distal radius plate 2.4mm ,extraarticular,left and right ,shaft 3and 5 holes,head 4 and 5 holes,titanium , lcp distal radius plate 2.4mm,extralong, shaft 8 to 12 hole,head 4 holes, titanium , cortexcrews dia 2.4mm ,self tapping l 14 40mm ,titanium , locking screw 2.4mm l 6 30mm , cortical screws 2.7mm l 14 40mm titanium , locking compression plate(lcp) t plate 3.5mm set for distal radius,titanium , locking compression plate t plate 3.5mm, right angled, 3 6holes for distal radius,titanium , locking compression plate t plate 3.5mm, oblique angled,right/left, 3 6holes for distal radius,titanium , cortical screw self tapping 3.5 mm ,l 6 30 mm,titanium , locking head screw 3.5 mm ,l 6 30 mm,titanium , extralong 3.5mm distal end radius plate 3.5mm ss , extralong 3.5mm distal end radius plate 3.5mm ss shaft 8 to 12 hole , 3.5mm self tapping cortical screwsl 6 30mm , radial head & neck fixation plate set , to be supplied with instrumentation on loan for case to case basis , proximal radiusplate 2.4mm,titanium , proximal radius rim plate 2.4mm,2 4 holes titanium , proximal radius neck plate 2.4mm,2 4 holes,titanium , cortical screws 2mm self tapping l 6 30mm,titanium , cortical screws 2.4mm self tapping l 6 30mm,titanium , locking screws 2.7mm self tapping l 10 30mm,titanium , locking screws 2.4mm self tapping l 6 30mm,titanium , mini plate set ,titanium , strut plate 1.5mm ,titanium , t plates1.5mm ,titanium , y plate 1.5 mm,titanium , cortical screw 1.5 mm ,titanium , locking t plate set 2mm ,titanium , locking t plate 2mm,titanium , locking straightplate 2mm ,titanium , locking condylarplate2mm ,titanium , locking cortical screw 2mm self tapping,titanium , locking t plate set 2.4 mm ,titanium , locking t plate 2.4 mm,titanium , locking straightplate 2.4mm ,titanium , cortical screw2.4mm self tapping ,titanium , locking head screw2.4 mm self tapping,titanium , locking calcaneal plate set 3.5mm ,ss , locking calcaneal plate 3.5mm, l 60mm 70mm ,ss , cortical screw3.5 mm, l 10mm 30mm ,ss , locking calcaneum plate set 3.5mm,titanium , locking calcaneal plate 3.5mm,titanium , locking screws 2.4 mm,l 10 30 mm,titanium , locking screws 2.7 mm,l 10 30 mm,titanium , locking screws 3.5 mm,l 10 40 mm,titanium , locking x plate set for hallex valgus osteotomy ,titanium , locking x plate for hallex valgus osteotomy,titanium , locking screw 2.7 mm(head 2.4 mm)self tapping,10 30 mm,titanium , 1/3rd tubularplate set3.5 mm ,ss , 1/3rd tubularplate 3.5 mm, (2 12) holes,ss , cortical screw 3.5 mm ,l 10 30 mm,ss , 1/3rd tubular locking plate set 3.5 mm ,ss , 1/3rd tubular locking plate 3.5 mm, (2 12) holes,ss , locking head screw 3.5 mm , l 6 30 mm,ss , semi tubular plate set 4.5mm ,ss , semi tubular plates 4.5mm, 2holes to 12 holes, ss , cortical screw 4.5mm, l 20 60 mm , ss , t buttress plate 4.5mm (4 8) holes,ss , l buttress plates 4.5mm, 3 8 holes, right/left leg , ss , 4.5mm self tapping cortical screw l 20 60mm , t buttressplate 4.5mm, 3 12 holes, titanium , l buttress plate 4.5mm, 3 8 holes, right/left leg, titanium , 4.5mm self tapping cortical screw l 20 60mm titanium , y reconstruction plates3.5mm ,ss , reconstruction plate 3.5 mm (5 22 holes),ss , reconstruction plate 4.5 mm (5 22 holes),ss , straight pelvic reconstruction plate 3.5mm(5 22) holes, ss , lcp reconstruction plate set ,titanium , lcp reconstruction plate 3.5mm, straight w/combined hole, 5 14holes, titanium , cortical screw 3.5 mm self tapping,l 20 60 mm,titanium , locking head screw 3.5 mm self tapping , l 20 60 mm,titanium , lcp reconstruction plate set ,ss , lcp reconstruction plate 3.5mm, straight w/combined hole, 5 14holes, ss , cortical screw 3.5 mm self tapping,l 20 60 mm,ss , locking head screw 3.5 mm self tapping , l 20 60 mm,ss , low profile reconstruction pelvic plate system ,ss , reconstruction plate 3.5 mm low profile, 6 16 holes, curved, ss , reconstruction plate 3.5 mm low profile, 3 20 holes,straight ,ss , reconstruction plate 3.5 mm low profile, 10 16 holes, j shaped,ss , pelvic cortex screw 3.5 mm self tapping ,l 30 110,ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75mm , l 90 150,ss , spring plate set,ss , spring plate, 1 3 holes, length 195 mm, 315 mm, 435 mm,ss , cortical screw 3.5 mm for spring plate,l 20 40mm ss , proximal humeral locking plate set ,ss , proximal humeral locking plate 3.5mm, (4 10)holes, left &right ,ss , locking screw cannulated 3.5 mm, l 20 60 mm,ss , non locking screw cannulated 3.5 mm, l 20 60 mm,ss , locking screw 3.5mm,l 12 60 mm,ss , cortical screw 3.5mm,l 12 60 mm,ss , proximal humeral locking plate set ,titanium , proximal humeral locking plate 3.5mm,(3 12)holes,left &right , titanium , cannulated locking screw 3.5mm,l 12 60 mm,titanium , cortical screw 3.5mm, l 12 60 mm,titanium , distal humerus lockingplate set ,ss , distal humerus lockingplate 3.5 mm medial ,left & right, 5 8 holes,ss , distal humerus lockingplate lateral ,left & right, 5 8 holes,ss , cortical screw 2.7 mm, l 10 60 mm,ss , cortical screw 2.7 mm locking head , l 10 60 mm,ss , cortical screws 3.5mm with head 2.7 mm, l 20 40 mm, ss , cortical screws 3.5mm with lockinghead 2.7 mm, l 20 40 mm, ss , lcp distal humerus plate setto be supplied with instruments on loan for case to case basis along with screw box ,titanium , lcp distal humerus plate 2.7/3.5mm dorsolateral with and without support for lateral condyle right or left,(3 14)holes, titanium , lcp distal humerus plate 2.7/3.5mm medial, right or left,(3 14)holes , titanium , locking screw 2.7 mm (head 2.4) self tapping , l 14 60 mm,,titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical screw 3.5 mm self tapping , l 10 60 mm, titanium , locking distal humerus extra articular plate set ,ss , locking distal humerus extra articular plate, 6 10 combi holes,ss , locking head screw 3.5 mm, l 10 60 mm, ss , corticalscrew 3.5 mm self tapping, l 10 60 mm, ss , lcp distal humerus extra articular plate set right & left,titanium , lcp distal humerus extra articular plate right & left , 6 10 combi holes,titanium , locking head screw 3.5 mm self tapping , l 10 60 mm, titanium , cortical screw 3.5 mm self tapping , l 10 60 mm, titanium , distal medial femoral locking plate set ,titanium , distal medial femoral locking plate , 4.5/5 mm left/right, (6 18)holes,titanium , locking head screw 5 mm self tapping, l 20 80 mm, titanium , cancellous screw 5 mm self tapping , l 20 70 mm, titanium , cancellous screw 4.5 mm self tapping , l 20 70 mm, titanium , cortical screws 4.5mm self tapping ,l 20 70mm,titanium , distal lateral femoral locking plate set ,ss , distal lateral femoral locking plate 4.5/5 mm, left/right ,(6 18) holes , ss to be supplied with instrumnets and screw box on loan for case to case basis , locking head screw 5 mm self tapping , l 20 80 mm, ss , cortical screw 4.5 mm self tapping, l 20 70 mm, ss , locking cancellous screw 4.5mm self tapping , l 20 70 mm, ss , lcp distal femur lateral plate set ,titanium to be supplied with instrumnets and screw box on loan for case to case basis , locking compression plate for lateral distal femur 4.5mm, (5 13) holes, right and left,titanium , locking head screw 5 mm self tapping , l 20 80 mm, titanium , cortical screw 4.5 mm self tapping , l 20 70 mm, titanium , proximal lateral tibial locking plate set ,ss , proximal lateral tibial locking plate4.5/5 mm,left/right (4 14) holes, ss , locking screw 5mm, l 20 80 mm,ss , cancellous screw , l 20 70 mm,ss , cortical screw 4.5 mm self tapping,l 20 70 mm,ss , proximal lateral tibial locking plate set ,titanium , proximal lateral tibial locking plate 4.5/5 mm,left/right (4 14) holes , titanium , locking head screw 5 mm self tapping, l 20 80 mm,titanium , cancellousscrew 6.5 mm, l 20 70 mm,titanium , cortical screw 4.5 mm self tapping,l 20 70 mm,titanium , lcp proximal tibial plate 3.5mm set (medial & lateral),titanium , lcp medial proximal tibial plate 3.5mm right/left shaft, 4 12 holes, titanium , lcp lateral proximal tibia plate 3.5mm ,4 16mm holes, right/left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical screw 3.5 mm self tapping , l 10 60 mm, titanium , lcp proximal tibial plate 3.5mm set (medial & lateral),ss , lcp medial proximal tibial plate 3.5mm right/left shaft, 4 12 holes, ss , lcp lateral proximal tibia plate 3.5mm ,4 16mm holes, right/left, ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical screw 3.5 mm self tapping , l 10 60 mm, ss , posterior medial tibial plate set ,titanium , posterior medial tibial plate 3.5mm ,4 10 holes, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , corticalscrew 3.5 mm self tapping, l 10 60 mm, titanium , distal medial tibia locking plate set ,ss , distal medial tibia locking plate 3.5 mm ,left & right (5 21 holes),ss , locking head screw 3.5 mm, l 10 60 mm, ss , corticalscrew 3.5 mm self tapping, l 10 60 mm, ss , cancellous locking screw 4 mm,ss. , distal medial tibia locking plate set ,titanium , distal medial tibia locking plate 3.5 mm ,left & right (4 14 holes), titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical screw 3.5 mm self tapping , l 10 60 mm, titanium , cancellous locking screw 4 mm,titanium. , lcp anterolateral distal tibia plate set ,titanium , lcp anterolateral distal tibia plate 3.5mm, right or left,(5 21)holes, titanium , lcp distal medial tibia plate 3.5mm medial,right/left, (4 14) holes , titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical screw 3.5 mm self tapping, l 10 60 mm, titanium , cancellous screws 4mm full threaded, l 20 80mm,titanium , cancellous screws 4mm half threaded, l 20 80mm,titanium , low profile distal tibial medial plate set ,titanium , low profile distal tibial medial plate 3.5mm set , titanium , low profile distal tibial medial plate 3.5mm,6 20 holes,titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , cancellous screws 4mm full threaded, l 20 80mm,titanium , cancellous screws 4mm half threaded, l 20 80mm,titanium , lcp hook plate set 3.5mm ,titanium , lcp hook plate 3.5mm ,3holes,titanium , locking head screw 3.5 mm, l 12 40 mm, titanium , cortical screws 3.5mm, l 12 40 mm, titanium , hook plate set 3.5mm ,ss , hook plate 3.5mm ,3holes,ss , cancellous screw 4 mm, l 12 40 mm, ss , cortical screws 3.5mm, l 12 40 mm, ss , metaphyseal plate 3.5mm set ,titanium , metaphyseal plate 3.5mm ,titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical screw 3.5 mm self tapping, l 10 60 mm, titanium , metaphyseal plate 4.5/3.5 mm set ,titanium , metaphyseal plate 4.5/3.5 mm for metaphyseal fractures.titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical screw 3.5 mm self tapping, l 10 60 mm, titanium , locking head screw 5 mm self tapping, l 20 80 mm, titanium , cortical screw 4.5 mm self tapping, l 20 70 mm, titanium , angled blade plates 130° blade for femoral angular osteotomy, l (50mm 95mm) 4 9 holes, ss , double angled blade plates 130° blade for femoral angular osteotomy, l (50mm 95mm) 4 9 holes, ss , 90° osteotomy plate 4 holes, ss , 95°condylar blade plate ,5 18 holes,ss , osteotomy plate medial high tibia, 3 and 4 holes, right and left, titanium , medial tibialproximal osteotomy plate set, 4 holes, right/left,titanium , medial tibialproximal osteotomy plate, 4 holes, right/left, titanium , locking head screws 5mm,l 30 80mm titanium , cortical screws 4.5mm,l 30 60mm titanium , lateral proximaltibial osteotomy plate set,3 holes, right/left, titanium , lateral proximal tibial osteotomy plate ,3 holes, right/left, titanium , locking head screws 5mm,l 30 80mm titanium , cortical screws 4.5mm,l 30 60mm titanium , distal medial lower femoral osteotomy plate set,4 holes right/left, titanium , distal medial lower femoral osteotomy plate ,4 holes right/left titanium , locking head screws 5mm,l 30 90mm titanium , cortical screws 4.5mm,l 30 60mm titanium , distal lateral lower femoral osteotomy plate set,4 holes right/left, titanium , distal lateral lower femoral osteotomy plate, 4 holes right/left, titanium , locking head screws 5mm,l 30 90mm titanium , cortical screws 4.5mm,l 30 60mm titanium , paediatric hip plates for ostetomy around hip stainless steel to be provided with instrumenation and screw box on loan for case to case basis , lcp paediatric hip plate 5.0, 130°, ,length 175 mm , lcp paed hippl 3.5 130° w/19 l , lcp paed hippl 3.5 & 5mm 140° straig , lcp paed condy pl 3.5 90° 3&5 holes , lcp paediatric condylar pl 5.0 90° 3&5 holes , cortscr 4.5mm self tap l 14 60 sst , cortscr 3.5 self tap l 10 60 sst , lockscr 5mm self tap l16 90 sst , lockscr 3.5mm self tap l12 80 sst , figure of eight (8) plate for epiphysiodesis,with two corresponding screws ,ss , figure of eight (8) locking plate for epiphysiodesis with two corresponding screws,titanium , clavicle locking plate set ,ss , clavicle locking plate 3.5 mm, ss , locking head screw 3.5 mm, l 10 40 mm, ss , corticalscrew 3.5 mm self tapping, l 10 40 mm, ss , clavicle locking plate set ,titanium , clavicle locking plate 3.5 mm,titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical screw 3.5 mm self tapping, l 10 40 mm, titanium , clavicle ( superior anterior plate with lateral extention ) , lcp superior anterior clavicle plate 2.7/3.5 w/ lateral extension all sizes titanium , 3.5mm cortex screw, self tapping, l 10mm 20mm titanium , lcp locking screw2.7 mmself tapping, length 6mm 60mm,titanium , 3.5mm locking head screw, self tapping, l 10 80mm titanium , lcp superior anterior clavicle plate 2.7/3.5 w/ lateral extension all sizes stainless steel , 3.5mm cortex screw, self tapping, l 10mm 20mm , lcp locking screw 2.7 mm (head lcp 2.4), self tapping, length 6mm 60mm, , 3.5mm locking head screw, self tapping, l 10 80mm , lc lcp wrist fusion plate set ,titanium , lc lcp wrist fusion plate2.7/3.5, standard bend, titanium , locking head screw 2.7 mm, l 10 40 mm, titanium , cortical screw 2.7 mm self tapping, l 10 40 mm,titanium , locking head screw 3.5 mm self tapping, l 10 40 mm,titanium , cortical screw 3.5 mm self tapping, l 10 40 mm, titanium , lcp olecranon plate set ,ss , lcp olecranon plate 3.5mm ,left/right,holes(2 12), ss , locking head screw 3.5 mm self tapping , l 10 40 mm,ss , cortical screw 3.5 mm self tapping, l 10 40 mm, ss , lcp olecranon plate set ,titanium , lcp olecranon plate 3.5mm,left/right,holes(2 12) ,titanium , locking head screw 3.5 mm self tapping , l 10 40 mm,titanium , cortical screw 3.5 mm self tapping, l 10 40 mm, titanium , lcp olecranon hook plate set ,titanium , lcp olecranon hook plate 3.5 mm,2 10 holes, titanium , locking head screw 3.5 mm self tapping, l 10 40 mm,titanium , corticalscrew 3.5 mm self tapping, l 10 40 mm, titanium , lcp olecranon hook plate set ,ss , lcp olecranon hook plate 3.5 mm,2 10 holes, ss , locking head screw 3.5 mm self tapping, l 10 40 mm,ss , corticalscrew 3.5 mm self tapping, l 10 40 mm, ss , dhs plate set ,ss , dhs plate 130°,135°,150° ,barrel length 38mm (4 10)holes,ss , dhs plate 135°, barrel length 25mm (4 6)holes, ss , dhs/dcslag screw 12.5/8.0mm, l 50mm 115mm, ss , dcs plate 95°, 4 10holes,ss , dhs/dcs compression screw 4.0mm, l 36mm, ss , cortical screw 4.5 mm, l 20 70 mm, ss , dhs guide wire , dhs trochanter stabilizing plate , ss , lcp dhs plate set ,titanium , lcp dhs plate 130°,135°,150° ,barrel length 38mm, 2 6 holes, titanium , lcp dhs plate 135°, barrel length 25mm (4 6)holes, titanium , lcp dhs/dcsscrew 12.5/8.0mm, l 50mm 115mm, titanium , helical blade for lc dhs ,12.5 dia,l 65 115 mm,titanium , dhs/dcs compression screw 4.0mm, l 36mm,titanium , locking device for lag dhs, 35 mm,titanium , locking cortical screw 5 mm ,l 20 60 mm,titanium , cortical screw 4.5 mm self tapping,l 20 60 mm,titanium , paediatric dhs set ,ss , dhs plate with barrel length,various sizes,ss , dhs screw,various sizes,ss , dhs compression screw ,various sizes,ss , cable plate system for periprosthetic fracture. , cable plates 6 10 hole, for peri prosthetic fractures,ss , cable assembly with cerclage dia. 1.8 mm,ss , cable for plate dia . 1.8 mm,ss , cable needle assembly,dia. 1.3 mm , cortical bone screw 4.5 mm for use with cable plate , hex button 3.5 mm for use with 4.5 & 6.5 mm screw,ss , cable pin (2 in no.) 1.3 mm ,l 35 65 mm. , cable pin crimpar assembly , locking attachment plate set 3.5 mm for peri prosthetic fractures, titanium , locking attachment plate 3.5 mm for peri prosthetic fractures, 4 & 8 hole,titanium , locking head screw3.5 mm self tapping, l 10 60 mm,titanium , cortical screw 3.5 mm self tapping, l 10 60 mm, titanium , connecting screw 5 mm ,l 10 40 mm , trochanteric fixation plate set ,titanium , trochanteric fixation plate with option of multiple screw & screw cerclage wire,various sizes,titanium. , cortical screw 3.5 mm, l 10 50 mm,titanium. , cortical screw 4.5 mm, l 14 60 mm,titanium. , cancellous screw 4 mm short thread,l 20 60 mm,titanium. , cancellous screw 4 mm full thread,l 20 60 mm,titanium. , cerclage cable co cr. , peri prosthetic fracture fixation ,cable cum plating system,ss , trochanteric grip:low profile ,proximal hook for anti rotational stability sharp distal spike,s/m/l,vitallium& ss , trochanteric grip plate:trochentric plate with proximal hooks , all sizes,ss , cable sleeve:1.6mm & 2mm,vitallium& ss , variable angle condylar plates for peri prosthetic fracture stainless steel , variable anglelcp condylar plate 4.5/5.0, stainless steel all sizes , variable angle locking screw stardrive5.0 mm, self tapping, length 14 100 mm, stainless steel , wire mount , cortscr 4.5 self tap l 14 60 sst , variable angle periprosthetic locking screw stardrive 5.0 mm, self tapping, length 8 20mm, stainless steel , variable angle cannulated locking screw 5.0 mm, length 20 100 mm, stainless steel , reconstruction femoral nail set,titanium to provide instruments on loan for case to case basis , reconstruction femoral nail 9.0mm to 12mm dia,right/left, l 340 440mm,titanium , hip screw 6.5mm, l 75 110 mm, titanium , end cap, cannulated , l 0mm 15mm, titanium , locking bolt self tapping, l 26 68mm for reconstruction nail, titanium , washer 12.0/6.5mm, dia.2.5mm thick, titanium , hip screw guide wire , proximal femoral nail set with blade,titanium to provide instrumentsand assorted blade and screw sizeson case to case basis , proximal femoral nail with anti rotation for short stature and osteoporotic bones size: 9 10mm,l 170 420mm right/left, titanium , proximal femoral nail with anti rotation for short stature and osteoporotic bones size:11 12mm ,l 170 240mm,right/left, titanium , helical blade for proximal femoral nail ,l 75 120mm, titanium , locking bolt , self tapping, l 26 68mm forproximal femur nail, titanium , antigradefemoral nail set,titanium , antigradefemoral nailwith one proximal hole should have a locking option from greater trochanter to lesser trochanter.dia 9 11 mm length 340 400mm,titanium , proximal locking screw , titanium , distal lockingscrew , titanium , cannulated interlocking femoral nail set,ss , cannulated interlocking femoral nail ,dia. 9mm 13mm ,l 340 440mm,ss , inter locking bolt,ss , cannulated interlocking femoral nail set,titanium , cannulated interlocking femoral nail 9.0mm 13.0mm dia., l 280mm 480mm, titanium. , locking bolts ,titanium , supra condylar femoral fracture nail set,titanium , supra condylar femoral fracture nail 9.0mm dia.,l 160 340mm,solid,titanium , supracondylar femoral fracture nail 9 12mm dia.,cannulated, l 200 380mm, titanium , distal locking screw , titanium , spiral blade l 60 80mm,titanium , proximal locking screw 6 mm self tapping,titanium , 100f , kuntcher clover leaf i/m nail, 6 14mm dia., l 20 48cm (1cmincrement) , unreamed solid tibial nail set,ss , unreamed solid tibial nail 8 9mm dia.,l 285 380mm, ss , end caps for tibial nails, ss , locking bolt ,ss , cannulated interlocking tibial nail set,titanium , cannulated interlocking tibial nail 8 11 mm dia.,l 300 400mm,titanium , locking bolt , self tapping,titanium , cannulated interlocking tibial nail set,ss , cannulated interlocking tibial nail 8 12mm, l 200 400mm, ss , locking bolt , ss , antibiotic (gentamycin) eluting tibial nail and locking screw set , antibiotic (gentamycin) elutinginterlocking tibial nail, all sizes and length , locking bolt , all sizes and length , unreamed humeral nail set,titanium , unreamed humeral nail , various sizes,titanium , spiral blade for unreamed humeral nail,titanium , locking bolts , self tapping, l 16mm 48mm forhumerus nailing, titanium , proximal humeral naii set,titanium , proximal humeral naiivarious sizes, titanium , spiral blade for phn, titanium , locking bolts , self tapping, titanium , humerus inter locking nail set,ss , humerus inter locking nail , various sizes ,ss , locking bolt,ss , humerus inter locking nail set,titanium , humerus inter locking nail , various sizes ,titanium , locking bolt,titanium , square nail for radius and ulna 1.5mm ,2mm ,2.5 mm dia., l 17 30 cm (1cm increment) , square nail for radius and ulna 3mm,3.5mm dia.,l 17cm 30cm (1cm increment) , elastic nail 2mm,2.5mm,3mm dia. , l 440mm, titanium , elastic nail 3.5 4.0 mm dia. , l 440mm, titanium , ender nail, dia. 6 12mm, various length,ss , fully re sorbable synthetic beta tricalcium phosphate granules,average particle size of 2mm,5cc , fully re sorbable synthetic beta tricalcium phosphate granules,average particle size of 2mm,10cc , fully re sorbable synthetic beta tricalcium phosphate granules,average particle size of 2mm,20cc , fully re sorbable synthetic bone graft substitutes(beta tricalcium phosphate and calcium sulphate,5cc,mouldable putty , fully re sorbable synthetic bone graft substitutes(beta tricalcium phosphate and calcium sulphate,10cc,mouldable putty , synthetic re crystallize hemihydrate calcium sulphate with antibiotic impregnated re sorbable pallets with pallet making kit,5cc , synthetic re crystallize hemihydrate calcium sulphate with antibiotic impregnated re sorbable pallets with with pallet making kit,10cc , injectable bone substitutes 100% nano crystal hydroxy apetite (ha) bone paste ,1ml. , injectable bone substitutes 100% nano crystal hydroxy apetite (ha) bone paste ,2ml. , injectable bone substitutes 100% nano crystal hydroxy apetite (ha) bone paste ,5ml. , injectable bone substitutes hydroxy apetite (ha) and calcium sulphate hemihydrate biphasic bone substitute with pre filled syringe device,5ml , injectable bone substitutes hydroxy apetite (ha) and calcium sulphate hemihydrate biphasic bone substitute with pre filled syringe device,10ml , injectable bone substitutes hydroxy apetite (ha) and calcium sulphate hemihydrate biphasic bone substitute with pre filled syringe device,18ml , injectable bone substitutes hydroxy apetite (ha) with antibiotic (gentamycin) 10ml,with gentamycin vial with injection device and needle , injectable bone substitutes,b tricalcium phosphate and hylonorate solution with needle10g and 12g for injectable bone substitute,10cc , injectable fully re sorbable synthetic bone graft substitutes (beta tricalcium phosphate and calcium sulphate,5cc paste , injectable fully re sorbable synthetic bone graft substitutes (beta tricalcium phosphate and calcium sulphate,10cc,paste , beta tri calcium phosphate granules 1.4 2.8mm/porosity 60% bone substitutes,5g , beta tri calcium phosphate granules 1.4 2.8mm/porosity 60% bone substitutes,10g , re absorbable implant for high tibial osteotomy height 6 10mm , re absorbable implant for high tibial osteotomy height 11 15mm , cerclage wire with eye , dia. 1mm,1.25mm,1.5mm, l 280 600mm,ss , cerclage wire tightener , wire mount for lcp 4.5/5.0 mm,titanium , high tensile stregnth ss wires: 16 ,18 , high tensile strenght ss wires: 20 ,22 ,24 gauge. , giggli wire , giggli wire handle , steinman pins dia. 3mm,3.5mm,4mm,l 150, 175,200, 225mm,ss , steinman pins dia. 4.5mm,5mm,l 150,175,200,225mm ,ss , denham pins dia.3mm,3.5mm,4mm,l 150,175,200,225mm,ss , denham pins dia.4.5mm,5mm,l 150,175,200,225 mm,ss , k wire, dia. 0.6mm,l 70mm,ss , k wire, dia. 0.8mm,l 150mm,ss , k wire with trocar tip,dia.1.4mm,1.6mm,1.8mm,2.0mm,l 150mm,ss , k wire with trocar tip,dia.2.5mm,3.0mm,l 150mm,ss , k wire with trocar tip dia. 1.4mm,1.6 mm,1.8mm,2.0mm,l 280mm,ss , k wire with trocar tip dia. 2.5mm,3.0 mm ,l 280mm,ss , k wire double tip,dia. 1.4mm,1.6mm,1.8mm,2.0mm, l 150 300 mm,ss , k wire double tip, dia. 2.5mm,3.0 mm, l 150 300mm,ss , k wire with threaded tip,dia. 1.25mm,1.6mm,2.5mm l 150mm,ss , graduated guide wire with spade point dia. 1.2mm,1.5mm,1.6mm, 1.8mm,2.0mml 150 to300mm,ss , graduated guide wire with trocar tip dia.1.25mm,2.0mm ,2.5mm l 200 to 230mm,ss , guide wire graduated (threaded) 1.25 mm dia. ,ss , femoral/tibia reaming guide wire beaded , femoral/tibia reaming guide wire non beaded , cancellous screws self tapping fully threaded,3.5 mm dia, l 10 30mm (2mm increment),ss , cancellous screws self tapping fully threaded,3.5mm dia, l 35 60mm (5mm increment),ss , cancellous screws self tapping fully threaded, 3.5mm dia,l 65 105mm (5mm increment),ss , cancellous screws self tapping fully threaded ,3.5 mm dia, l 10 30mm (2mm increments),titanium , cancellous screws self tapping fully threaded, 3.5mm dia, l 35 60mm (5mm increment),titanium , cancellous screws self tapping fully threaded, 3.5mm dia, l 65 105mm (5mm increment)titanium , cancellous screws fully threaded,4mm dia, l 10 60mm (2mm increment), ss , cancellous screws partially threaded ,4mm dia, l 10 58mm (2mm increment),ss , cancellous screws partially threaded,4mm dia, l 60 90mm, ss , cancellous screw partially threaded,4mm dia, l 10 30mm (2mm increment),titanium , cancellous screws partially threaded 4 mm dia,l 35 60mm (5mmincrement)titanium , cancellous screws fully threaded 4 mm dia, l 10 60mm,titanium , cancellous screws 6.5mm dia 16mm thread length 25mm to 70mm (5mmincrement)ss , cancellous screws 6.5mm dia 16mm thread length 75mm to 110mm (5mm increment)ss , cancellous screws 6.5mm dia 32mm thread length 25mm to 70mm (5mm increment)ss , cancellous screws 6.5mm dia 32mm thread length 75mm to 110mm (5mm increment)ss , cancellous bone screws 6.5mm,fully threaded, l (20mm 110mm) (5mm increment,ss , cancellous screws 6.5mm dia 16mm threaded length 25mm to 70mm (5mm increment)titanium , cancellous screws 6.5mm dia 16mm threaded length 75mm to 110mm (5mm increment)titanium , cancellous screws 6.5mm dia 32mm partially threaded length 30mm to 70mm (5mm increment)titanium , cancellous screws 6.5mm dia 32mm partially threaded length 75mm to 120mm (5mm increment)titanium , cancellous screws 6.5mm dia,fully threaded,l 45 150mm(5mm increment) titanium , malleolar screws 4.5mm dia, l 25 70mm(5mm increment),ss , malleolar screws 4.5mm dia, l 25 80mm(5mm increment),titanium , cannulated cancellous screws 3.5 mm dia,self drilling short threaded , l 10 30mm(2mm increment),ss , cannulated cancellous screws 3.5 mm dia,self drilling fully threaded , l 10 30mm(2mm increment),ss , cannulated cancellous screws 3.5 mm dia,self drilling short threaded , l 10 30mm (2mm increment),titanium , cannulated cancellous screws 3.5 mm dia,self drilling fully threaded ,l 10 30mm (2mm increment),titanium , cannulated cancellous screws 4mm dia,short threaded,l 20 60mm (2mm increment),ss , cannulated cancellous screws 4mm dia,fully threded, l 20 60mm (2mm increment),ss , cannulated cancellous screws 4mmdia,short threaded,l 20 60mm (2mm increment),titanium , cannulated cancellous screws 4mm dia,fully threeed,l 20 60mm (2mm increment),titanium , cannulated screws 4.5mm dia, short threaded,l 20 60mm (2mm increment),ss , cannulated screws 4.5mm dia, fully threaded, l 20 60mm (2mm increment),ss , cannulated screws 4.5mm dia, short threaded,l 20 60mm (2mm increment), titanium , cannulated screws 4.5mm dia, fully threaded, l 20 60mm (2mm increment), titanium , cannulated screws 6.5mm dia,short threaded,l 30 60mm (5mm increment),ss , cannulated screws 6.5mm dia,short threaded,l 65 130mm (5mm increment),ss , cannulated screws 6.5mm dia,fully threaded,l 30 60mm (5mm increment),ss , cannulated screws 6.5mm dia,fully threaded,l 65 130mm (5mm increment),ss , cannulated screws 6.5mm dia,short threaded,l30 60mm (5mm increment), titanium , cannulated screws 6.5mm dia, short threaded,l 65 130mm (5mm increment), titanium , cannulated screws 6.5 mm dia, fully threaded,l 30 60mm (5mm increment), titanium , cannulated screws 6.5 mm dia, fully threaded,l 65 130mm (5mm increment), titanium , large cannulated cancellous screws 7mm dia,16mm thread length 50mm to120mm (5mm increament)ss , large cannulated cancellous screws 7mm dia, 32mm thread length 50mm to120mm (5mm increment)ss , large cannulated cancellous screws 7mm dia,16mm thread length 50mm to 120mm (5mm increament)titanium. , large cannulated cancellous screws 7mm dia, 32mm thread length 50mm to120mm (5mm increment)titanium , locking head screws 2.7mm dia (head 2.4), self tapping, l 14 60mm,ss , locking head screws 2.7mm dia (head 3.5), self tapping, l 20 60mm,ss , locking head screws 3.5mm dia, self tapping, l 10 24mm(2mm increment),ss , locking head screws 3.5mm dia, self tapping, l 26 48mm(2mm increment),ss , locking head screws 4.5mm dia,self tapping, l 16 85mm, ss , locking head screws 5mm dia, l 10 48 mm (2mm increment),ss , locking head screws 5mm dia, l 50 85 mm (2mm increment),ss , locking head cancellous screws 5mm dia, l 50 85mm (2mm increment)ss , locking head cancellous screws 6.5 mm dia, l 20 100mm, ss , locking head screws 2mm dia,self tapping, l 6 30mm, titanium , locking head screws 2.4 mm dia, self tapping, l 6 30mm titanium , locking head screws 2.7mm dia (head 2.4), self tapping, l 14 60mm,titanium , locking head screws 2.7mm dia (head 3.5), self tapping, l 20 60mm,titanium , locking head screws 3.5mm dia, self tapping, l 10 24mm (2mm increment),titanium , locking head screws 3.5mm dia, self tapping, l 26 48mm(2mm increment), titanium , locking head screws 4.5mm dia, self tapping,l 16 85mm,titanium , locking head screws 5mm dia, l 10 48 mm (2mm increment),titanium , locking head screws 5mm dia,l 10 48 mm (2mm increment),titanium , locking head screws 5mm dia,l 50 85 mm (5mm increment),titanium , locking head cancellous screws 5mm dia, l 50 85mm (5mm increment), titanium , cannulated locking head screws 5mm dia, l 25 75mm,ss , cannulated locking head screws 5mm dia, l 80 120mm,ss , cannulated locking head screws 5mm dia, l 25 75mm,titanium , cannulated locking head screws 5mm dia, l 80 120mm,titanium , locking cancellous screws 6.5mm dia, l 20 60mm,titanium , locking cancellous screws 6.5 mm dia,l 65 100mm,titanium , headless compression screws 2.4mm,self drilling,cannulated, l 9 30mm,titanium , headless compression screws 3mm,self drilling,cannulated, l 10 40mm,titanium , headless compression screws short threaded 4.5mm,self drilling, cannulated , l 20 60mm(increment of 2mm),titanium , headless compression screws long threaded 4.5mm,self drilling, cannulated, l 20 60mm(increment of 2mm),titanium , headless compression screws short threaded 4.5mm,self drilling,cannulated, l 65 80mm(increment of 5mm),titanium , headless compression screws long threaded 4.5mm,self drilling,cannulated, l 65 80mm(increment of 5mm),titanium , headless compression screws short threaded 6.5mm,self drilling,cannulated, l 20 60mm(increment of 2mm),titanium , headless compression screws long threaded 6.5mm,self drilling,cannulated, l 20 60mm(increment of 2mm),titanium. , headless compression screws short threaded 6.5mm,self drilling,cannulated, l 65 100mm(increment of 5mm), titanium. , headless compression screws long threaded 6.5mm,self drilling,cannulated, length65 100mm(increment of 5mm),titanium. , shaft screws 3.5mm ,l 12 60 mm,ss , shaft screws 4.5mm ,l 22 80 mm,ss , washer for 4.0 mm cancellous screws,ss , washer for 4.5 mm malleolar screws,ss , washer for 6.5 mm cancellous screws,ss , spiked washer for cancellous bone screw 6.5mm dia, 13.5mm x 6mm,ss , spiked washer for 4.0mm cancellous screw,ss , washer10 mm dia., titanium , washer13 mm dia.,titanium , hemispherical washer for 6.5 mm screws,ss , washer holding clip , drill bit (stainless steel),1mm , drill bit (stainless steel) ,1.5mm , drill bit (stainless steel),2mm,l 85 mm ,2 flute , drill bit (stainless steel) with quick coupling end,2.5mm, l 100mm , drill bit2.5mm with quick coupling end,titanium. , drill bit (stainless steel) 2.7mm, 2 flute with quick coupling end , drill bit (stainless steel) 2.7mm, 3 flute with quick coupling end , drill bit (stainless steel) 3.2mm , 2 flute with quick coupling end , drill bit (stainless steel) 3.2mm , 3 flute with quick coupling end , drill bit (stainless steel) 3.5mm with quick coupling end , drill bit (stainless steel) 4.5mm with quick coupling end , drill bit (stainless steel) 3.5mm extra long , dril bit (stainless steel)4.3mm extra long , 2.8mm graduated drill bit for locking compression plate,ss , 4.3mm graduated drill bit for locking compression plate , cannulated drill bit 2.5mm dia,ss , cannulated drill bit 2.7mm dia,ss , cannulated drill bit 3.2mm dia,ss , cannulated drill bit 3.5mm dia,ss , cannulated drill bit 4.5mm dia,ss , cannulated drill bit 5mm dia,ss , bone tap with t handle 1.5mm , bone tap with t handle 2 mm , bone tap with t handle 2.7mm , bone tap with t handle 3.5mm , bone tap with t handle 4.5mm , bone tap with t handle 6.5mm , cannulated bone tap 2.5mm dia , cannulated bone tap 3.5mm dia , cannulated bone tap 4.5mm dia , cannulated bone tap 6.5mm dia , cannulated bone tap 7mm dia , quick coupling handle & tap set , quick coupling handle. , quick coupling bone tap,3.5mm , quick coupling bone tap,4.5mm , screw driver non canulated 2.7mm,hexagonal , screw driver non canulated 3.5mm,hexagonal , screw driver non canulated 4.5mm,hexagonal , screw driver canulated 3.5mm,hexagonal , screw driver canulated 4.5mm,hexagonal , screw driver canulated 7mm,hexagonal , screw driver star shaped 2.4 mm , screw driver star shaped 3.5 mm , screw driver star shaped 4.5 mm , screw driver for biocomposite screws , torque limiting screw driver for 3.5mm locking head screw , torque limiting screw driver for 4.5/5mm locking head screw , quick coupling handle with quick coupling screw driver shaft ,3.5 mm , quick coupling handle with quick coupling screw driver shaft ,4.5 mm , universal hand drill machine open type with chuck. , universal hand drill machine closed type with chuck , mini hand drill for hand fractures with chuck , single pin clamp , double pin clamp , open double pin clamp , twin adjustable clamp straight , twin adjustable clamp curved , transverse clamp , connecting clamp , single pin clamp with extension plate , double pin clamp with extension plate. , connecting rod 5mm , spanner 11mm , spanner 13mm , t wrench 11mm , box spanner 11mm , triple tocar set with handle , tubular rod 4 , tubular rod 6 , tubular rod 8 , tubular rod10 , tubular rod 12 , tubular rod 14 , tubular rod 16 , tubular rod 18 , tubular rod 20 , tube to tube clamp , threaded schanz pins (self tapping) 3.5mm dia.,shaft 4mm ,short threaded, l 125mm. , threaded schanz pins (self tapping) 4mm dia.,short threaded, l 100 200mm , threaded schanz pins (self tapping) 4mm dia.,long threaded, l 100 200mm , threaded schanz pins (self tapping) 4.5mm dia.,short threaded, l 100 200mm , threaded schanz pins (self tapping) 4.5mm dia.,long threaded, l 100 200mm , threaded schanz pins (self tapping) 5mm dia.,short threaded, l 100 200mm , threaded schanz pins (self tapping) 5mmdia., long threaded, l 100 200mm , cancellous front threaded 5 mm schanz pins,thread length 16mm, l 100 200mm , cancellous front threaded 5mm schanz pins, thread length 32mm, l 100 200 mm , cancellous front threaded 5mm schanz pins , thread length 50mm, l 100 200 mm , threaded schanz pins 2mm dia. , threaded schanz pins 2.5mm dia. , threaded schanz pins 3.0mm dia. , threaded schanz pins 3.5mm dia. , small external fixator for forearm , small single pin clamp 4.0 x 2.5mm for 2 & 2.5mm schanz pins. , small single pin clamp 4.0 x 4.0mm for 3.5mm schanz pins. , small connecting clamp 4.0 x 4.0mm , connecting rods 4.0 mm dia length 100 to 300mm (50mm increment) , open small single pin clamp 4.0 x 2.5mm , open small connecting clamp 4.0 x 4.0mm , small compression distraction device: size 60mm,75mm,100mm,150mm , spanner 8mm , t wrench 8mm , ball & sockettype distractor set with 360° rotation compatible with2.5 mm & 3.5 mm schanz screw.(rate to be quoted for one set consist of ball & socket distractor assembly with two 2.5 mm & two 3.5 mm schanz screw) , mini external fixator set for hand , k wire with threaded tip 1.25mm,l 100 mm , k wire with threaded tip 1.6mm,l 100 mm , schanz pin 2.5mm,various sizes , connecting rod 3mm,various sizes , universal clamps for 1.25mm & 1.6mm wire , connecting clamps , dc assembly , femoral distractor set , limb reconstruction system (rail road ) for bone lengthening/ bone transport adult , rail rod, l 200 400mm , central clamp , swivel clamp , end clamp , compression distraction device , compatible allen key for compression distraction device , compatible spanner for compression distraction device , schanz pin 6mm, tappered 4.5mm to 3.5mm. , schanz pin 6mm, tappered 6mm to 5mm. , schanz pin 6mm ,tappered 4.5mm to 3.5mm with hydroxyapetite (ha) coating for threads , schanz pin 6mm ,tappered 6mm to 5mm with hydroxyapetite(ha) coating forthreads. , limb reconstruction system (rail road ) for bone lengthening/ bone transport paediatrics , rail rod, l 150 250mm , central clamp , swivel clamp , end clamp , schanz pin 4mm, tappered 3.5mm to 3mm. , compression distraction device , compatible allen key for compression distraction device , compatible spanner for compression distraction device , schanz pin 6 mm ,tappered 4.5 mm to 3.5 mm with hydroxy apetite(ha) coating for threads , ctev set (small) , link joint 30 , connecting rods 2.5mm , st. 4 3, 6 2, 8 2 , z rods 2 , l rods large 2, small 2 , distractor 4mm 4 2, 6 2 , foot plate 1 , k wires 2mm 6 2 , k wires 1.6mm 6 6 , allen keys , ctev set (medium) , link joint 30 , connecting rods 3mm , st. 5 3,6 2, 10 2 , z rods 2 , l rods (large) 2,(small) 2 , distractor 4mm 4 2,6 2 , foot plate 1 , k wires (2mm) 5 3,6 2 , allen keys , ctev set (large) , clamps4x2.5mm 9 , clamps4x4mm 12 , connecting rods 6 5,12 3 , distractors 4mm 6 2 , d.c. rods 2 , foot plate 1 , k wires2.5mm 5 5,2.0mm 6 6 , allen keys , spring jess fixator set for ctev , ilizarov ring fixator system(complete system of ilizarovfrom 472il 1 to 472il 67 ) , half rings (the holes should match with the stainless steel ring)sizes 80,100,110,120,130,140,150,160, 180,200,220 mm ,carbon fibre frame , half rings (the holes should match with the carbon ring) sizes 80,100,110,120,130,140,150,160,180,200,220 mm, ss , fixator set 5/8 ring(sizes100, 110,120,130, 140, 150, 160, 180,200 mm), ss , cannulated bolt , connection bolt , slotted bolt , nuts , bushing , telescopic rod 100mm , telescopic rod 150 mm , telescopic rod 200 mm , telescopic rod 250mm , telescopic rod 300 mm , telescopic rod 350 mm , telescopic rod, graduated 60mm, , telescopic rod, graduated 100 mm , telescopic rod, graduated 150 mm , telescopic rod, graduated 200mm, , telescopic rod, graduated 250 mm , male post , female post , male hinge , female hinge , male hinge, low profile , female hinge, low profile , hinge 90° standard , hinge 90° low profile , washer ,1.5mm , spacing washer,2mm , split locking washer,2mm , slotted washer,4mm , flat sided washer,2mm , flat sided washer ,4mm , conical couple washer , italian arch , threaded socket & buckle , short connection plate , curved connection plate , wire fixation nut + bolt, central hole , wire fixation nut + bolt, side hole , square nut , threaded rod 60,80,100,120,150 mm , threaded rod 200,250,300,350,400 mm , threaded rod, slotted40,60, 80,100 mm , oblique support connection , translation & rotational device , twisted plate , multiple pin fixation clamp , single schanz pin fixation bolt , wires with bayonet tip, cortical 1.5x(300 400mm) , wires with bayonet tip, cortical 1.8x(300 400mm) , wires with trocar tip 1.5x(300 400mm) , wires with trocar tip 1.8x(300 400mm) , stopper wire(olive wire)one piece,1.5x(300 400mm) , stopper wire (olive wire)one piece,1.8x(300 400mm) , spanner 10 mm , t wrench10mm , box spanner , universal hinge , wrench cubes , wire tensioner, dynamic , wire tensioner, manual , wire fixation buckle , schanz pins tappered 6mm 5mm, all sizes & length , computer assisted multi axial deformity correction system complete set with computer software for tibia , computer assisted multi axial deformity correction system complete set with computer software for femur , negative suction drainage set (single tube, disposable, sterile),size:10 18fg , negative suction drainage set (double tube, disposable, sterile) , size:10 18fg , sterile u draps with adhesive strip (double layer disposable),size:200 x 240cmmedical grade fabric not less than 60 gsm , sterile u draps with adhesive strip(double layer disposable),size:160 x 200cmmedical grade fabric not less than 60 gsm , sterile knee o drape with adhesive strip (reinforced impermeable 3 layer fabric), size:200 x 320cm , sterile double knee o drape with adhesive strip (reinforced impermeable 3 layer fabric), size:200 x 320cm , sterile elbow drape with adhesive strip (reinforced impermeable 3 layer fabric), size:150 x 250 cm , sterile knee drape with adhesive strip(reinforced impermeable 3 layer fabric) with absorbent centre sheet size 75 x 100cm &total size: 120 x 160cm , sterile hip u drape with adhesive strip(reinforced impermeable 3 layer fabric)with absorbent centre sheet size 100 x 150cm &total size:200 x 300cm , sterile hip u drape with adhesive strip(reinforced impermeable 3 layer fabric)with absorbent centre sheet size 100 x 150cm & attached leg pouch, totalsize 200 x 240cm,medical grade sms (sms=spun +melt bloun+spun)fabric. , sterile spinal drape(reinforced impermeable 3 layer fabric)with adhesive strip on centralaperture ,8 x 12cm,with absorbent centre sheet size 100 x 150cm , total size: 150 x 300cm , sterile knee arthoscopy drape (reinforced impermeable 3 layer fabric)size:200 x 300cm with fluid collection pouch. , sterile disposable wrapping drape (ldpe),size:15 x 100cm , sterile disposable wrapping drape (ldpe),size:30 x 150cm , sterile cling film roll,size:12 x 100 cm. , face mask with splash guard tying type , sterile disposable leggingwith fluid repellant fabric(pair per pack) , sterile c arm cover (pair per pack) , screen cover (transparent) with adhesive strip,size:160 x 200cm , mackintosh sheet,autoclavable,size:1 x 2 meter(rubber). , disposable sterile water proof sheets (double packed), 150 x 200cm , incise drape, size:20 x 30 cm , incise drape, size: 30 x 30 cm , incise drape, size:30 x 45 cm , incise drape, size:40 x 45 cm , incise drape, size:45 x 60 cm , povidone iodine impregnated incise drape, size: 20 x (20 30)cm , povidone iodine impregnated incise drape, size: 25 x (30 40)cm , povidone iodine impregnated incise drape, size: 35 x (40 45)cm , povidone iodine impregnated incise drape, size: 45 x (60 70)cm , povidone iodine impregnated incise drape, size: 66 x 60 cm , povidone iodine and chlorhexidine gluconate impregnated incise drape,size:13 x 13 , povidone iodine and chlorhexidine gluconate impregnated incise drape, size: 16x 20 , povidone iodine and chlorhexidine gluconate impregnated incise drape, size: 23x 17 , povidone iodine and chlorhexidine gluconate impregnated incise drape, size: 23x 33 , anti microbial pre operative skin sealant for protection against skin flora and pathogens mrsa migration into surgical incision,approximate pre operative covering area25cm x 25cm , anti microbial pre operative skin sealant for protection against skin flora and pathogens mrsa migration into surgical incision,approximate pre operative covering area25cm x 50cm , trolley cover, size:125 x 150cm , trolley cover, size:150 x 200cm , camera cover(pre sterile disposable) with 2 tying string. , cable cover(pre sterile) , camera cover(pre sterile disposable) with 2 tying string. , cable cover(pre sterile) , orthopaedic sterile surgical gloves (powdered)1) natural latex, double wall (thickness should not be less than 0.61 mm at finger,0.50 mm at palm and 0.48 mm at cuff)2) sizes 6,6.5,7,7.5 and 83) latex should be of good quality, non toxic, hypo allergic and coarse granular on palmar side4) tactile sensitivity should be maintained5) anatomical shape for maximum comfort6) bsi/ce/fda certified, size should be marked with unwashable ink7) pre powdered with absorbable corn starch8) one pair per pouch , orthopaedic sterile surgical gloves (powder free)1) natural latex double wall (thickness should not be less than 0.33 mm at finger ,0.30 mm at palm and 0.26 mm at cuff )2) size: 6,6.5,7,7.5 and 83) latex should be of good quality, non toxic, hypo allergic and coarse granular on palmar side,4) tactile sensitivity should be maintained5) anatomical shape for maximum comfort6) bsi/ce/fda certified, size should be marked with unwashable ink7) one pair per pouch , sterile viral protection gloves1) should have disinfecting liquid between gloves layer which can reducethe transmitted viral load(hiv,hcv,hbs)in case of blood exposure accident2) size: 6,6.5,7,7.5 and 83)bsi/ce/fda certified , radiation protection gloves1)re usable2)size: 6,6.5,7,7.5 and 8 3)bsi/ce/fda certified , cervical collar soft with eyelets contour to accommodate chin,double layered foam,s/m/l , cervical collar soft with eyelets contour to accommodate chin,double layered foam,xl , cervical collarhard (adjustable type) contour to accommodate chin,s/m/l , cervical collarhard (adjustable type) contour to accommodate chin,xl , philadelphia collar , s/m/l , somi brace ,universal size , dorso lumber spinal orthosis taylors spinal brace,small , dorso lumber spinal orthosis taylors spinal brace,medium , dorso lumber spinal orthosis taylors spinal brace,large , a.s.h brace(hyper extension brace )adaptable to fit all sizes , halovest brace,s/m/l (to be made patient specific) , l.s. bracewith four mouldable alluminium strip,small , l.s. bracewith four mouldable alluminium strip,medium , l.s. bracewith four mouldable alluminium strip,large , l.s. bracewith four mouldable alluminium strip, xtra large , humerous brace,s/m/l , fore arm brace (functional brace) , femur brace with waist support for abduction of hip , tibia brace,s/m/l , ankle foot orthosis (afo) ,small , ankle foot orthosis (afo) ,medium , ankle foot orthosis (afo) ,large , ankle foot orthosis (afo) ,xtra large , clavicular brace (children) ,s/m/l , clavicular brace (adult) ,s/m/l , rib belt male breathable 6 width elastic band, velcro closure, s/m/l , rib belt male breathable 6 width elastic band, velcro closure, xl , rib belt female breathable 6 width elastic band, velcro closure, design to fit properly to female patient, s/m/l , rib belt female breathable 6 width elastic band, velcro closure, design to fitproperly to female patient, xl , knee cap(multi directional stretch) should be made of high quality elastic band ofminimum10 width, tubular design, s/m/l , knee cap(multi directional stretch) should be made of high quality elastic band ofminimum10 width, tubular design, xl , knee cap with patellar hole neoprene material, universal size , elastic knee support without hinges, s/m/l , elastic knee support without hinges, xl , elasticknee support with hinges should haveminimum 9 elastic panel as base material, rigid metallic hinge splints(2nos),multi panel velcro buckle closure for proper fitting, s/m/l , elasticknee support with hinges should haveminimum 9 elastic panel as basematerial, rigid metallic hinge splints(2nos),multi panel velcro buckle closure for proper fitting, xl , post operative knee immobilizer should be made of breathable, foam fused fabric, lateral & posterior light metal stays, pre contoured for easy walking, splint should beflexible so that it can be bent or straightened, buckle and velcro closure above & below knee for proper fitting, s/m/l , post operative knee immobilizer should be made of breathable, foam fused fabric, lateral & posterior light metal stays, pre contoured for easy walking, splint should beflexible so that it can be bent or straightened, buckle and velcro closure above & below knee for proper fitting, xl , knee brace with hinges with patellar cushion, s/m/l , knee brace with hinges with patellar cushion, xtra large , knee brace without hinges with patellar cushion, small , knee brace without hinges with patellar cushion, medium , knee brace without hinges with patellar cushion, large , knee brace without hinges with patellar cushion, xtra large , range of motion knee brace, s/m/l , range of motion knee brace, xtra large , physiotherapy paraffin wax,1kg , physio therapy paraffin wax,5kg , gymnasium ball,75 cm , physiotherapy clay,1 kg , stockinette (disposable),2x 5 meter(cotton). , stockinette (disposable) ,3x 5 meter(cotton). , stockinette (disposable),4x 5 meter(cotton). , stockinette (disposable) ,5x 5 meter(cotton). , stockinette (disposable),6x 5 meter(cotton). , arm sling pouch should be made up of soft quality fabric,should have non stretching strap,adjustable,closure with velcroplastic buckles, s/m/l , arm sling pouch should be made up of soft quality fabric,should have non stretching strap,adjustable,closure with velcroplastic buckles,xl , ankle wrap,3 elastic band with valcro closure,s/m/l , ankle wrap,3 elastic band with valcro closure,xl , ankle brace should be made up of foam fused fabric,should have semi rigid plastic splints on both side of brace,velcro closure and plastic buckles for locking, sizes s/m/l , ankle brace should be made up of foam fused fabric,should have semi rigid plastic splints on both side of brace,velcro closure and plastic buckles for locking, sizes xl , tennis elbow band(high strength foam padded strap),s/m/l , tennis elbow band(high strength foam padded strap),xtra large , wrist binder with thumb support , shoulder immobilizer,s/m/l , shoulder immobilizer, xl , cot finger splint(u shaped to keep finger in straight position),s/m/l , frog splint (four leg construction allow self closing for immobilization of dipjoint in extension & pip joint in flexion), s/m/l , spoon splint(to keep finger tip in extension),s/m/l , protector splint for finger tip injury (+ mark design to protect finger tip from all around),s/m/l , base ball splint for distal phalanx injury (finger tip fold over design),s/m/l , malletfinger splint (splint to keep dip joint in 10° hyper extension),s/m/l , finger extension splint(spring wire construction for keeping finger in extension),s/m/l , finger flexion splint (spring wire construction for keeping finger in flexion),s/m/l , thumb spica splint , knuckle bender splint , carpel tunnel splint day time , carpel tunnel splint night time , arm sling strap heavy duty strap with two way buckle system , wrist & fore arm splint(right & left) , static wrist cock up splint(right & left),s/m/l , dynamic wrist cock up splint(right & left) , foot drop splint,s/m/l , foot drop splint, xl , boot and derotation bar splint , compression stockings(above knee) (latex free) with moderate compression, s/m/l , compression stockings(below knee)(latex free) with moderate compression, s/m/l , resistance band for stage 1to stage 6(for resistance rehabilitation exercise) , various thickness , bolster,s/m/l , triangular pillow for abduction of hip , silicon heel cushion (right & left),s/m/l , silicon insole,s/m/l , silicon arch pad,s/m/l , silicon metatarsal pad,s/m/l , silicon toe spacer , cast shoe,s/m/l , cast shoe,xl , kramer wire splint ,width 7.5cm,l 100cm , kramer wire splint ,width 10cm, l 100cm , thomas splint (well padded thigh ring), small , thomas splint (well padded thigh ring),medium , thomas splint (well padded thigh ring),large , bohler brown splint , small , bohler brown splint, medium , bohler brown splint, large , bohlers stirrup, small , bohlers stirrup ,medium , bohlers stirrup ,large , screws for bohler stirrup , walker fixed type , walker adjustable & foldable (coated aluminium frame work with comfortable hand grips , auxillary crutches(adjustable height),aluminium , elbow crutches(adjustable height),aluminium , walking stick,aluminium mono pod with handle grip and rubber tip. , walking stick,aluminium tri pod with handle grip and rubber tip. , walking stick,aluminium tetra pod with handle grip and rubber tip. , wheel chair(foldable) mag wheel,seat width 16/18,weight capacity> 99 kg,fixed arm rest,8 solid caster,24 solid rear wheel,double crossed bar. , wheel chair(foldable) with commode mag wheel,seat width 16/18,weight capacity > 99 kg,fixed arm rest,8 solid caster,24 solid rear wheel,double crossed bar. , wheel chair mag wheel,seat width 16/18,weight capacity > 99 kg,fixed arm rest,8 solid caster,24 solid rear wheel. , wheel chair with commode mag wheel,seat width 16/18,weight capacity > 99 kg,fixed arm rest,8 solid caster,24 solid rear wheel. , lumbar traction kit with rod (all sizes) , cervical traction kit with rod (all sizes) soft foam padding , pelvic traction kit with rod , b/k skin traction kit with velcro strap , leg traction kit with pully , buck pulley , plastic pulley (single) , balkan frame with accessories compatible with hospital beds , weight cuff, 1/2 kg , weight cuff ,1 kg , weight cuff ,2 kg , weight cuff, 3 kg , bone marrow aspiration system , bone biopsy needle (jamshidi) any size , tru cut biopsy gun (disposable) , suction cannula fergusson dia. 1 mm, work length 200 mm,metal , suction cannula fergusson dia. 2 mm, work length 200 mm,metal , suction cannula fergusson dia. 3 mm, work length 200 mm,metal , suction cannula fergusson dia. 4 mm, work length 200 mm,metal , suction cannula fergusson dia. 5 mm, work length 200 mm,metal , bone currate,small , bone currate,medium , bone currate,large , bone nibbler, small , bone nibbler ,medium , bone nibbler,large , bone nibbler double action straight, small , bone nibbler double action straight, medium , bone nibbler double action straight, large , bone nibbler double action curved,small , bone nibbler double action curved,medium , bone nibblerdouble action curved, large , bone osteotome fibre handle straight,10 mm , bone osteotome fibre handle straight,15 mm , bone osteotome fibre handlestraight,20 mm , bone osteotome fibre handlel curved, 10 mm , bone osteotome fibre handlecurved ,15 mm , bone osteotome fibre handle curved ,20 mm , bone chisel full metal,10 mm , bone chisel full metal, 15 mm , bone chisel full metal,20 mm , bone gouge straight,5 mm , bone gouge straight,10 mm , bone gouge straight,15 mm , bone gouge curved,5 mm , bone gouge curved,10 mm , bone gouge curved,15 mm , bone hook,sharp,small , bone hook,sharp,medium , bone hook,sharp,large , hammer, small(250gm) , hammer, medium(500gm) , hammer ,large(750gm) , bone cutter liston double action,straight,medium , bone cutter liston double action,curved,medium , bone cutter , medium , bone cutter , large , plier with wire cutter , small , plier with wire cutter , medium , plier with wire cutter , large , plier with flat nose , small , plier with flat nose , medium , plier with flat nose , large , wirecutter straight ,smalltc coated , wirecutter straight ,mediumtc caoted , wirecutter straight ,large tc caoted , wirecutter curved,small , wirecutter curved ,medium , wirecutter curved ,large , wire cutter,diamond tipped,front cutting with ability to cut up to 3mm wire , t handle for k wires , t handle with jacob chuck & key for schanz pins , humbey knife , humbey blades , lanes bone lever plain,small , lanes bone lever plain,medium , lanes bone lever plain,large , lanes bone lever serrated ,small , lanes bone lever serrated ,medium , lanes bone lever serrated ,large , hohmans retractore ,4mm , hohmansretractor, 8 mm , hohmansretractor, 12 mm , hohmansretractor, 18 mm , hohmansretractor, 24 mm , hohmansretractor, 30 mm , hohmansretractor, 70 mm , jumbocutter forcutting plates & rods,medium , jumbocutter forcutting plates & rods,large , plateholdingforcep, small , plateholdingforcep ,medium , plateholdingforcep ,large , plateholdingforcep with self center speed lock ,small , plateholdingforcep with self center speed lock ,medium , plateholdingforcep with self center speed lock ,large , boneholdingforcep,small , boneholdingforcep,medium , boneholdingforcep,large , boneholdingforcep with self center speed lock ,small , boneholdingforcep with self center speed lock ,medium , boneholdingforcep with self center speed lock ,large , bone reamer for radius and ulna, all sizes , bone reamer for tibia , all sizes , bone reamer forfemur,all sizes , bone reamer for tibia cannulated,all sizes , bone reamer forfemur cannulated,all sizes , flexible bone reamer for tibia,all sizes , flexible bone reamer forfemur,all sizes , patellaforcep with speed lock , malleolarforcep with speed lock , reductionforcep toothed with speed lock,l 170mm , pointed reduction holding forcep,small,140mm , pointed reduction holding forcep,medium,180mm , pointed reduction holding forcep,large,210mm , periarticular reduction forecep medium with pointed ball tips , periarticular reduction forecep large with pointed ball tips , pelvic reduction forcep,standard size , perisoteum elevator straight, 4mm , periostium elevator straight , 6mm , periostium elevator straight ,10mm , periostium elevator straight ,16mm , periostium elevator curved , 4mm , periostium elevator curved , 8mm , periostium elevator curved ,12mm , langenbeck soft tissue retractor ,small , langenbeck soft tissue retractor ,medium , langenbeck soft tissue retractor ,large , backhaus towel clamp,90mm , backhaus towel clamp,135mm , kocher ochsner forecep, straight1x2 ,200mm , kocher ochsner forecep, curved1x2 ,200mm , mayo hegar needle holder, heavy duty,150mm , mayo hegar needle holder, heavy duty,185mm , ryder needle holder, 195mm , discetomy forcep straight (inter vertebral disc rongeurs) cup size 2x10 mm , discetomy forceps straight (inter vertebral disc rongeurs) cup size4x10 mm. , discetomy forceps angled up & down (inter vertebral disc rongeurs) cup size 2x10 mm , discetomy forceps angled up & down (inter vertebral disc rongeurs) cup size 4x10mm , self retaining retractor without hinges, small , self retaining retractor without hinges, medium , self retaining retractor without hinges,large , self retaining retractor with hinges ,small , self retaining retractor with hinges ,medium , self retaining retractor with hinges ,large , spine bone cutting rongeur , spine bone punch (kerrison punch)upcutting ,small , spine bone punch (kerrison punch)upcutting ,medium , spine bone punch (kerrison punch)upcutting ,large , spine bone punch (kerrison punch)downcutting ,small , spine bone punch (kerrison punch)downcutting ,medium , spine bone punch (kerrison punch) downcutting ,large , self retaining laminectomy retractor , nerve root retractor,straight , nerve root retractor,curved 45° , nerve root retractor,curved 90° , rib shear (left & right) , thoracotomy rib retractor , bulldog clamp, small , bulldog clamp, medium , bulldog clamp, large , wire passer ,tube type small , wire passer ,tube type medium , wire passer ,tube type large , wire passer ,bender tube type small , wire passer ,bender tube type medium , wire passer ,bender tube type large , wire tension tensner forceps type small , wire tension tensner forceps type medium , wire tension tensner forceps type large , damaged screw removal set , hollow reamers for 3.5/4 mm screws , hollow reamers for 4.5 mm screws , spare reamers tubes for hollow reamers for each above , extraction bolt for 3.5/4 mm screws , extraction bolt for 4.5 mm screws , extraction bolt for 5/6.5/7 mm screws , extraction screws conical for 2.7/3.5 and 4 mm screws , extraction screws conical for 4.5 mm screws , extraction screws conical for 5/6.5 and 7 mm screws , forceps for screw removal , universal interlocking nail removal set , conical bolt of various sizes to fix in all type of interlocking nail , nail extractor assembly over conical bolt , nail extraction hook for 9mm 11mm dia.nail , nail extraction hook for 12mm 14mm dia.nail , crutch field tongs adult with guarded drill bit , crutch field tongs paed with guarded drill bit , skin marking pen ,sterile , sialastic silicon rod for tendon repair surgery dia 2mm l:300mm , sialastic silicon rod for tendon repair surgery dia 3mm l:300mm , sialastic silicon rod for tendon repair surgery dia 4mm l:300mm , bone wax containing alkylene oxide copolymer 1 gm, , bone wax containing alkylene oxide copolymer 2.5gm , bone wax containing alkylene oxide copolymer 3.5gm , silicon vessel loops , sterilizing box for ilizarov set . , sterilizing box with tray for instruments small , sterilizing box with tray for instruments medium , sterilizing box with tray for instruments large , sterilizing cylindrical box for long guide wire of inter locking nail. , small fragment surgerygraphic screw box with measuring gauge at topwith options of 3.5mm cortical ,3.5mm locking ,4mm solid cancellous as well as partial and full threaded 4mm canulated cancellous screw , large fragment surgery graphic screw box with measuring gauge at topwith options of 4.5mm cortical,5mm locking, 6.5mm solid plus canulated cancellous screw box , 4mm solid as well as canulatedgarphic screw screw boxwith enough space for instrumenation such as guide wire, drill and screw driver , 6.5mm solid as well as canulated cancelous graphic screw box with enough space for instrumenation such as guide wire,drill, tap screw driver and angle guide,should be of enough height as to accomadate large screw lengths , 7 mm solid as well as canulated cancelous graphic screw box with enough space for instrumenation such as guide wire,drill, tap screw driver and angle guide should be of enough height as to accomadate large screw lengths , graphic instruments box for arthroscopy hand instrumnets , , autoclaveable k wire container150mm k wire , autoclaveable k wire container300 mm k wire , disposable hair clipper blade:ce marked,designed to cut and remove hair away from skin,(should supply with blade handle) , stainless steel measuring scale ,various sizes , traction weight with hanger system , weight hanger , traction weight ,1 kg , traction weight ,2 kg , traction weight ,5 kg , manual pneumatic touniquet set with silicone cuff with tubes(adult) , manual tourniquet pump(adult) , silicone cuff with tubes , all sizes (adult) , manual pneumatic touniquet set with silicone cuff with tubes (paediatric) , manual tourniquet pump(paediatric) , silicone cuff with tubes ,all sizes(paediatric) , cervical disc replacement system metal on poly , cervical disc prosthesis metal on metal two piece with anterior translation, pre sterile , anterior cervical inter body fusion peek cage size , height 5 12 mm , anterior cervical peek inter body fusion spacer and plate with intigrated double screws for each vertibra, 5 12 mm , anterior cervical peek inter body fusion spacer and plate with intigrated single screw for each vertibra, 5 12 mm , low profile cervical locking fixation plate with 4 self drilling & self locking screw, single level , low profile cervical locking fixation plate with 6 self locking screw, double level , anterior mesh cage for cervical spine,titanium , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw,single level with 4 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw,double level with 6 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw,three level with 8 screw , cervical laminoplasty plate system , posterior cervicallateral mass screw system , posterior cervical system lateral mass screw 3.5mm ,various length,titanium , posterior cervical system lateral mass rod,titanium , pedicle screw system for cervical spine , pedicle screw for cervical spine 3.5 mm,various length,titanium , pediclescrew rodfor cervical spine,titanium , occipito cervical fixation rod plate system,small,titanium , occipito cervical fixation rod plate system, medium ,titanium , occipito cervical fixation rod plate system,large,titanium , trans articular odontoid cannulated screws, all sizes,titanium , pedicle screws system for dorso lumber spine , pedicle screws 4.5,5.5,6.5,7.5mm(monoaxial),titanium , pedicle screws 4.5,5.5,6.5,7.5mm(polyaxial),titanium , pedicle screw rod,titanium , transverse connector,titanium , pedicle hook,titanium , sub laminar hook,titanium , facet hook,titanium , percutaneus cannulated pedicle screw system , percutaneus cannulated pedicle screw 4.5,5.5,6.5,7.5 mm ,titanium , percutaneus cannulated pedicle screws corresponding rod ,titanium , pedicle screw with break off plug system , pedicle screw with break off plug , size 4.5, 5.5,6.5,7.5 dia. length 20 70 mm ,titanium , pedicle screw with break off plug corresponding rod, titanium , hydroxy appetite(ha ) coated pedicle screw system , hydroxy appetite(ha ) coated pedicle screw 4.5,5.5,6.5,7.5 mm, titanium , hydroxy appetite(ha ) coated pedicle screw corresponding rod,titanium , co cr pedicle screw system , poly axial co cr pedicle screw with break off, size 4 6.5mm,l 25 50mm , co cr connecting rod 4.75mm straight and pre band, various length , reduction screws with break off plug system for spondyloslithesis , reduction screws with break off plug for spondyloslithesis , titanium , pedicle screws 4.5,5.5,6.5,7.5 mm(polyaxial),titanium , corresponding rod for reduction screws with break off plug ,titanium , fenestrated pedicle screw system , fenestrated pedicle screw for bone cement augmentation size 4.5,5.5,6.5,7.5 mm, titanium , corresponding rod for fenestrated pedicle screw., titanium , fenestrated pedicle screw system with break off , fenestrated pedicle screw with break off for bone cement augmentation size 4.5,5.5,6.5,7.5 mm, titanium , corresponding rod for fenestrated pedicle screw, titanium , transformal lumber inter body fusion(tlif)peek cage size 26 mm, height 7 – 15mm , transformal lumber inter body fusion(tlif)peek cage size 28 mm, height 7 – 16mm , transformal lumber inter body fusion(tlif) inter vertibral rotatable peek cagesi ze 26 mm, height 7 15 mm , transformal lumber inter body fusion(tlif) inter vertibral rotatable peek cagesi ze 28 mm, height 7 15 mm , posterior lumber inter body fusion (plif) bullet shaped peek cage height 8 14 mm , expandable peek cages with rachet system for cervical spine , expandable peek cages with rachet system for dorsal spine , expandable peek cages with rachet system for lumber spine , expandable peek cages with pre lardotic curvature of 6° 12° ,various sizes for lumbar spine , inter laminar peek spacer all sizes , inter laminar titanium spacer all sizes , vertebral staple, single hole 5.5,6.5,7.5mm dia. , vertebral staple, double hole 12,13,14,15mm dia. , burr tip for spine surgery ,various sizes & shapes , cobbs elevator for spine surgery,small , cobbs elevator for spine surgery,medium , cobbs elevator for spine surgery,large , vertebro plasty kitkit should have(1)low viscosity bone cement(25 gm)(2)cement delivery system consists of one pressurizer,syringe, connector , suction cannula,cement mixing bowl and spatula and vertibral body puncture needle 3mm x100mm & 150 mm. , kypho plasty kit with two balloons (digital)kit should have digital device to inflate balloon showing pressure in psi & atm.,inflatable balloon should bear pressure up to 400 psi. , hart schill spine system , hart schill sizes 100mm,125mm,150mm,200mm,250mm , sub laminar cable wire , bone morphogenic protein(human rh bmp2),ultra small 1 2cc , bone morphogenic protein(human rh bmp2),small 2.1 3cc , bone morphogenic protein(human rh bmp2),medium 3.1 5cc , bone morphogenic protein(human rh bmp2),large 5.1 8cc , acl reconstruction set (us fda approved) , acl tibial tunnel guide system for acl reconstruction (should have locking system with variable angle adjustment form 35 to 60°) , cannulated flower tip drill bit with laser marking for calculation of bone tunnellength for acl reconstruction.size 5 11 mm , femoral off set guide for 0 8 mm , drill tip graft passing pin 2.4 mm. , drilling wire 2.4 mm. , graft preparation board. , tedon stripper,7 mm dia.,close end , tedon stripper,7 mm dia.,open end , thickness tester , bio screw driver. , pcl reconstruction set (us fda approved) , pcl tibial tunnel guide system for pcl reconstruction (should have locking system with variable angle adjustment form 35° to 60°) , femoral targetting device from outside in for pcl reconstruction , femoral targetting device from inside out for pcl reconstruction , tibial targetting device for pcl reconstruction , fat capture for pcl reconstruction , stainless steelcannulated interference screws dia. 7 10mm, l 20mm,25mm,30mm , titanium cannulated interference screws dia. 7 10 mm, l 20mm ,25mm,30mm , titanium cannulated interference screws with reverse threaddia. 7 10 mm, l 20mm ,25mm,30mm , titanium with rounded thread soft cannulated interference screws dia. 7 10 mm,l 20mm,25mm,30mm , bio composite interference screw size: 7 11mm, l 20 30mm , bio composite interference screw with reverse thread size: 7 11mm, l 20 30mm , ha coated interference screw size: 7 11mm, l 20 30mm , peek interference screw size:7 11mm, l 20 30mm , tibial bioabsorbale interference screw with proximal slop to flush fix in anterior tibial cortex size 7 11mm, l 20 30mm , aclsheath fixation set , acl femoral fixation sheath with screw for tendon graft fixation, various sizes , acl tibial fixation sheath with screw for tendon graft fixation, various sizes , acl femoral fixation device(metal pin), 15mm cortical length,l40mm , acl femoral fixation device (bioabsorbablepin ,various sizes) , button for lateral cortical femoral fixation , button along with loop for acl reconstruction, various sizes , acl suture button with flexible loop for lateral femoral fixation, various sizes. , acl suture button with continuous loop for lateral femoral fixation, various sizes. , acl suture button with continuous loop with unbraided polyster suture for lateral femoral fixation, various sizes. , acl reconstruction button along with loop & pre loaded with passing suture , l 15 35 mm , acl fixation button for femoral fixation without loop size:7mm,8mm,9mm,10mm,titanium , acl fixation button for femoral fixation with 2 accessory sutures with adjustable loop system, titanium , ligament staple in dia. 8 11 mm , suture post (flat head screw) sizes 4.5x (25 50) mm ,titanium , meniscal repair system of meniscal tear(disposable) , meniscal repair system all inside with 360° reach for meniscal tear(disposable) , meniscal needle with continuous fibre wire needle , drainage/irrigation needle for knee arthroscopy , shoulder cannula disposable, all sizes , shoulder cannula reusable, all sizes , shoulder cannula threaded, all sizes , shoulder cannula threaded, flexible, all sizes , 1.7mm all suture anchor with dura braid ,double loaded , 1.9mm anchor with #2 suture with handle ,titanium , 2.7mm anchor with #2 suture with handle ,titanium , 2.8mm anchor with #2 suture with handle, titanium , 3mm anchor with #2 suture with handle ,titanium , 3.5mm anchor with #2 suture with handle ,titanium , 5mm suture anchor with #2 polyester suture ,titanium , 5.5mm fully threaded anchor #2 suture ,titanium , 3mm knotted bio absorbable anchor , 2.3mm knotless bio absorbable anchor with pre loaded single ultra high molecular weight polyethylene braided fibre , 2.9mm knotless bio absorbable anchor , 2.3 mm knotlesspeek anchor , 2.9 mm knotlesspeek anchor , 2.9 mm knotlesspeek anchor with suture retenting , 3.5 mm knotless bio absorbable anchor , 3.5 mm knotless peek anchor , 4.5mm peek screw anchor, pre loaded at distal end of anchor with double ultra high molecular weight polyethylene braided fibre , 5.5mm peek screw anchor, pre loaded at distal end of anchor with triple ultra high molecular weight polyethylene braided fibre , all peek anchor for double & single row cuff repair. dia 4.5mm , all peek anchor for double & single row cuff repair. dia 5.5mm , all peek anchor for double & single row cuff repair. dia 6.5mm , suture passer 45°, left and right , suture passer 90°, left and right , suture shuttle needle , uhmw # 2 number white/colouredsuture with needles , uhmw # 2 number strippedcolour suture with needles , 4.7mm suture anchor with ultratape for bone in growth potential (plga,btcp & cs) , suture grasper with ratchet to pull tissue into anatomical position , acromio clavicular joint dislocation repair system having button on one side & suture disc on other side ,connected with suture wire , normal saline 3 litrepack , disposable radio frequency ablation probe (different angle) for arthroscopy,(quote rate only for one radio frequency ablation probe, machine/generator to be provided by company free of cost for ablation probe use for surgery) , fumigation box for arthoscope with two partition trays size 65x20x20cm , fumigation box for drill machine with single partition tray size65x20x20cm , wide biter punch with 3.4mm straight shaft,  straight tip , wide biter punch with 3.4mm straight shaft, 15degree up tip , wide biter punch 3.4mm  diameter, left shaft  30 deg with straight tip , wide biter punch  3.4mm diameter ,right shaft 30 deg ,straight tip , medium punch with 3.4mm straight shaft,  straight tip , medium punch with 3.4mm straight shaft, 15degree up tip , medium  punch 3.4mm  diameter, left shaft  30 deg with straight tip , medium punch  3.4mm diameter ,right shaft 30 deg and  straight tip , narrow punch with 3.4mm straight shaft,  straight tip , narrow  punch with 3.4mm straight shaft, 15degree up tip , scissor with 3.4 mm shaft diameter, straight with serrated tooth , probe hook 150mm shaft 3.4mm tip with 5mm markings , grasper blunt with 4.2 mm diameter, straight shaft with hook tip , osteochondral graft harvest and transfer set for different sizes (6 mm, 8 mm , 10 mm) , sterile kit for bone marrow aspirate concentrate , sterile kit for platet rich plasma (prp) generation , fibre wire no 2 , fibre wire no 5 , mpfl reconstruction kit , ac joint reconstruction kit , mersilene tape in sterile packaging , titaniun suture disk for arthroscopy surgery , titanium spiked bone staple for arthroscopic surgery , titanium spiked washe with screwr for arthroscopic surgery , single use hip arthroscopy kit , arthroscopy kit for carpal tunnel release , shoulder arthroscopy instruments , suture retriever with 3.4mm shaft diameter, uniquely designed atraumatic tip , shoulder debridement rasp , soft cuff grasperwith low profile 4 mm tip for open/arthroscopic procedures , shoulder tissue elevator – 30degree , glenoid rasp , spear with obturator 1 no each. , bird beak suture retriever 22degree up , crochet hook for sutures management , switching stick extra long 4 mm , reusable obturator for 8 8.25mm and 6mm cannula , suture cutter4.2 mm, closed ended with feature of leaving 3mm tail without chance of cutting knot , cannulatranslucent 8.25mm , cannulas translucent 6mm , knot pusher with outer sleeve , single hole knot pusher , hook probe, 5.4mm , multi functional suture passer device with side loading suture mechanism & window trap mechanism , suture passing needles , sterilization case for shoulder instruments , disposable lasso suture passer with nitinol loop 45 degree right and left , disposable lasso suture passer with nitinol loop 90 degree right and left , floor suction disc for arthroscopy , arthroscope , 4mm, 30 degree high definition wide angled autoclavable arthroscope with scratch resistant tip and stainless steel shaft , two valve  rotatable outer sheath compatible for 4mm arthroscope with blunt trocar and blunt obturator , 2.7 mm , 30 degree high definition wide angled autoclavable arthroscope with scratch resistant tip and stainless steel shaft , two valve  rotatable outer sheath compatible for 2.7mm arthroscope with blunt trocar and blunt obturator , 4mm, 90 degree high definition wide angled autoclavable arthroscope with scratch resistant tip and stainless steel shaft , two valve  rotatable outer sheath compatible for 4mm , 90 degree arthroscope with blunt trocar and blunt obturator , bone cement with low viscosity , 20g , bone cement with medium viscosity, 20g , bone cement with high viscosity , 20g , bone cement with low viscosity , 40g , bone cement with medium viscosity ,40g , bone cement with high viscosity, 40g , bone cement with gentamycin, low viscosity , 20g , bone cement with gentamycin, medium viscosity, 20g , bone cement with gentamycin, high viscosity, 20g , bone cement with gentamycin, low viscosity, 40g , bone cement with gentamycin,medium viscosity, 40g , bone cement with gentamycin,high viscosity, 40g , bone cement with gentamycin + clindamycin, 40g , bone cement with gentamycin + vancomycin,40g , bone cement with tobramycin, 40g , bone cement with colistin + erythromycin, 20g , bone cement with colistin + erythromycin, 40g , bone cement mixing bowl with spatula,ss , disposable cementgun , re usable cement gun set, (autoclavable) , re usable cement gun , accessories for cement gun , re usable vacuum mixing cement gun set, (autoclavable) , re usable cement gun , accessories for vacuum mixing cement gun , vacuum pump , gentamycincement beads 3to5mm dia. (10 beads) , gentamycincement beads 3to5mm dia.(30 beads) , gentamycincement beads 7to9mm dia. (10 beads) , gentamycincement beads 7to9mm dia. (30 beads) , a m prosthesis 37mm to 57 mm with 2 mm increment , fixed bipolar head with fenestrated femoral stem small/medium/large,ss , bipolar hip prothesis (talwarkar type) 37mm to 57mm with 2mm increment , press fit uncemented modular bi polar prosthesis for hip salvage procedure , bi polar acetabular cup,all sizes , head with various neck length,all sizes , ha coated femoral stem ,various sizes , cemented bipolar hip prosthesis set , bipolar hip prosthesis (modular type)cobalt chrome cup &head various sizes with variousneck length , bipolar hip prosthesis (modular type) femoral stem various sizes,cemented , cement restrictor , stem centralizer , non cemented bipolar hip prosthesis set , non cemented bipolar hip prosthesis (modular type)cup &head various sizes with various neck length , non cemented bipolar hip prosthesis (modular type) ha coated femoral stemvarious sizes , non cemented bipolar hip prosthesis set , non cemented bipolar hip prosthesis (modular type)cup &head varioussizeswith various size neck length , non cemented bipolar hip prosthesis (modular type) porous coated femoral stem various sizes , basic cemented total hip system , total hip acetabular cups various sizes , total hip metal head various sizes with various neck length , femoral stem various sizes , stem centralizer , cement restrictor , basic cemented total hip system with lpw (us fda approved) , modular stem (stainless steel) small,medium,large,double tappered,highlypolished,collar less,self centering, variable offsets. , modular internal head,various sizes,stainless steel with various neck length. , modular thr 10° acetabular cup with lpw , stem centralizer , cement restrictor , hybrid total hip replacement set (us fda approved) , cemented modular stem: (stainless steel) small,medium,large,double tappered,highly polished,collar less,self centering,variable offsets. , modular internal head: various sizes,stainless steel with various neck length. , cementless acetabular cup: ha coated with option of screws , acetabular highly crosslink poly cup liner: different sizes , stem centralizer , cement restrictor , cancellous screws for acetabular cup , basic cementless hip system , cementless hip system fully ha coated titanium alloy femoral stem with varioussizes , cementless hip system metal head 28 mm with variable neck length , cementless hip system acetabular cup cementlesshacoated with option ofscrews , cementless hip system acetabular highly crosslink poly cup liner different sizes , bone screw tofix the cup , basic cementless hip system , cementless hip system porous coated titanium alloy femoral stem with varioussizes , cementless hip system metal head 28 mm with variable neck length , cementless hip system acetabular cup cementlessporocoated with option ofscrews , cementless hip system acetabular highly crosslink poly cup liner with 10°lpw different sizes , bone screw tofix the cup , basic cementless hip system , cementless hip systemha coated titanium alloy femoral stem(double tappered) various sizes , cementless hip system metal head 28mm with variable neck length , cementless hip system acetabular cup cementless ha coated with option ofscrews , cementless hip system acetabular highly crosslink poly cup liner different sizes , bone screw tofix the cup , versatile cemented/uncemented thr ( us fda approved) having same instrument for cemented and uncemented stems(metal head) , femoral stem: cemented cocr stem size 10 16mm , femoral stem :uncemented cocr stem size 8 16mm with proximal plasma poro coating , femoral head:28 32mm metal head , acetabular cup:plasma fit, all sizes , acetabular highly crosslinked polycup:all sizes , bone screws to fix the cup , versatile cemented/uncemented thr ( us fda approved) having same instrument for cemented and uncemented stems (ceramic head) , femoral stem: cemented cocr stem size 10 16mm , femoral stem :uncemented cocr stem size 8 16mm with proximal plasma poro coating , femoral head:28mm,32mm,36mm,ceramic head (biolox delta) , acetabular cup:plasma fit, all sizes , acetabular highly crosslinked polycup:all sizes , bone screws to fix the cup , advanced cementless hip system , cementless hip system, ha coated femoral stem,various sizes , cementless hip system metal head 32mm,36 mm with variable neck length , cementless hip system acetabular cup , ha coated with option of screws,should accomodate 32mm,36 mm head with same cup , cementless hip system acetabular highly crosslink polycupliner different sizes,shouldaccommodate 32mm,36mm head , bone screw tofix the cup , advanced cementless hip system , cementless hip system ha coated femoral stem,different sizes , cementless hip system ceramic head 32mm,36 mm with variable neck length , cementless hip system acetabular cup ha coated with option of screws,should accomodate 32mm,36 mm head with same cup , cementless hip system acetabular highly crosslinkpoly cup liner different sizes,should accommodate 32mm,36mm head , bone screw tofix the cup , advanced cementless hip system , cementless hip system ha coated femoral stem,different sizes , cementless hip system ceramic head(bilox delta) 32mm,36 mm with variable necklength , cementless hip system acetabular cup ha coated with option of screws,should accomodate 32mm,36 mm head with same cup , cementless hip system acetabular ceramic liner(bilox delta),should accommodate 32mm,36mm head , bone screw to fix the cup , high performance cementless hip system , primary femoral stem:non cemented primary femoraltapered short,rounded tipped short stem made of titanium alloy porocoated with layer of ha allowing preservation offemoral neck , non cementedacetabular cup:noncementedhemispherical acetabular cup made of titanium alloy with peripheral anti rotation fins with inbuilt ceramic liner made of zirconia & alumina, with different diameters , ceramic femoral head for cup:ceramic femoral headwith various sizes , femoral adaptor sleeve: femoral adaptor sleeve made of titanium alloy withclean taper fit and compatible with the inner ceramic taper of the femoral head with different sizes , advance cementless hip system (us fda approved) , acetabular cup of various sizes with dual mobility and additional fixation of screws in acetabular cup , metal head: various sizes , femoral stem: ha coated,various sizes , screws for cup fixation , advance cementless hip system ( us fda approved) , acetabular cup of various sizes with dual mobility and additional fixation of screws in acetabular cup , head ceramic : various sizes , femoral stem ha coated:various sizes , screws for cup fixation , high performance cementless hip system , uncemented femoral stem: uncemented primary femoraltapered blade style stem made of titanium alloy with poro coating with high friction titanium coating, with anterior & posterior longitudinal flute, should be proximal femoral bone preserving , bilox delta ceramic head: 32mm,36mm with variable neck length , uncemented hip system acetabular cup ha/poro coated with option of screws, should accomodate 32mm,36mm head with same cup , uncemented hip system acetabular highly crosslinkpoly cup liner with 10° lpw ,various sizes, shouldaccommodate 32mm,36mm head , bone screw tofix the cup , high performance cementless hip system , uncemented hip system ha coated femoral stem,various sizes. , bilox delta ceramichead: 32mm,36 mm with variable neck length. , uncemented trabecular metal cup different sizes accommodate large head withscrew option. , uncemented hip system acetabular highly crosslink polycup liner with 10° lpw ,various sizes,shouldaccommodate 32mm,36mm head. , bone screw tofix the cup. , high performance cementless hip system , uncemented femoral stem,proximal sleeve,femoral head femoral head: 36mm ceremic head of alumina & zerconia with different neck lengthstem:non cemented proximal loading option titanium alloy, tapered with coronal slot & distal flutes ,variable neck length diameter & offsetsleeve:poro coated proximal femoral sleeve with locking mechanism with femoral stem ,various sizes , non cemented titanium acetabular cup with gription poro coating with lockingmechanism for liner,various sizes with screw locking option , highly crosslink poly cup liner with 10° lpw different sizes,should accommodate 32mm,36mm head , bone screw tofix the cup , revision cemented hip system , cemented longstem ,various sizes & offsets , acetabular cup with lpw , large diameterhead 32mm,36mm , stem centralizer , cement restrictor , revision cementless hip system , revision uncemented acetabular cup :multi hole titanium alloy actebular shells with a full 180° hemisphere poro coated withoption of multiple screw holes forfixation withoptions to fit all liners (metal,ceramic & poly) of various sizes , revisionacetabular screw:5.5mm titanium alloy acetabular revision screws forperipheral area of cup in various sizes , titanium cancellous screw 6.5 mm self tapping for use in central area of the cup , uncemented hip system acetabular highly crosslinkpoly cup liner with 10° lpw ,various sizes,shouldaccommodate 32,36 head. , ceramic femoral head for cup: ceramic femoral head made of alumina & zirconia with various sizes. , distally interlocked femoral reconstruction revision hip system ha coated distal locking option with various diameter & length with the provision of reconstruction of trochanter & cerclage cable hole. , distal interlocked screw titanium distal locking self tapping various sizes. , cementless acetabular reconstruction system , acetabular reconstruction system acetabular reconstruction titanium ring with ha coated acetabular shell with option of multiple central & peripheral screws with corresponding screws(8 screws) , posteriorly lipped highly crosslinked poly liner various sizes , bilox delta ceramic femoral head for cup, various sizes , femoral revision system distally fixed revision femoral stem, porous coated with calcar replacement options,different diameter , revision cementless hip system (us fda approved) , cementless fluted distal femoral fixation stem,all sizes and diameters (titanium) , ha coated cone body ,proximal part, all sizes and with independent version between cone body and stem , metal headwith 32mm,36mm with various neck length , ceramic headwith 32mm,36mm with various neck length , highly crosslink polycup liner, different sizes to accommodate 28 36mm head , acetabular cup with ha coated with option of screws to accommodate 32 36mm head with same cup , acetabular mesh,ss (us fda approved) , acetabular mesh,titanium(us fda approved) , femoral mesh,titanium(us fda approved) , acetabular cage, various sizes,titanium(us fda approved) , trabecular acetabular augments,various sizes , trabecular acetabular restrictor,various sizes , trabecular acetabular screws,various sizes , uni condylar mobile knee system consisting of femoral components, tibial inserts & tibial tray of various sizes. , basic tkr (us fda approved) , femoral component ,co cr,various sizes , tibial component, titanium,various sizes , tibial insert, various sizes , patellar button, various sizes , basic tkr pcl sacrificing(us fda approved) , femoral component ,co cr,various sizes , tibial component, co cr, various sizes , tibial insert, various sizes , patellar button, various sizes , total condylar, pcl substituting ,fixed bearing / mobile bearing with the provision of high flex knee system , femoral componentco cr all sizes , tibial component co cr all sizes , tibial insert all sizes , patellar button all sizes , cruciate retaining high flexion knee system , femoral component co cr all sizes , tibial tray cocrall sizes , highly cross linked poly insert all sizes , patellar button all sizes , advanced knee system , posterior stabilized fixed bearing femoral components with ability to attach extender stems , highly crosslinked poly insert with locking mechanism ,with option of both cruciate substituting and retaining various sizes , co cr tibial tray with ability to attach extention stem ,various sizes , patella along with three pegs , patient specific total knee prosthesis (us fda approved): consists of femoral component tibial component tibial insertthe tkr design should be patient s own ct or mri based ,the mechanical based alignment to be matchedwith patients own mechanical axis,the cutting block must provide patients own should have faster turn around time(less than 6 weeks). , revision knee system(us fda approved) , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of metal augments & offset extension stem , femoral metal augment for distal & posterior femur,various sizes , femoral extension stem,various offset & sizes , tibial component with ability to accept varoius sizes tibial augmentation blocks , wedges & extension stem . , semi constraint tibial knee inserts all sizes , metal tibial wages step,hemi & full of various sizes and thickness , tibial extension stem various offset & sizes , semi constraint total knee prosthesis system (us fda approved) , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of poro coated metaphyseal sleeves & offset extension stem , metaphyseal porocoated femoral sleeves,various sizes , femoral extension stem,various offset & sizes , semi constraint mobile bearing tibial knee inserts,all sizes , tibial component mobile bearing tray with ability to accept varoius sizes poro coated metaphyseal sleeves & extension stem , metaphyseal porocoated tibial sleeves,various sizes. , tibial extension stem various offset & sizes cable wiring system for periprosthetic fractures , advance modular tkr (us fda approved) , femoral component cocr for more than 10 sizes compatible with ps & pr , tibial insert :three typesi.e.ps,dd &uc (ultracoagulant) , tibial component cocr for more than 10 sizes with option of increase pa tibial diameter , patellar button all sizes , highly advance modular tkr (us fda approved) with option of rotating plateform/fixed bearing with high flexion knee , femoral component cocr for more than 10 sizes compatible with ps & pr , tibial insert with 1mm increment for common sizes and 2mm increment for uncommon sizes with anti oxidant properties , tibial component cocr 10 sizes , patellar button with anti oxidant properties all sizes , cable wiring system,ss (us fda approved) , cable wire with sleeves,ss , sleeve for cable wire,ss , cable wiring system,co cr (us fda approved) , cable wire with sleeves,co cr , sleeve for cable wire,co cr , neer prosthesis fixed shoulder various sizes. , modular hemi shoulder set cemented (us fda approved) , hemi shoulder stem cemented,co cr , hemi shoulder humeral head all sizes , modular hemi shoulder set uncemented (us fda approved) , hemi shoulder stem uncemented, co cr , hemi shoulder humeral head all sizes , total shoulder replacement prosthesis system cemented (us fda approved) , total shoulder humeral stem with holes in fins for muscle and soft tissue reconstruction cemented , humeral head all sizes , glenoid prosthesis crosslinked poly. , total shoulder replacement prosthesis system uncemented (us fda approved) , total shoulder humeral stem with holes in fins for muscle and soft tissue reconstruction uncemented , humeral head all sizes , glenoid prosthesis crosslinked poly. , reverse shoulder prosthesis system , cemented humeral stem with 0° 10° retroversion,co cr , non cemented humeral stem with 0° 10° retroversion,co cr , high mobility humeral polythelene cup , glenoid implant with fixation screws , locking/non locking fixation screws , cemented total elbow implant with accessories , humeral component,various sizes , ulna component,various sizes , uncemented total elbow implant with accessories , humeral component various sizes , ulna component various sizes , radial head replacement prosthesis set , all sizes , radial head prosthesis , stem all sizes , ankle joint replacement prosthesis set , pulse lavage wound debridement system: (disposable battery operated with concurrent suction and fan spray tip) , proximal femur resection modular hip prosthesis set , stem:with fixed length of 120 mm with dia. 10 mm ,11 mm and 12 mm , spacer: dia. 24 mm with length sizes 50 100 mm with increment of 10 mm , half cup assembly: 40 54 mm dia.(increment of 2 mm) , taper head:taper of 12/14 mm with fixed length of 100 mm , head: 24 mm and 28 mm dia. with neck length of 3 mm,0 mm,+4 mm and +8mm , distal femur resection modular knee prosthesis set(the tapered stick of stem is inserted in the tapered groove of spacer which is fitted with the tibial femoral hinge) , tibial femoral hinge: should consists of femoral condyle and tibial plateform with stem joined with a pin,size constant,length of femoral condyle 80 mm , stem:10 mm,11 mm,12 mm dia., l 120 mm , spacer:24 mm dia.,l 50 100 mm(increment of 10mm) , proximal tibial resection modular knee prosthesisset(the tapered stick of stem is inserted in the tapered groove of spacer which is fitted with the tibial femoral hinge) , stem: 10mm ,11mm and 12mm dia.,with fixed length of 120mm , spacer: dia. 24 mm, l 50 100 mm(increment of 10mm) , tibial femoral hinge:tibial condyle with a length of 65mm,it make a hinge by joining with an internally fitted box type condyle with stem through a pin , indigenous modular/proximal humerous resection shoulder prosthesis set(half head to fitted on the top of 12/14 mm tapered head ,the bottom portion of the tapered head is inserted into spacer which is fitted in the top of tapered stick of stem to make a complete prosthesis) , stem: 7mm,8mm and 9mm dia.,l 75mm , spacer:l 25mm,40mm,60mm,80mm,100mm , taper head:with a head of 12/14mm taper, standard length of 60mm , half head:33mm,35mm,37mm,39mm,41mm and 43mm dia. , elbow prosthesis set , stem:7mm,8mm and 9mm dia.,l 75mm , spacer:l 20 100mm(increment of 20mm) , elbow hinge with ulna stem:standardsize , humeral tumor prosthesis( us fda approved): humeral head with porous coating with different diameter,extension piece should have male/female tapering for different anatomy with different lengths & humeral stem should have differentlength and diameter. , proximal tibia tumor prosthesis( us fda approved) set consisting of femoral component,tibial component,articulating mechanism,articular surface,extension piece and intramedullary stem .(proximal tibial component should have male/female tapering to address different patient profile,whole assembly must work as rotating hinge for better patient outcome,femoral component should have option of femoral stem, distal wedge ,femoral component should have different sizes with address different anatomy(male/female),intramedillary stem should have straight/bowed option for different anatomy & should also have option of with and without body option,tibial insert should have different thickness option (10 24 mm)) , distal femur tumor prosthesis( us fda approved): distal femoral component should have male/female tapering with left/right option, whole assembly must work as rotating hinge to address different patient need,should have extension piece option(30 200 mm) to manage resection of distal femur,intramedillary stem should have straight/ bowed option for different anatomy,intramedillary stem should have option of with and without body option,should have different tibia sizes to address different anatomy,should have bumper option toavoid anterior sublaxtion,should have option of tibial stem with different diameter and insert with different thickness , proximal femur tumor prosthesis( us fda approved): should have proximal femoral component with and without trochanteric option with porous body for osteo integration,different extension piece(30 200 mm) to address resectionlength,intramedillary stem should have straight/ bowed option for different anatomy, intramedillary stem should have option of with and without body option , pre sterile disposable ortho suction canulawith bone filter , single use, , pre sterile disposable ortho suction canulawith bone filter single use for spine surgery , antibiotic spacers mould for infected hip joint(thr) ,all sizes, disposable , antibiotic spacers mould for infected knee joint(tkr) ,all sizes, disposable , antibiotic spacers for hip joint(high resistance bone cement body loaded with anti biotic),all sizes , antibiotic spacers for knee joint ,all sizes...

Chaudhary Devi Lal University - Haryana

27571486 writing the name of university with 5 mm thick acrylic letters ( 450mm height) with plain acp sheet base & aluminum frame on main gate towards court side at cdlu, sirsa....

Private Company - Haryana

27196819 auction sale of products scrap of production cardboards , scrap of cardboard , wood pallets /base /wooden box sides solid wood batons , packing wood with ply and batons /wood with rough surface /damaged wood and ply hardboard , mix scrap of rejected mutilated components ,scrap of used . damaged silencer , scrap filter , mix scrap , old used rejected grinding wheels , used/scrap broken glass , industrial waste , scrap dry mixed metal dust , mixed scrap of used . damaged mechanical items , scrap of heavy melting scrap , scrap of desiccant ,scrap nonferrous items , scrap of iron steel , scrap copper cables , scrap hazardous drums all types and sizes , scrap of used /obsolete pp corrugated sheets of imm , scrap of it waste , scrap of it waste , water purifier , obsolete television with acc of jps ,refrigerators , assets vacuum cleaner with accessories , heater chamber and steam coil of top coat oven on pne , scrap of copper , obsolete cooling pads with aluminum frame , scrap of iron and steel slitted coils g ,furniture items sofa set , book and shoes rack , double bed , study centre and dining table with chair and book case of jps , scrap of mix copper , scrap of iron and steel , obsolete force gauge , jigs , dummy die with accessories , scrap of non ferrous items , scrap of ss304 , scrap hot die steel , ...

Private Company - Haryana

27196790 auction sale of products scrap of production cardboards , scrap of cardboard , wood pallets /base /wooden box sides solid wood batons , packing wood with ply and batons /wood with rough surface /damaged wood and ply hardboard , mix scrap of rejected mutilated components ,scrap of used . damaged silencer , scrap filter , mix scrap , old used rejected grinding wheels , used/scrap broken glass , industrial waste , scrap dry mixed metal dust , mixed scrap of used . damaged mechanical items , scrap of heavy melting scrap , scrap of desiccant ,scrap nonferrous items , scrap of iron steel , scrap copper cables , scrap hazardous drums all types and sizes , scrap of used /obsolete pp corrugated sheets of imm , scrap of it waste , scrap of it waste , water purifier , obsolete television with acc of jps ,refrigerators , assets vacuum cleaner with accessories , heater chamber and steam coil of top coat oven on pne , scrap of copper , obsolete cooling pads with aluminum frame , scrap of iron and steel slitted coils g ,furniture items sofa set , book and shoes rack , double bed , study centre and dining table with chair and book case of jps , scrap of mix copper , scrap of iron and steel , obsolete force gauge , jigs , dummy die with accessories , scrap of non ferrous items , scrap of ss304 , scrap hot die steel , ...

Department Of Technical Education - Haryana

27097102 supply of equipment / it products / learning materials and accessories at giti, kurukshetra under strive project. 1 white board, markers and eraser, specifications :top writing layer is imported ceramic coated steel scratch resistant longest life, comes with anodized aluminum frame and abs corners, most premium writing surface ultra white smooth satin finish, scratch resistant , chemical resistant , fire resistant , ceramic coated board has a much longer life superior erasability breakage free packaging, comes with wall hanging hooks for vertical or horizontal hanging. size : 5 x 4 2 projector, specifications: viewing movies & presentation, one chip dlp, native resolution 1280 x 720 ( hd ) , brightness 250 lumens, standard throw ( 0.91 to 2.5 ) , light source led, light source life of 30000 hrs., hdmi port, usb a, audio out port, media storage port, on site warranty 3 years 3 projector screen, specifications :automatic motorized projector screen, 100 inches diagonal in 16:09 wide format, ultra hd, active3d, 4k technology ( white ) , motorized projector screen 120 140 inches diagonal in 16:09 wide format with radio frequency remote controlled set, imported matte white finish 1.2 gain projection fabric material with black backing for superior color reproduction and 4 side black masking border for absorb extra light falling, easy clean washable projection fabric surface with anti uv coated for protect your eyes while viewing movies & presentation, support 1080p, ultra hd, 3d active & 4k technology, fitted with life time lubricated motor for silent and noise free operation, comes with radio frequency cordless remote. 4 flip chart with markers, specifications: calendar type spiral bound paper sheets for conferences, meeting & teaching purposes ( sheets size: 20 x 30 ) , made of high bright, white paper and is perfect to use with pens, pencils, crayon, markers etc, perfect light square ruling, excellent craftsmanship, fits to all type of flip chart boards, 25 sheets pack, pack of 2 roll with pack of assorted permanent markers. 5 intel core i5 15.6 inch laptop ( windows 10 professional ) , specifications:15.6 fhd ( 1920x1080 ) tn anti glare / i5 10210u / 8gb ram / 1tb sata / wlan intel ax201 2x2ax+bt / hd720p camera / finger print reader / enabled discrete tpm 2.0 / win10 professional / 3 years onsite / 45whr battery / 1 usb 2.0, 3usb 3.1, 1usb type c / 1 hdmi port / discrete tpm / stereo speakers, 2w x2 / make in india laptop hp / dell / lenovo 6 supporting software / applications for projecting audio, video, recording, make:standard quality 7 presentation tools to support learning activities: intranet, email, ims, learning management system e.g. moodle, blackboard to enable blended learning , make: standard quality 8 microphone / voice system for lecture and class activities , specifications: portable pa neckband system nba 20dp rechargeable with 1 neckband mic with usb and sd card input, elegant and compact ultra portable pa amplifier with max. output power of 12w, built in mp3 digital player for playback of music through a usb drive or a tf card; the unit can be used while hanging on the shoulder or by putting around the neck, 3.5mm mic input socket for connecting the headband microphone and 3.5mm line input socket for connecting a dvd cd or an mp3 player, 9 handy camera, specifications: innovative polycom studio: audio / video usb sound bar, with auto track 120 deg fov 4k camera, usb stereo speakerphone, bt speakerphone, wi fi device management, remote, cable: 5m usb type a to type c. 10 stationery kit – staples, glue, chart paper, sketch pens, paint box, scale, a4 sheets make: standard quality 11 desk top computer :intel core i3 9100 8 gb, 500 gb / 1tb hdd / windows 10 professional , specifications : twr , i3 10100 / 8 gb ram / 1tb_hd_7200rpm hard disk / kyb / mouse, lan / 2.m.2 slots / minimum 4 usb 3.1 ports / 1 dp / 1 vga / 1 hdmi / 1 microphone combo / min. 180w with 85% power supply / w10 pro / with 19.5 tft ips ( 1440 x 900 ) 3 years warranty hp / dell / lenovo 12 assessment and test tools for day to day online tests and assessments 13 computer chair , specifications: chair with ergonomic co polymer chair with black contoured mesh back, strong plastic armrest, heavy duty plastic umbrella shape base, pneumatic 5 inch seat height adjustment & 2 inch thick padded seat for day long comfort. 14 computer table, specifications: engineered wood computer table desk, product dimensions: length ( 40 inches ) breadth ( 16 inches ) height ( 28 inches ) , made of particle board ( high grade pre laminated engineering wood with natural wood grain finish. 15 reading resources: access to relevant sample documents and learning forums to enable self study before and after each training session. make:standard quality...

Chaudhary Ranbir Singh University - Haryana

25897412 annual rate contract for supply of sports its / dress / track suits / shoes & socks / towels / carrying bags and sports equipments etc. sports kits as kabaddi, kho kho, athletic, boxing, wrestling, football, volleyball, basketball, handball, fencing, water sports taekwondo, karate and cricket etc. nspecification: nlight weight workout tee for best performance, with climate cool and sweat absorbing technology. nsize: 38 nwith university insignia n 2 sports kits as kabaddi, kho kho, athletic, boxing, wrestling, football, volleyball, basketball, handball, fencing, water sports taekwondo, karate and cricket etc. nspecifications: nlight weight workout tee for best performance, with climate cool and sweat absorbing technology. nsize: 40 nwith university insignia n 3 sports kits as kabaddi, kho kho, athletic, boxing, wrestling, football, volleyball, basketball, handball, fencing, water sports taekwondo, karate and cricket etc. nspecifications: nlight weight workout tee for best performance, with climate cool and sweat absorbing technology. nsize: 42 nwith university insignia n 4 sports kits as kabaddi, kho kho, athletic, boxing, wrestling, football, volleyball, basketball, handball, fencing, water sports taekwondo, karate and cricket etc. nspecifications: nlight weight workout tee for best performance, with climate cool and sweat absorbing technology. nsize: 44 nwith university insignia n 5 tracksuits nwoven track jacket and bottom with thin inner mesh lining. contrast panels and stitched to details. ykk zippered pockets. nsize: 38 nwith university insignia n 6 tracksuits nwoven track jacket and bottom with thin inner mesh lining. contrast panels and stitched to details. ykk zippered pockets. nsize: 40 nwith university insignia n 7 tracksuits nwoven track jacket and bottom with thin inner mesh lining. contrast panels and stitched to details. ykk zippered pockets. nsize: 42 nwith university insignia n 8 tracksuits nwoven track jacket and bottom with thin inner mesh lining. contrast panels and stitched to details. ykk zippered pockets. nsize: 44 nwith university insignia n 9 shoes nspecifications: nsolid rubber outsole covers high impact zones for more durability and endurance nsize: 5 n 10 shoes nspecifications: nsolid rubber outsole covers high impact zones for more durability and endurance nsize: 6 n 11 shoes nspecifications: nsolid rubber outsole covers high impact zones for more durability and endurance nsize: 7 n 12 shoes nspecifications nsolid rubber outsole covers high impact zones for more durability and endurance nsize: 8 n 13 shoes nspecifications nsolid rubber outsole covers high impact zones for more durability and endurance nsize: 9 n 14 shoes nspecifications nsolid rubber outsole covers high impact zones for more durability and endurance nsize: 10 n 15 socks with university insignia nsuper soft synthetic fabric delivers comfort all day long, with sweat absorbent technology, that keeps feet dry n 16 carry bags ( for sports use ) with university insignia on the front side nsize ( h 24 cm x w 48 cm x d 24 cm ) nadjustable / convert able nmade of 100 o / o polyester , nzip main component , nventilated shoe pocket; zip pocket on end; three inside slip in pockets ; adjustable padded shoulder strap; air mesh padded carry handles; 3 stripes across top end; nscreen printed on side n 17 towels ( sports use ) with university insignia on the front side n30”x60” size in inches with softness and extra moisture absorbance n 18 hurdles, simple or steeple chase nspecification npowder coated steel / aluminum frame nknockdown components n 19 shot put nspecification nspecial stainless steel, lead filled shots. nturned to different diameters, to iaaf specifications n 20 discuss nspecifications nrubber fibre made unbreakable, durable with lightweight n 21 javelin ( mw ) nspecification n800g, 700g, 600g, 500g, 400g carbon fibre made javelin n 22 iron ring for shot put nspecification nas per iaaf rules n 23 iron ring for discuss nspecification nas per iaaf rules n 24 ball badminton racket nspecification nusually weights from 200 grams to 250 grams and 63 cms to 70 cms . the gutted elliptical area of the racket is 20 cms to 22 cm n 25 ball badminton ball nspecification na standard ball badminton racket usually weighs from 200 to 250 grams and is 63 to 70 cm in length. n 26 ball badminton pole set nspecification nmoveable and colour coated n 27 ball badminton net nspecification nmade up of top grade fibres and is woven in a grid like structure. the size of ball badminton net should be approved by ball badminton federation of india. n 28 badminton racket nspecification ngraphite composition with durability and low tension with multifilament strings n 29 lawn tennis racket nspecification ngraphite composition with standard size for professionals n 30 lawn tennis ball box nspecification npressurized tennis balls for professionals n 31 net ball nspecification nstandard size n 32 korfball ball nspecification nas per ikf approved n 33 korfball pole and net nspecification nas per ikf approved n 34 handball ( m&w ) nspecification nstandard size , hand stitched with good grip and firmness n 35 volleyball nspecification nas per vfi approved n 36 volleyball net with wire nspecification nportable, lightweight, durable and stable approved by vfi n 37 handball net nspecification nstandard size, lightweight, nylon material made n 38 baseball sluggers nspecification ngrade i quality, lightweight high grade aluminium alloy made n 39 base ball gloves nspecification npvc base ball gloves made from cotton and highly sweat absorbent material. n 40 baseball ball nspecification nmajor league use and full grain leather cover quality n 41 fencing set nspecification nffi approved as below n 42 electric foil complete nspecification nas per fencing federation of india approved n 43 elecric epee complete nspecification nfencing federation of india approved n 44 electric sabre s 2000 complete nspecification nffi approved n 45 practice foil comp nspecification nffi approved n 46 practice epee / sabre comp nspecification nffi approved n 47 electric foil blade complete nspecification nffi approved n 48 electric epee blade complete nspecification nffi approved n 49 sabre blade s 2000 nspecification nffi approved n 50 non electric foil blade metal point nspecification nffi approved n 51 non electric epee blade metal point nspecification nffi approved n 52 foil / e / s body wire colored / trans nspecification nffi approved n 53 foild sabre mask wire ( spiral / strt ) nspecification nffi approved n 54 epee mask 350n nspecification nffi approved n 55 foild sabre mask 350n nspecification nffi approved n 56 epee mask washable nspecification nffi approved n 57 foil / sabre mask washable nspecification nffi approved n 58 electric jacket foil nspecification nffi approved n 59 electric jacket sabre nspecification nffi approved n 60 electric jacket foilss washable nspecification nffi approved n 61 electric jacket sabre ss washable nspecification nffi approved n 62 3 weapon gloves nspecification nffi approved n 63 elec sabre gloves nspecification nffi approved n 64 fencing suit 3pc ce350 n nspecification nffi approved n 65 f / e weapon tester nspecification nffi approved n 66 full chest protector plastic m / w nspecification nffi approved n 67 adidas en grade fening shoes nspecification nffi approved n 68 masters jacket leather nspecification nffi approved n 69 masters arm leather nspecification nffi approved n 70 masters leg leather nspecification nffi approved n 71 masters gloves nspecification nffi approved n 72 masters mask with black bb nspecification nffi approved n 73 full arm 05 scoring m / c with score / time display, remote, millenium reels&floor / piste cables all in 02 carry cases nspecification nffi approved n 74 full arm 01 scoring m / c with millenium reels& floor / piste cables all in 02 carry cases nspecification nffi approved n 75 full arm 07 scoring m / c set nspecification nffi approved n 76 floor cable ( each ) millennium reels ( each ) nspecification nffi approved n 77 aluminium piste f / e 1.6mx1mx18m nspecification nffi approved n 78 aluminium piste 1.6mx1mx16m nspecification nffi approved n 79 foil bare blade vniti usa nspecification nffi approved n 80 epee bare blade vniti usa nspecification nffi approved n 81 all star sm blue blade wired fie foil nspecification nffi approved n 82 allstar sm blue blade wired fie epee nspecification nffi approved n 83 allstar blue blade sabre nspecification nffi approved n 84 foil mask fie nspecification nffi approved n 85 epee mask fie nspecification nffi approved n 86 sabre mask fie nspecification nffi approved n 87 fencing suit 3pc ce800n f / e nspecification nffi approved n 88 tool kit alstar nspecification nffi approved n 89 guitar shape kit bag ( carry ) nspecification nffi approved n 90 kit bag with wheels nspecification nffi approved n 91 electric foil blade complete ( colored blade ) nspecification nffi approved n 92 electric epee blade comp ( colored blade ) nspecification nffi approved n 93 sabre blade s 2000 ( colored blade ) nspecification nffi approved n 94 hockey set nspecification nas approved by hockey india n 95 hockey ball nspecification nas approved by hockey india n 96 goal post ( moveable ) nspecification nas approved by hockey india n 97 goal keeper kit nspecification nas approved by hockey india n 98 shin guard nspecification nas approved by hockey india n 99 hockey stick nspecification nas approved by hockey india n 100 gum shield nspecifications nas approved by hockey india n 101 hockey player goloves nspecifications nas approved by hockey india n 102 football nspecification n11 a size football n 103 cricket set / kit nspecification nas per bcci standard n 104 cricket bat nspecification nas per bcci standard n 105 ball nspecification nas per bcci standard n 106 batsman leg guard nspecification nas per bcci standard n 107 batting gloves nspecification nas per bcci standard n 108 wicket keeper leg guard nspecification nas per bcci standard n 109 wicket keeper ngloves nspecification nas per bcci standard n 110 helmet nspecification nas per bcci standard n 111 thigh pad nspecification nas per bcci standard n 112 abdomen guard nspecification nas per bcci standard n 113 stump nspecification nas per bcci standard n 114 cricket kit bag nspecification nas per bcci standard n 115 wicket keeper inner guard nspecification nas per bcci standard n 116 drop ro ball nspecification nsoft rubber substance n 117 victory stand nspecification nlight weight, easily portable n 118 whistle nspecification nreferee whistles n 119 measuring tape 100m, 50m nspecification nopen reel with rolling handle n 120 softball gloves nspecification nleather made and durable with flexibility n 121 softball leg and chest guard nspecification nflexible with comfort ability n 122 softball bat nspecification nlight weight with standard size n 123 starting block nspecification nrust proof, aluminum slotted channel, extra heavy aluminum foot blocks with 4 angle adjustments. n s / s plates with spikes for synthetic track. n 124 baton nspecification naluminum made relay baton n 125 hammer nspecification n4 kg, 5kg, 6 kg , rust proof, iaaf approved n 126 toe board nspecification nwooden iaaf approved n 127 high jump set nspecification nt base set , aluminium constructed, light weight n 128 take of board nspecification nwooden, iaaf approved n 129 boxing ring nspecification nbfi approved nouter dimension 7, 8 x 7, 8m ( 25, 6 x 25, 6 ft. ) ninner dimension between ropes 6, 1x6, 1m ( 20, 1 x 20, 1 ft. ) nswing stools in the corners ndouble suspension hard wood floor nheight 1 m ( 3, 28 ft. ) ncanvas: cotton 530g / m2 nfloor padding:1, 5cm pe foam nboxing ropes: leatherette cover, padding 2cm pe, steel ncore corners: leatherette cover, cushion pur n 130 boxing punch bag nspecification nsize 5 feet, with hook chain for punching and kick n 131 kabaddi mat set nspecification nikf approved nmat size: 1mt x 1 mt x 30 mm thickness nmaterial: eva & jsr ndensity: 125 130kg / cubic mtr ( tolerance + 10% ) nhardness: 30 degree ( tolerance + 15% ) neva foam nportable nwater resistant nnon – slip surface nsuper easy to clean nsoft cushioning ncolour red and blue ncourt dimension standard size ( one for male and one for female ) n 132 wrestling mat set nspecification nwfi approved nmat size : 2mt x 1 mt x50mm material : eva foam with nylon cover 750 gsm nset size : 72 n 133 grass cutting machine nspecification nwith electric 2.4 hp motor and latest technology n 134 lecture stand / podium nspecification nequipped with all latest technology n 135 university flag 1x2 nspecification nsoft quality cloth with university logo n 136 university flag small 1x1 nspecification nsoft quality cloth with university logo n...

Military Engineer Services - Haryana

23364860 tender for marking and painting including connecting items at af stn sirsa : scraping of grass shurbs , weeds , bushes , vegetation , etc . at ground level including removal of small irregularities in natural ground , stacking of spoil into heaps and removal of spoil exc . 50 . 00 metre and not exc . 100 . 00 metre and depositing where directed , complete all as specified and as directed . , m&l aluminium frame for link board made up from various aluminium sections including fabrication and all necessary cuttings , making holes and fixed together with steel screws including taking down damaged aluminium frame , complete all as specified and as directed . , s&f polycarbonate sheet 5 . 0mm thick , cut to shape as required for sign board and exposed side covered with vinyl laminating sheet of colours as ordered and fixed on pre fabricated aluminium frame with suitable steel screws including taking down demaged sheet , complete all as specified and as directed . , taking down existing polycarbonate sheet of any thickness and any size not exc . 3 . 00 square metre each and refixing after replacing the damaged porting with the new polycarbonate sheet 3 . 0mm thick and necessary modification of letters , complete all as specified and as directed . note : alphabets / numbers shall be measured and paid for separately under boq item 5 here in after . , s&f self adhesive reflective tape as for alphabets / numbers in dtgm / cautionary boards , complete all as specified and as directed . , getting out / desilting of silt / soil along with roots of grass / bushes ( if any ) from the beds of side drains to runway / ptt / loop taxi track drains , girth of drain bed not exc . 1 . 00 metre and depth of drain upto 1 . 50 metre , excavation of silt / soil not exc . 30 cm in depth including removing excavated materials not exc . 50 . 00 metre from the sides of drain and spreading in low laying areas , complete all as specified and as directed . , getting out / desilting of silt / soil along with roots of grass / bushes ( if any ) from the beds of side drains to runway / ptt / loop taxi track side drains , girth of drain bed not exc . 1 . 00 metre and depth of drain exc . 1 . 50 metre but not exc . 3 . 00 metre , excavation of silt / soil not exc . 30 cm in depth including removing excavated materials not exc . 50 . 00 metre from the sides of drain and spreading in low laying areas , complete all as specified and as directed . , m&l making good the existing damaged / broken corners , spoiled joints , pot holes , cracks or sunken slab of rigid pavements by carefully cutting or roughening up to required shape and size , cleaning the surfaces by air compressor and making it free from loose dirt , moisture , grease , etc . including removal of rubbish upto 50 . 00 metre and making good with epoxy resin mortar over a coat of epoxy resin primer including forming joints , etc . , complete all as specified and as directed . make : choksy / cipy / fosroc epoxy based primer , m&l making good the existing damaged / broken corners , spoiled joints , pot holes , cracks or sunken slab of rigid pavements / pqc by carefully cutting or roughnening up to required shape and size , cleaning the surfaces by air compressor and making it free from loose dirt , moisture , grease , etc . including removal of rubbish upto 50 . 00 metre and making good with a self levelling three component modified elastomeric compound etc . , complete all as specified and as directed . , demolition cement concrete ( un reinforced ) of any description in ground floors , pavings , etc . not exc . 150mm thickness ( above or below ground level ) and removing debris exc 1 . 5 km but not exc 5 . 0 km , etc . to outside md / af land , complete all as specified and as directed by engineer in charge . , m&l pcc 1:4:8 ( type d2 ) as sub base of flooring , pavement , pavings , etc . , including necessary form work , complete all as specified and as directed . , m&l sand filling under floors or in foundations including watering and consolidation , complete all as specified and as directed . , m&l machine pressed pre cast concrete interlocking polished paver block 80mm thick of m 40 grade , with grey cement and pigment of any shape and size ( as ordered ) , conforming is 15658 2006 , isi marked , laid dry over clean dry sand and grouted with clean dry sand as in floors , complete all as specified and as directed . note : clean dry sand will be measured and paid separately under appropriate item . , m&l preparing cracked top surfaces of concrete slab on runway / dispersal with wire brushes and cleaning with air compressor to remove all loose dirt , dust , scaling , greases , grass etc and priming the surfaces with dencot primer 601 / ng chem 121 etc complete all as specified and as directed by engineer in charge . make: denson / ngi , m&l applying den mort / ng mort trowelling compound on prime surfaces with thickness 02 to 05 mm incl filling of small holes upto 10mm depth and levelling the surfaces to match the existing surfaces level of runway / dispersal etc complete all as specified and directed by engineer in charge: make: denson / ngi , m&l preparing old painted surfaces of concrete / bituminous pavements , roads , etc . by cleaning with brushes , brooms and finally dusting with a piece of cloth / rags and applying one coat of road marking paint ( water based ) white / colour ( approved tint ) exc . 10 cm width on lines , dashes , arrows , letters , etc . , complete all as specified and as directed . , m&l obliterating the existing lines , letters , etc . with paint or pitch mixed with creosote oil in ratio of 3 . 0 kilogram of creosote with 1 . 0 kilogram of pitch to match with the existing work , complete all as specified and as directed . , m&l preparing old painted surfaces of concrete / bituminous pavements , roads , etc . by cleaning with brushes , brooms and finally dusting with a piece of cloth / rags and applying one coat of white wash on surfaces exc . 10 cm width on lines , dashes , arrows , letters , etc . , complete all as specified and as directed ....

Maharshi Dayanand University - Haryana

22679828 purchase of sports material consumable and non consumable for the session 2019 20: 1 boxing gloves 2 punching pad 3 speed ball with stand 4 boxing dummy punchman 5 boxing bag free stand 6 skipping rope 7 head guard 8 punching bag stand with punchig bag 9 3x6 feet mirror for shadow boxing 10 medicine ball ( 1kg 10, 2kg 10, 3kg 10, 5kg 10 ) 11 dumble ( 1kg 5 set, 2kg 20 set, 3kg 10 set, 5kg 5 set, 8kg 5 set, 500gm. 50 set ) 12 hammer ( 3kg 2 nos, 5kg 2 nos, 7kg 2 nos ) 13 boxing wall pad 14 stop watch 15 whistle 16 tennis ball ( willson ) 17 free standing punching speed ball bag 18 badminton racket ( yonex ) 19 badminton net 20 shuttle cock feather ( as 2 ) 21 shuttle cock nylon ( mavis 350 yellow ) 22 skippking rope 23 shuttle shooting machine 24 hurdles ( 6 inch 12, 1 feet 12 ) 25 ladder 26 medicine ball ( 1 kg 2, 2 kg 2, 3 kg 2 ) 27 wirst band 28 reaction time machine for badminton 29 hanging target for knocking practice 30 buzzo ball 31 resistance tube 32 dumble ( 500 gm. ) 33 lawn tennis ball ( head / champion ) 34 lawn tennis racket ( head ) 300 gm. 35 ladder 36 skeeping rope 37 lawn tennis net 38 basket 39 cones ( medium ) 40 standing kit bag ( hanah ) 41 standing dummy for kicking 42 twin fan pad ( usi / daedo ) 43 back kick shield ( daedo ) 44 jump box ( 1 feet 6, 2 feet 6, 3 feet 4, 4 feet 4 ) 45 chest guard [ ( 0 no 2 pair, 1 no 2 pair, 2 no 6 pair, 3 no 5 pair ) daedo ] 46 head guard ( daedo ) small size 47 shin guard ( daedo / adidass ) large size 48 aram guard ( daedo / wtf ) large size 49 w / l barbell ( osaka ) 50 w / l plate ( 5 kg 4, 10 kg 4, 15 kg 4 ) 51 weight machine 52 resistance tube 53 buzzo ball 54 training ladder 55 small hurdle ( 1 feet 12, 1.5 feet 12 ) 56 iron rack 57 iranian target ( daedo / hanah ) 58 white board & marker 59 sensor system ( kpnp ) 60 swiss ball 61 swimming coustems ( m ) ( pols / speedo ) 62 swimming coustems ( w ) ( pols / speedo ) 63 swimming caps ( speedo ) 64 swimming goggles ( speedo ) 65 towels ( big size ) ( dcm / bombay dying ) 66 measuring tape ( 30 mt. 3, 50 mt. 3, 100 mt. 3 ) 67 juding stand 68 plametic box ( different size ) 69 weight training stand ( bench press & half squat ) 70 starting gun 71 victory stand 72 finishing post 73 discuss ( 2 kg. 2, 1 kg. 2 ) 74 javelin ( 800 gm. 4, 600 gm. 4 ) 75 pole vault cross bar 76 high jump cross bar 77 hammer wire ( men 4 & women 4 ) 78 ankle weight ( 0.5 kg. 4 pair, 1kg. 4pair, 1.5 kg. 4pair ) 79 weight training bench74 80 weight training rod7 81 weight plate 82 wrestling dress ( m+w ) ( costume, shoes, sokcs, towel ) 83 wrestling score numbering plate 84 swiss ball ( nivia ) 85 thaira band ( nivia ) 86 resistance tube ( nivia ) 87 yoga mats ( size 4x8 feet ) 88 yoga kits ( men 7, women 7 ) 89 medicine box 90 buckets & mugs ( 6&6 ) steel 91 rubber neti ( zero no. ) 92 vastar dhoti 93 towels ( small 20, extra large 20 ) 94 bowls steel ( big size ) 95 target ball balls ( men 06, women 06 ) 96 wushu chest guard ( 0 no. 2, 1 no. 3, 2 no. 4, 3 no. 3 ) each in pair 97 wushu gloves ( rxn ) 98 wushu head guard ( daedo ) small size 99 wushu shin guard ( daedo ) 100 wushu arm guard ( daedo ) 101 wushu playing kit ( men 11 & women 08 ) 102 skates ( mission ) 103 hockey sticks ( bauer ) 104 puck ball ( sonic ) 105 helmet ( bauer ) 106 gloves ( bauer ) 107 goal post 108 quad hockey skate ( pro skate ) 109 quad hockey ball ( pro skate ) 110 quad hockey gloves ( pro skate ) 111 quad hockey ( pro skate ) 112 speed skates city run & pros kate 113 skin suit ( pro skate ) [ m&w ] 114 speed wheels ( mpc ) 115 roll ball balls ( nivia ) 116 hockey ball ( 5 dozen white, 5 dozen yellow ) 117 gum shields 118 hockey gloves 119 hockey shoes 120 hockey shin guard 121 hockey stroking 122 hockey t shirt ( m ) 123 hockey shorts ( m ) 124 hockey t shirt ( w ) 125 hockey skirts ( w ) 126 whistle ( fox 40 ) 127 vibs ( yellow 18 & green 18 ) 128 plastic ladder ( 25 feet ) 129 hurdle plastic ( 01 feet ) 130 cone plastic 131 marker plastic 132 basketball balls 133 football balls 134 vollyball balls 135 judo dress for session 2018 19 136 judo dress for session 2019 20 137 platform aluminium frame ( 4x4 mt. ) 138 jumping box ( small 10, large 10, extra large 10 ) 139 medicine ball ( 2 kg., 4 kg., 5 kg., 7 kg., 10 kg. ) two piece each 140 swiss ball 141 weight lifting rod ( one meter 1, zig zag 1 ) with sleves 142 dumbles ( 2.5 kg., 5 kg., 7.5 kg., 15 kg., 20 kg., 25 kg. ) each 2 pair 143 weight training plates ( 2.5kg., 5kg., 7.5 kg., 10 kg. ) each 2 pair 144 platform ( mini size ) 145 weight lifting stand for squat 146 bench press bench 147 stools 148 floor mat for exrcise ( size 4x6 feet ) 149 cricket balls ( sonex super ) 150 cricket ball ( white ) sg 151 jump stand ( 1feet, 2feet, 3feet, 4feet ) 152 parasuit cricket training ( nivia ) 153 hanging ball ( sg ) 154 throw net differnt size ( sg ) 155 catching board cricket ( omtex ) 156 medicine ball ( 2kg 1pc, 4kg 2pc, 5kg 2pc ) 157 bosu balance trainer 65 cm. 158 swiss ball 159 resistance tube ( ankle 06 pc, full 06 pc ) 160 score book international ( sg ) 161 hat cricket with uni. logo ( tk ) 162 beeps jakets ( green & yellow ) 163 nails for mat ( gulmake ) 164 ankle weight ( 1kg 6 pair, 2kg 6 pair ) 165 theraband ( nivia ) 166 ladder ( nivia ) 167 batting pad youth size ( sg ) 168 batting gloves youth size ( sg ) 169 keeping gloves ( medium, full size ) 170 keeping inner ( full size ) 171 cricket bat full size ( sg, ss, sf ) english willow 172 cricket helmat ( masuri ) 173 abdominal guard ( girls ) 174 batting thigh pad [ youth size right 2 & full size right 2 ( moonwalker ) ] 175 stumps with bails ( set ) 176 cone ( shorts & medium ) 177 daddu cone ( multi color ) 178 manual roller for pitch ( 500 kg 01 & 250 kg 01 ) 179 net for practice pitch full size ( green color ) 180 bush cutter ( petrol ) 181 boundry rope plastic cotted with rubber roll box 182 comlete sports kit for cricket players 183 zig zag rod 184 jcb or tractor old tyre for practice 185 tool box 186 pressure pump 187 vollyball balls 188 measuring tape ( 20 mt. 2, 30 mt. 2, 50 mt. 2, 100mt. 2 ) 189 rugby ball ( men 10, women 10 ) [ gilbert ] 190 ladder aluminum ( folding ) [ 10 feet 01, 15 feet 01 ] 191 iron almirah ( big ) 192 table tennis ball ( white ) 193 basketball net 194 american football kicking tee 195 rugby kicking tee 196 baseball balls 197 marking tape for kabaddi mat ( white 15 dz., red 10 dz., yellow 8 dz, blue 4 dz ) 198 american flag football flag ( yellow ) 199 soft tennis balls 200 archery arrow 201 handball ball ( w ) 202 drop ro ball balls 203 ball badminton racket ( m / w ) 204 ball badminton balls 205 marking tape for target ball ( white 10 dz., red 12 dz., yellow 10 dz, blue 6 dz ) 206 american flag football balls ( wilson ) 207 whistles ( fox 4o ) 208 stop watch ( casio ) 209 net ball balls 210 marking rope ( jute ) [ 120 mt. 01, 50 mt. 1 ) 211 marking tape for drop ro ball ( white 08 dz., red 04 dz., yellow 04 dz, blue 02 dz ) 212 marking tape for ball badminton ( white 10 dz., red 05 dz., yellow 05 dz, blue 02 dz ) 213 daddu and small cone for americn football & rugby ( 50 daddu & 50 small ) 214 training ladder plastic 215 american football gloves ( small & medium ) 216 hurdle ( 01 feet 20 & 1.5 feet 20 ) 217 white board with stand & marker for rugby , american football 218 standing dummy for rugby & american football 219 kassi & khurpe ( each 10 nos. ) 220 pvc pipe for ground & lawns watering ( 100 feet each ) 221 water camper ( 15 lt. ) 222 plastic sitting chairs 223 track suit for players 1 223.1 track suit for players 2 223.2 track suit for players 3 224 track suit for coaches and managers 1 224.1 track suit for coaches and managers 2 224.2 track suit for coaches and managers 3 225 shoes 1 225.1 shoes 2 225.2 shoes 3 226 bags 1 226.1 bags 2 226.2 bags 3...

Indian Navy - Haryana

21916604 tender for undertaking augmentation of infrastructure at imac & ifc ior , prefabricated / pre engineered structure for waiting area , for conference hall & common area as per approved drawing made of steel structure and partition wall , false ceiling including wiring and fittings , doors , windows , flooring as requirement . also cabin will be duly painted with the branded paint make following work will be included in the above prefabricated structures: ( a ) pre laminated wooden flooring with pvc sheet 0 . 3mm thick & 6mm heat loan under flooring all flashing corner & joint profiles . ( b ) false ceiling made of 600x600 mm t grid with main all electrical work required for the day needs of the office / conference including 2x2 led down lights and fans as required . also all suitable sockets for incorporating single pole / triple pole mcb on wall / on existing pedestal complete . wiring for light point / fan / exhaust fan / call bell switches will be modular switches fixed with suitable gi box and wired with 1 . 5sq mm insulated copper wire . ( c ) energy saving type ceiling fans with double ball bearing motor blades , downrod , canopy , capacitor , etc . suitable for operation on 230 volts 50 hz ac supply complete as required size 1200 mm . exhaust fan will be heavy duty of 230 volts 50 hz ac supply complete as required size 1400rpm exhaust fan . ( d ) structure comprising of prefabricated / porta cabin type structure made of steel columns & puling made of hot mild steel section which will be fabricated according to the required design . all steel parts / members painted with red oxide primer roof with g i colour coated sheet of 0 . 5mm thick with non asbestos fiber reinforced aerated cement sandwich modules made of light weight fiber aerated cement / concrete core composed of portland cement , flyash , binders , etc . and 4mm thick non asbestos fiber is 14862:2000 on either side of the core having tongue and groove on longitudinal side of the modules are erected / installed using galvanized iron steel tracks of 1 mm thick track for fixing to the floor & top of the wall respectively including all necessary material required for erecting and fixing the wall panel / corner flashing complete as per the approved design panel size will be 2400x600mm / panel requirement will be approx . 15 in nos . also fixing of gypsum board paneling with gi grid section including joining and fixing of 12mm thick paneling with gi grid section . ( e ) applying two or more coats of o . b . d painting of approved colour shades & brand the job will include primer coat and putty work filling etc . complete , air purification and humidity control units 1 . 5 ton each with voltage stabilizers and all piping and copper piping and electrical wiring , altering of existing partition , providing and fixing of partition wall made of gi section insulation with 50mm glass wood both side 8mm cement fiber board with jointing an tapeing duly painted , providing of frame 12mm thick toughened door with modular fixtures and locking system . , providing and fixing of aluminium power coated window with 6mm glass size 7 ftx4ft with all modular fitting , providing and fixing of fall ceiling made with gi / wooden frame and finishing with fabrication board , flexible ply duly painted as per approve design by officer in charge , providing and fixing of led panel light 32 watt 600*600mm with fitting , heavy duty electric wire with pvc conducting pipe for workstation , fall ceiling , led panels , light , fan , etc . with modular switch , socket & fixture . , wiring for internal telephoning system with pvc conducting pipe and junction boxes . , providing and laying of lane & computer wiring with pvc conducing for all workstation , conference tables & led panel . , providing and fixing of glass partition made with top & bottom wooden designer partition finishing with 1mm thick laminated sheet & pu polish & 12 mm thick toughened glass with modular fixture , providing and laying of base putty & oil base premier & finishing with 2 nos . coat of plastic paint for old wall , providing and fixing of acrylic carpets 12mm thick with 4mm layer of heat loan for extra cushioning , digital time clock 5 displays in 1 10x66 with all fixtures , sun film with logo of imac & ifc ior , providing and laying of digital 3d wall paper , providing and fixing of zebra type window blinds with all fixture , heavy duty cabling race way with fixtures , providing and fixing of wooden wall paneling with base frame gi / wooden grid with all flashing & fixture , providing and fixing of designer wooden paneling for led light wall made with korean wood / hpl board with gi / aluminium frame grid finishing with all fixture , providing and laying of 3d wall paper , lan and computer wiring , providing and fixing of acrylic carpets 12mm thick with 4mm layer of heat loan for extra cushioning , fabrication of conference table with all modular fixture & electrical plug wiring etc . for 28 persons made with 20mm thick water proof board with s / steel frame under table [ 304 ] , drawer prevision of draw cabinet under table , international socket panel 10nos , table race way & finishing with 2mm thick acp sheet / 1mm thick designer high gloze laminate . , sofa two seat with pu leather upholstery made with marandi wood frame with all fixtures , storage cabinet made with 20mm thick wooden board modular fixtures with 1mm thick designer laminate size 7x4 , providing and fixing of acoustic wall panel made with acrylic carpet 7 arm stone wooden composite wall panelling support , gi grid frame & fixtures , dining table for four persons with wooden dining chairs made with teak wood top with italian stone finish . , outdoor centre table for three persons with outdoor caste iron chair , acrylic all weather artificial grass , fabrication of designer cubical work station with storage space made with wooden water proof 200mm thick board & finishing with all modular designer laminate / acp sheet with all modular fixture , cpu trolley , electrical plug panel , key board tray , pedestal drawer storage , race way etc . , conference table with all modular fixture 7 electrical plug panel wiring etc . for 10 persons made with 20mm thick water proof board & finishing with s / steel frame under table of 304 grade , drawer provision of draw cabinet under table , socket panel 4 in nos . , table race way & finishing with 2mm thick acp sheet / 1mm thick designer high gloss laminate . , chair revolving medium back . 360 degree swivel , posture control with multilocking position synchronized mechanism with backrest with lumber support of polypropylene at multilevel across back , chair revolving high back with arm rest . central tilt type , leatherette fabric material for seat cover . , led 3d board sign board with all the fixture and electrical fittings and adapter for main door size 18x84 , led light 3d board sign board with all fixture and electrical fittings and adapter and wiring for both the sides of the main door 18x18 , providing and fixing of display cabinet & panelling for led monitor with lights and wiring made with the korean wood / hpl board with gi / aluminium frame grid finishing with all fixtures . , fabrication of conference table with all modular fixtures & electrical fitting and panel wiring for 6 persons made with steel frame under table of grade 304 , drawer provision of draw cabinet under table , with international fittings of socket panel 4 in nos . table race way & finishing of table with 2mm thick acp sheet / 1mm thick designer high gloss laminate sheer . , round centre table with designer top of stone & three cough chair . , wooden dining table with 6 in nos . chair made with teak wood and pu polish finish . , designer centre table made of teak with pu polish finish table top of italian stone . , providing and fixing of view cutter made of wooden board , 3d panel hpl sheet...

Pt B D Sharma Post Graduate Institute Of Medical Sciences - Haryana

20822453 rate contract for two years extendable for purchase of furniture items for pgims and uhs rohtak through central store 1. officer / executive table: size:1500x900x750 mm, with five drawers ( two drawers left side and three drawer right side ) 22g square steel pipr 16 gauge leg , top frame and foot rest 16g sheet, 1top pre laminated wood base 2mm pvc beading 2. white board: ( 4’x3’ ) two nos key plate provide at the back of board. anodized aluminum frame / beading all round the white board with earser tray to hold duster. 3. blood collection chair: 900hx450wx450d 4. sofa set 5 seater: sofa with wooden frame chrome plated legs / wooden legs, pu leatherite size three seater 1775l x 750 h x 675h, two seater ( 1250l x 750d x 675h ) 5. tea table: centre table of 1200 x 600 mm 6. shoe rack : ( as per standard size ) 7. table with drawer: 1200w x 600d x 750h mm 8. lecture stand wooden: polygonal in shape with mike, 2 large interior shelves, stable base 1274mm max. height, 612mm wide, socket for multimedia devices 9. foot step wooden 10. bench: wooden top of size 1800 x 300 mm with metal understructure of 18 g pipe.=> open tender...

Pt B D Sharma Post Graduate Institute Of Medical Sciences - Haryana

20392662 rate contract for two years extendable for purchase of furniture items for pgims and uhs rohtak through central store 1. officer / executive table: size:1500x900x750 mm, with five drawers ( two drawers left side and three drawer right side ) 22g square steel pipr 16 gauge leg , top frame and foot rest 16g sheet, 1top pre laminated wood base 2mm pvc beading 2. white board: ( 4’x3’ ) two nos key plate provide at the back of board. anodized aluminum frame / beading all round the white board with earser tray to hold duster. 3. blood collection chair: 900hx450wx450d 4. sofa set 5 seater: sofa with wooden frame chrome plated legs / wooden legs, pu leatherite size three seater 1775l x 750 h x 675h, two seater ( 1250l x 750d x 675h ) 5. tea table: centre table of 1200 x 600 mm 6. shoe rack : ( as per standard size ) 7. table with drawer: 1200w x 600d x 750h mm 8. lecture stand wooden: polygonal in shape with mike, 2 large interior shelves, stable base 1274mm max. height, 612mm wide, socket for multimedia devices 9. foot step wooden 10. bench: wooden top of size 1800 x 300 mm with metal understructure of 18 g pipe.=> open tender...

Northern Railway - Haryana

20173695 supply of display unit of aluminum frame with three sides transparent glass.item list : ( 1 ) display unit of aluminum frame with three sides transparent glass: 5mm, door glass: 8mm, 04nos. shelves of glass: 10mm with locking arrangement. total size of unit 6feet x 3feet x 1.8feet with led light 2 feet with double door. senior section haryana 10.00 numbers...

Public Health Engineering Department - Haryana

20087231 tender for annual maintenance estimate of the office of engineer in chief haryana bay no. 13 20 sector 4 panchkula 1 office furniture/ curtain rod p/f of curtain rod including labour /na / p/f curtains rod & braket for mm cell , mechanical staff h.o buldg 2 office furniture/ almirah providing and fixing of almirah lock /almirah lock / office storage almirah 3 office furniture/ door closure providing and fixing of door closure /n.a / ce (prog) 4 office furniture/ door handle providing and fixing of door handle /n.a / office of eic bay no 19.20 sector 4 pkl 5 office furniture/ table /repair of office table / repair of office at project section & mm cell photo state machine table including doors lock 6 miscellaneous items/ aluminium jali aluminium jali 5 gauge / aluminium jali for c.e project room in window of size 2 x 3.5 with aluminium frame completein all respect i job....

Haryana Agricultural University - Haryana

18830778 auction sale of unserviceable articles for foot mats, scissors, ups, ups with battery, angle iron, wood working letha machine with one motor, scanner hd scanjet, plotter design jet, corel draw on win, free hand graphic studio 7.0 for forwin educational cd, iavt software, graphics tablet, projector slide sorter with cabinet, transparency maker, aluminium folding ladders, lock navtal, camera asahi pentax, camera codac with stand, getner screen meter epedies cope model 360 a, photophone 16mm sound projector, film strips cum slide projector, systrenies standard signal generator, stencil cutting macbine. gestener rotary duplicate model 320, overhead projector, horns, mike stand, wooden trolly, computer chair with arm, side rack, round table, central table l shape, waste paper basket, show case for display of samples projected plate jars, show case for bird species, museum specimen display show case, display board wall handging type, table desk cum tracer, little genia portable electric generator set, color tv onida, vcr, umatic tapes, trans light, tape recorder cassettee philips make, console tape recorder, ultra portable sound mixer, exhibition panel, stand for board, loud speaker, bucket plastic, display board mobil, beg, rack with drawers film storage, projector screen, rack, jug plastic, films, extension board, plastic trays, curtain. flex with frame, flex with frame, aluminium stand with flex printing, aluminium frame with bedding, iron frame bidding with pasting, calculator, name plate, thermos, tower with guyed rope with antenna cable, rmt fret saw jigsaw type with three face electrical mc motor, photos pasted, silk screening exposing frame, fasal panchang khariff in circle, photo frame, small board, calender frame, photograph pasting, salves, boxes for photograph....

Indian Railway - Haryana

18504289 tender for supply of fixing of aluminum frame of size 9 x 7 consisting of double leaf door size 6 x 3 havingclear glass on top & bakelite sheet with arrangement of floor spring for both side movement of leaf at bottomalong with locking arrangement, provision of 1 height s.s. wire mesh on top of complete portion ( as per sketchenclosed)...

Indian Railway - Haryana

18279391 tender for supply of fixing of aluminum frame of size 9 x 7 consisting of double leaf door size 6 x 3 havingclear glass on top & bakelite sheet with arrangement of floor spring for both side movement of leaf at bottomalong with locking arrangement, provision of 1 height s.s. wire mesh on top of complete portion ( as per sketchenclosed)...

Indian Railway - Haryana

18091556 tender for supply of fixing of aluminum frame of size 9 x 7 consisting of double leaf door size 6 x 3 havingclear glass on top & bakelite sheet with arrangement of floor spring for both side movement of leaf at bottomalong with locking arrangement, provision of 1 height s.s. wire mesh on top of complete portion ( as per sketchenclosed)...

Government Of Haryana - Haryana

16725047 supply of tools, machinery and equipment at g.i.t.i. ( w ) ambala city 85 multiple feature photocopier machine with furniture / table : colour laser printer a4 in one, 21 ppm colour printin g and copying, 3.5 inch colour tft display, high quality colour output. nos. 1 86 zig zag embroidery machine complete set: body square shape, black colour, belt drive, hook macanism: rotary, miximum stitches per mintue:2000 sqm, stitch width : 6 mm, len gth: 5 mm, stitch type: zig zag, theard mechanism: two thread lock stitch nos. 16 87 air conditioner : 2 ton with stabilizer five star grading rating, 2.0 tons, split type nos. 3 88 pressing pad : material sponge rubber, made of slicon, neoprene, nos. 1 89 storage almirah: steel to be used: pretreated prime quality crca steel confirming to is 513 gr. d quality. thickness of steel “22 swg for body and shelves, 20 swg for the doors, handle: to be made of chrome plated non ferrous metal allay.. doors: to be stiffened by flat shaped full height steel stiffeners spot welded to the backs of the door., 5 shelves steel almirah ) size: 195 cm: height inclusive of 15 cm pedestal height, 90 95 cm width 45 cm depth + 5% variation allowed. nos. 1 90 display board : size :3x2 with glass nos. 1 91 notice board: wooden frame, glass coverlight weight, aluminium frame, size :3x2 with glass cover...

Military Engineer Services - Haryana

16012292 provision of road furniture addn / altn to dhobi ghat improvement of garbage bins and provision of aluminium frame windows and certain misc works in block no p17 at af camp naraina under age br af rajokri of ge af gurgaon => ( s ) for boq, dates...

Military Engineer Services - Haryana

15796808 provision of road furniture addn / altn to dhobi ghat improvement of garbage bins and provision of aluminium frame windows and certain misc works in block no p17 at af camp naraina under age br af rajokri of ge af gurgaon...