Maharshi Dayanand University - Haryana
39913400 providing and laying exterior emulsion paint in rose garden, botanical garden and triangle park in between 9j houses in mdu rohtak...
39913400 providing and laying exterior emulsion paint in rose garden, botanical garden and triangle park in between 9j houses in mdu rohtak...
39811568 inviting the firm for purchasing buildings materials rate of block shahzadpur district ambala (group e) , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked (10 kg.) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , varnish approved make isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala (steel wala) , sand paper (pattewala) , sand paper (water proof) , thinner , lime colour , fevicol ddl , t.t. oil , lime , snowcem , chalk powder , neel , pop (approved make ) , white cement basedputty (approved make ) , anti termite material (alderin) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. (a) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . (a) single colour including seat cover , pvc cistern 7.5 liter (two lever cistern) isi marked (perryware, hindware, cera) , wash basin (lavatory suites). (a) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.41 (iv)) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.19 (i)) , supply of swr p trap 75mm x 75 mm with isi marka (prince, finolex, supreme )s , u.p.v.c. pipe 6kg pressure 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. pipe 6kg pressure 90mm with isi marka (prince, finolex, supremeetc.) , u.p.v.c. pipe 6kg pressure 110mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. pipe 6kg pressure 160mm with isi marka (prince, finolex, supremeetc.) , u.p.v.c. pipe 6kg pressure 200mm with isi marka (prince, finolex, supremeetc.) , u.p.v.c. coupler heavy 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. coupler heavy 90mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. coupler heavy 110mm with isi marka (prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. elbow heavy 90mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. elbow heavy 110mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. tee heavy 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. tee heavy 90mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. tee heavy 110mm with isi marka (prince, finolex, supreme etc.) , hdpe water storage tank with covers/lids marked with is: 12701 (sintex, diplast, o.k., supreme(i) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of (premium quality)make somani/kajaria/.nitco/jhonson , 600mm x 600mm vitrified floor tiles double charged(premium quality)of make somani/kajaria/nitco/jhonson. , bitumen (85/25) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement (jk,birla)...
39811363 inviting the firm for purchasing buildings materials rate of block ambala i district ambala ( group e ) beyond 20 km , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked ( 10 kg. ) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , varnish approved make isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala ( steel wala ) , sand paper ( pattewala ) , sand paper ( water proof ) , thinner , lime colour , fevicol ddl , t.t. oil , lime , snowcem , chalk powder , neel , pop ( approved make ) , white cement basedputty ( approved make ) , anti termite material ( alderin ) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. ( a ) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . ( a ) single colour including seat cover , pvc cistern 7.5 liter ( two lever cistern ) isi marked ( perryware, hindware, cera ) , wash basin ( lavatory suites ) . ( a ) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.41 ( iv ) ) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.19 ( i ) ) , supply of swr p trap 75mm x 75 mm with isi marka ( prince, finolex, supreme ) s , u.p.v.c. pipe 6kg pressure 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 90mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 160mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 200mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. coupler heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 110mm with isi marka ( prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , hdpe water storage tank with covers / lids marked with is: 12701 ( sintex, diplast, o.k., supreme ( i ) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of ( premium quality ) make somani / kajaria / .nitco / jhonson , 600mm x 600mm vitrified floor tiles double charged ( premium quality ) of make somani / kajaria / nitco / jhonson. , bitumen ( 85 / 25 ) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement ( jk, birla ) ...
39811137 inviting the firm for purchasing buildings materials rate of block ambala i district ambala ( group e ) upto 20 km , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked ( 10 kg. ) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , varnish approved make isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala ( steel wala ) , sand paper ( pattewala ) , sand paper ( water proof ) , thinner , lime colour , fevicol ddl , t.t. oil , lime , snowcem , chalk powder , neel , pop ( approved make ) , white cement basedputty ( approved make ) , anti termite material ( alderin ) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. ( a ) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . ( a ) single colour including seat cover , pvc cistern 7.5 liter ( two lever cistern ) isi marked ( perryware, hindware, cera ) , wash basin ( lavatory suites ) . ( a ) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.41 ( iv ) ) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.19 ( i ) ) , supply of swr p trap 75mm x 75 mm with isi marka ( prince, finolex, supreme ) s , u.p.v.c. pipe 6kg pressure 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 90mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 160mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 200mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. coupler heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 110mm with isi marka ( prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , hdpe water storage tank with covers / lids marked with is: 12701 ( sintex, diplast, o.k., supreme ( i ) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of ( premium quality ) make somani / kajaria / .nitco / jhonson , 600mm x 600mm vitrified floor tiles double charged ( premium quality ) of make somani / kajaria / nitco / jhonson. , bitumen ( 85 / 25 ) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement ( jk, birla ) ...
39811130 inviting the firm for purchasing buildings materials rate of block saha district ambala ( group e ) , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked ( 10 kg. ) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala ( steel wala ) , sand paper ( pattewala ) , sand paper ( water proof ) , fevicol ddl , t.t. oil , snowcem , chalk powder , neel , pop ( approved make ) , white cement basedputty ( approved make ) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. ( a ) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . ( a ) single colour including seat cover , pvc cistern 7.5 liter ( two lever cistern ) isi marked ( perryware, hindware, cera ) , wash basin ( lavatory suites ) . ( a ) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.41 ( iv ) ) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.19 ( i ) ) , supply of swr p trap 75mm x 75 mm with isi marka ( prince, finolex, supreme ) s , u.p.v.c. pipe 6kg pressure 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 90mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 160mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. coupler heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 110mm with isi marka ( prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , hdpe water storage tank with covers / lids marked with is: 12701 ( sintex, diplast, o.k., supreme ( i ) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of ( premium quality ) make somani / kajaria / .nitco / jhonson , 600mm x 600mm vitrified floor tiles double charged ( premium quality ) of make somani / kajaria / nitco / jhonson. , bitumen ( 85 / 25 ) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement ( jk, birla ) ...
39810864 inviting the firm for purchasing buildings materials rate of block barara district ambala (group e) , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked (10 kg.) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , varnish approved make isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala (steel wala) , sand paper (pattewala) , sand paper (water proof) , thinner , lime colour , fevicol ddl , t.t. oil , lime , snowcem , chalk powder , neel , pop (approved make ) , white cement basedputty (approved make ) , anti termite material (alderin) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. (a) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . (a) single colour including seat cover , pvc cistern 7.5 liter (two lever cistern) isi marked (perryware, hindware, cera) , wash basin (lavatory suites). (a) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.41 (iv)) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.19 (i)) , supply of swr p trap 75mm x 75 mm with isi marka (prince, finolex, supreme )s , u.p.v.c. pipe 6kg pressure 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. pipe 6kg pressure 90mm with isi marka (prince, finolex, supremeetc.) , u.p.v.c. pipe 6kg pressure 110mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. pipe 6kg pressure 160mm with isi marka (prince, finolex, supremeetc.) , u.p.v.c. pipe 6kg pressure 200mm with isi marka (prince, finolex, supremeetc.) , u.p.v.c. coupler heavy 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. coupler heavy 90mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. coupler heavy 110mm with isi marka (prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. elbow heavy 90mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. elbow heavy 110mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. tee heavy 75mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. tee heavy 90mm with isi marka (prince, finolex, supreme etc.) , u.p.v.c. tee heavy 110mm with isi marka (prince, finolex, supreme etc.) , hdpe water storage tank with covers/lids marked with is: 12701 (sintex, diplast, o.k., supreme(i) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of (premium quality)make somani/kajaria/.nitco/jhonson , 600mm x 600mm vitrified floor tiles double charged(premium quality)of make somani/kajaria/nitco/jhonson. , bitumen (85/25) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement (jk,birla)...
39810846 inviting the firm for purchasing buildings materials rate of block ambala ii district ambala ( group e ) , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked ( 10 kg. ) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , varnish approved make isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala ( steel wala ) , sand paper ( pattewala ) , sand paper ( water proof ) , thinner , lime colour , fevicol ddl , t.t. oil , lime , snowcem , chalk powder , neel , pop ( approved make ) , white cement basedputty ( approved make ) , anti termite material ( alderin ) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. ( a ) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . ( a ) single colour including seat cover , pvc cistern 7.5 liter ( two lever cistern ) isi marked ( perryware, hindware, cera ) , wash basin ( lavatory suites ) . ( a ) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.41 ( iv ) ) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.19 ( i ) ) , supply of swr p trap 75mm x 75 mm with isi marka ( prince, finolex, supreme ) s , u.p.v.c. pipe 6kg pressure 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 90mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 160mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 200mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. coupler heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 110mm with isi marka ( prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , hdpe water storage tank with covers / lids marked with is: 12701 ( sintex, diplast, o.k., supreme ( i ) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of ( premium quality ) make somani / kajaria / .nitco / jhonson , 600mm x 600mm vitrified floor tiles double charged ( premium quality ) of make somani / kajaria / nitco / jhonson. , bitumen ( 85 / 25 ) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement ( jk, birla ) ...
39810843 inviting the firm for purchasing buildings materials rate of block naraingarh district ambala ( group e ) , supply of interior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of exterior emulsion paint from manufacturer listed in hsr isi marked of any shade of approved make. , supply of synthetic enamel paint of manufacturer listed in hsr isi markedsuch of approved make. , supply of primer from manufacturer listed in hsr isi marked such of approved make. , supply of oil bound distemper isi marked ( 10 kg. ) of approved make. , supply ofall colours stainer isi marked , supply ofall colours stainer isi marked , varnish approved make isi marked , painting brush 5 ist quality , painting brush 4 ist quality , painting brush 3 ist quality , painting brush 2 ist quality , painting brush 1 ist quality , painting roller ist quality , steel patti , gurmala ( steel wala ) , sand paper ( pattewala ) , sand paper ( water proof ) , thinner , lime colour , fevicol ddl , t.t. oil , lime , snowcem , chalk powder , neel , pop ( approved make ) , white cement basedputty ( approved make ) , anti termite material ( alderin ) , polythene for tile terracing , supply of indian type orissa or orya w.c. seat. with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. ( a ) size 580mm in white. , supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . ( a ) single colour including seat cover , pvc cistern 7.5 liter ( two lever cistern ) isi marked ( perryware, hindware, cera ) , wash basin ( lavatory suites ) . ( a ) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.41 ( iv ) ) , flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . ( hsr no. 30.19 ( i ) ) , supply of swr p trap 75mm x 75 mm with isi marka ( prince, finolex, supreme ) s , u.p.v.c. pipe 6kg pressure 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 90mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. pipe 6kg pressure 160mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. pipe 6kg pressure 200mm with isi marka ( prince, finolex, supremeetc. ) , u.p.v.c. coupler heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. coupler heavy 110mm with isi marka ( prince, finolex, supreme ) , u.p.v.c. elbow heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. elbow heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 75mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 90mm with isi marka ( prince, finolex, supreme etc. ) , u.p.v.c. tee heavy 110mm with isi marka ( prince, finolex, supreme etc. ) , hdpe water storage tank with covers / lids marked with is: 12701 ( sintex, diplast, o.k., supreme ( i ) 500litre capacity , supply of kota stone minimum 25 mm thick in any pattern , granite stone in all shades 15 mm to 18mm thick , baroda green marble stone 15mm to 18mm thick. , 300mm x 450mm ceramic glazzed tile of ( premium quality ) make somani / kajaria / .nitco / jhonson , 600mm x 600mm vitrified floor tiles double charged ( premium quality ) of make somani / kajaria / nitco / jhonson. , bitumen ( 85 / 25 ) , polythine sheat , epoxy , grout , floor tilesadhessive , white cement ( jk, birla ) ...
39722175 renovation of toilets and bathroom of quarter guard at ss bn, itbp force , demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge: in cement mortar , dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tiles 10 mm to 25 mm , dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below , dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. , dismantling of flushing cistern of all types (c.i./pvc/vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. , disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer in charge, beyond 50 m initial lead, for all leads including all lifts involved. , providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & desertory other frames/chowkhat comprising of virgin pvc polymer of k value 58 60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer in charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). note: for wpc solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. frame size 50 x 100 mm , providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58 60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer in charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately): 30 mm thick , providing and fixing 12mm thick frameless toughened opaque glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer in charge , providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of engineer in charge and finished smooth: granite stone of approved shade sqm , providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. granite stone slab of colour black, cherry/ruby red area of slab upto 0.50 sqm , providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , dismantling w.c. pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of engineer in charge. , providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , providing and fixing factory made upvc white colour casement/casement cum fixed glazed windows comprising of upvc multi chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvc profile), upvc extruded glazing beads of appropriate dimension, epdm gasket, stainless steel (ss 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, g.i fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer in charge. (single / double glass panes and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. casement window double panels with top fixed with s.s. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( area of window upto 2.50 sqm). , providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 453x357 mm , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes: 25 mm nominal dia pipes , providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required : single half stall urinal with 5 litre p.v.c. automatic flushing cistern each , providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore , removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. , wall painting with premium acrylic emulsion paint of interior grade, having voc (volatile organic compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. two coats , providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. glazed vitrified tiles matt/antiskid finish of size of tile 600 x 600 mm , providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge. , providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing p/s trap, complete in all respect as per directions of engineer in charge. each , wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. , supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch , supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 a switch , supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 a socket outlet , supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 a socket outlet , supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 module (200mmx75mm) , providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘t’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “t” of size 24x28 mm made out of 0.33 mm (minimum) sheet, 1200 mm long spaced between main’t’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘t’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a perimeter wall angle pre coated steel of size(24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. main ‘t’ runners to be suspended from ceiling using g.i. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm g.i. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘t’, bottom exposed with 24 mm of all tsections shall be pre painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer in charge. , providing & fixing at site under counter type wash basin on a prepared granite counter: jaquar continental cns wht 705 under counter basin with fixing accessories, size: 605x430x200 mm, shape: oval or of similar make (roca/kohler/grohe) with equivalent appearance, market rate, performance, accessories, shape, size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site single wall mounted lever basin mixer consisting of operating lever, cartridge sleeve, wall flange, nipple & spout : jaquar fusion fus 29233nk including concealed body (jaquar ald 233n) for the same or of similar make (roca/kohler/grohe) with equivalent appearance, market rate, performance, accessories, shape, size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site heavy duty quarter turn 2 way bib cock jaquar opal prime opp 15041pm or of similar make (roca/kohler/grohe) with equivalent appearance, market rate and performance, accessories, shape, size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site heavy duty angular stop cock with wall flange jaquar kubix prime (kup 35053pm) or of similar make (roca/kohler/hindware) with equivalent appearance, market rate, performance, accessories, shape and size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site heavy duty quarter turn concealed stop cock kubix prime (kup 35083kpm) including exposed and concealed part or of similar make (roca/kohler/grohe) with equivalent appearance, market rate, performance, accessories, shape and size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site cp soap dispenser jaquar acn 1135n with glass bottle or of similar make (roca/kohler/grohe) with equivalent appearance, market rate and performance, shape, size, etc. and making good the complete work as per the approval of engineer in charge , providing & fixing at site cp soap dish holder bath accessories (acn 1131n) (roca/kohler/grohe) make as per the site requirement etc complete , providing & fixing at site cp towel rail (600mm long ) jaquar (acn 1111sm) or of similar make (roca/kohler/grohe) with equivalent appearance, market rate and performance, shape, size, etc. and making good the complete work as per the approval of engineer in charge make as per the site requirement etc complete , providing & fixing at site cp health faucet jaquar (ald 577) (jaquar/kohler/parryware) or of equivalent make (roca/kohler/grohe) with same appearance, market rate and performance, shape, size, etc. and making good the complete work as per the approval of engineer in charge make as per the site requirement etc complete , providing & fixing at site cp wall type mixer kubix prime (kup 35117pm) or of equivalent make (roca/kohler/grohe) with same appearance, market rate and performance, shape, size, etc. and making good the complete work as per the approval of engineer in charge make as per the site requirement etc complete:15mm nominal size , providing and installation of pvc exhaust fan havells ventil air hush 150 mm white (fhvvehuwht06) or equivalent of philips/bajaj/orient or equivalent make in rate, appearance and performance with shutter complete 300 mm in the opening, including making good the damage, connection, testing, commissioning etc. as required. as approved by engineer in charge , sitc of havells octane led 2x2 panel 36 w led 4000 k light or equivalent make (bajaj/philips/orient) in market rate, appearance and performance in false ceiling with complete fitting , providing and fixing havells austra mirror light 20 w led 4000 k complete fitting or similar item of equivalent make (bajaj/jaquar/philips/orient) with equivalent performance, size, shape, accessories and market rate as per the approval of the engineer in charge , sitc of jaquar 15 l storage water geyser (erica digital 15 ltr storage water heater) with multi function safety valve, double safety thermostat, earth leakage circuit breaker, energy saving high density puf insulation, automatic shut off and 2000 wattage of similar make (roca/kohler/hindware) equivalent in market rate, performance, same accessories, size. shape and appearance with complete fitting as approved by the engineer in charge...
39721767 renovation of toilet/bathroom of fabrication at ss bn itbp force saboli sonipat haryana , demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge in cement mortar , dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tiles 10 mm to 25 mm , dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below , dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. , dismantling of flushing cistern of all types (c.i./pvc/vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. , disposal of building rubbish / malba /similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer in charge, beyond 50 m initial lead, for all leads including all lifts involved. , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) cum , 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & desertory other frames/chowkhat comprising of virgin pvc polymer of k value 58 60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer in charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). note: for wpc solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. frame size 45 x 70 mm , providing and fixing factory made single extruded wpc (wood polymer composite) solid board one side white color and other side of board laminted with pvc foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of k value 58 60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer in charge. (note: stainless steel piano hinges/soft close clip on concealed hinges and necessary s.s screws shal be paid separately) 25 mm thick , providing and fixing 12mm thick frameless toughened opaque glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer in charge , providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of engineer in charge and finished smooth: granite stone of approved shade sqm , providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. granite stone slab of colour black, cherry/ruby red area of slab over 0.50 sqm , providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work , extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. , providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , dismantling w.c. pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of engineer in charge. , providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘t’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “t” of size 24x28 mm made out of 0.33 mm (minimum) sheet, 1200 mm long spaced between main’t’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘t’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a perimeter wall angle pre coated steel of size(24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. main ‘t’ runners to be suspended from ceiling using g.i. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm g.i. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘t’, bottom exposed with 24 mm of all tsections shall be pre painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer in charge. , providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 1500x450 mm , providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :oval shape 450x350 mm (outer dimensions) , providing and fixing uplasticised pvc connection pipe with brass unions : 45 cm length 15 mm nominal bore , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes , disconnecting damaged overhead/terrace pvc water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of engineer in charge. , providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per , providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :15 mm nominal bore , providing and fixing uplasticised pvc connection pipe with brass unions : 18.21.2 45 cm length 15 mm nominal bore , providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests , providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required : range of two half stall urinals with 5 litre p.v.c automatic flushing cistern , removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. , wall painting with premium acrylic emulsion paint of interior grade, having voc (volatile organic compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour two coats , providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. glazed vitrified tiles matt/antiskid finish of size of tile 600 x 600 mm , providing and fixing ptmt grating of approved quality and colour. 18.58.2 rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating , providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing p/s trap, complete in all respect as per directions of engineer in charge. each , providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge. (a) 15 mm nominal dia , providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore each , providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931. 15 mm nominal bore each , providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge. , wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. , providing & fixing at site under counter type wash basin on a prepared granite counter: jaquar continental cns wht 705 under counter basin with fixing accessories, size: 605x430x200 mm, shape: oval or of similar make (roca/kohler/hindware) with equivalent appearance, market rate, performance, accessories, shape, size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site heavy duty quarter turn 2 way bib cock jaquar opal prime opp 15041pm or of similar make (roca/kohler/hindware) with equivalent appearance, market rate and performance, accessories, shape, size, etc. with wall flange and making good the complete work as per the approval of engineer in charge , providing & fixing at site cp shop dish holder bath accessories (acn 1131n) (jaquar/kohler/parryware) make as per the site requirement etc complete , providing & fixing at site cp towel rail (600mm long ) jaquar (acn 1111sm) or of similar make (roca/kohler/hindware) with equivalent appearance, market rate and performance, shape, size, etc. and making good the complete work as per the approval of engineer in charge make as per the site requirement etc complete , providing & fixing at site cp health faucet jaquar (ald 577) (jaquar/kohler/parryware) or of equivalent make (roca/kohler/hindware) with same appearance, market rate and performance, shape, size, etc. and making good the complete work as per the approval of engineer in charge make as per the site requirement etc complete , providing and installation of pvc exhaust fan havells ventil air hush 150 mm white (fhvvehuwht06) or equivalent of philips/bajaj/orient or equivalent make in rate, appearance and performance with shutter complete 300 mm in the opening, including making good the damage, connection, testing, commissioning etc. as required. as approved by engineer in charge , sitc of havells octane led 2x2 panel 36 w led 4000 k light or equivalent make (bajaj/philips/orient) in market rate, appearance and performance in false ceiling with complete fitting , providing and fixing havells austra mirror light 20 w led 4000 k complete fitting or similar item of equivalent make (bajaj/jaquar/philips/orient) with equivalent performance, size, shape, accessories and market rate as per the approval of the engineer in charge , sitc of jaquar 15 l storage water geyser (erica digital 15 ltr storage water heater) with multi function safety valve, double safety thermostat, earth leakage circuit breaker, energy saving high density puf insulation, automatic shut off and 2000 wattage of similar make (roca/kohler/hindware) equivalent in market rate, performance, same accessories, size. shape and appearance with complete fitting as approved by the engineer in charge...
39674179 tender for ranota,manota,nangla jamalgarh, group of 3 no. of habitations annual maintenance .works for water supply head no. 1 : repairing of ugt of pump chamber and boundary wall at village manota and all other works contingent thereto. sub head no. 1 : hsr 1 11.8 na cement plaster (in coarse sand) 12 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand) through rate 160.00 sqm 92.00 14720.00 0.00 0.00 14720.00 2 11.74 na interior finishing wall painting with acrylic emulsion paint, having voc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2. two coats through rate 360.00 sqm 43.00 15480.00 0.00 0.00 15480.00 3 5.7 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 3. in lime mortar through rate 26.00 cum 389.00 10114.00 0.00 0.00 10114.00 4 7.22 b brick work brick work with common burnt clay non modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 2. cement mortar 1:6 (1 cement : 6 coarse sand)...
39572825 tender for for construction at dhanak sabha fatehabad 1 [10.100.2]cement concrete 1:8:16 flooring 2. cement concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. 2 [10.51]providing and fixing granite stone in all shades 15mm to 18 mm thickin skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade ofgranite including labour for fixing cramps pins and dowels etc. 3 [10.58]providing and fixing 1st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 4 [10.77]providing and laying 80mm thick factory made cement concrete interlocking paver block of m 35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer in charge. 5 [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) 6 [11.57]providing and laying average 6mm thick pop coatingon walls, ceiling, beams and lintels etc. complete in all respects as approved by the engineer in charge. 7 [11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) 8 [11.67.1]applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. water thinnable cement primer 9 [11.68.2]applying priming coat: 2. with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 10 [11.71.1]wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. two or more coats on new work 11 [11.78]painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. 12 [13.35]providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of t iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 13 [13.41]providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 14 [4.14.1]earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. 15 [5.7.4]demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 4. in cement mortar 16 [6.16]reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone iii): 3 graded stone aggregate 20 mm nominal size). 17 [6.30.3]centering and shuttering including strutting, propping etc. and removal of form for 3. suspended floors, roofs, landings, balconies and access platform 18 [6.30.5]centering and shuttering including strutting, propping etc. and removal of form for 5. lintels, beams, plinth beams, girders, bressumers and cantilevers 19 [6.34.6]steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. 6. thermo mechanically treated bars of grade fe 500d or more. 20 [7.21.1]brick work with common burnt clay non modular bricks of class designation 10.5 in foundation and plinth in: 1. cement mortar 1:4 (1 cement : 4 coarse sand) 21 [7.22.1]brick work with common burnt clay non modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 1. cement mortar 1:4 (1 cement : 4 coarse sand) 22 [9.10.1]painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. with residual type petroleum bitumen of grade vg 10 23 [9.14.1]providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: 1. with common burnt clay non modular brick tiles of class designation 10 24 [9.57.1]providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 1. 75 mm diameter ...
38845348 tender for painting of the sinchai bhawan, jhajjar 1 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. hsr 11.59 2 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete hsr 30.21 3 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 1. one or more coats on old work hsr30.27.1 4 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. one or more coats on old work hsr 30.28.1 5 finishing walls with acrylic smooth exterior paint of required shade : 1. old work (two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface hsr 30.37.1. ...
38723456 repair of boundary wall in office building panchkula, providing and applying of acrylic exterior emulsion paint, repair of plaster and fixing of ms board and all other works contingent thereto (a/mtc . of ph services in sector 1 to 6 mdc and sector 2...
38607559 tender for annual maintenance landa for providing and fixing road safety items on rewari narnaul road on krishnawati river bridges. 1 [10.7]providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 2 [11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) 3 [11.67.1]applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. water thinnable cement primer 4 [11.71.1]wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. two or more coats on new work 5 [34.19.1]hazard marker sign board 300x900mm rectangular as per irc 67 2012 with retro reflective sheeting as per astm d 4956 09 and irc 67 2012, fixed over 4mm thick aluminium composite material (acm) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to is 4923 firmly fixed to ground including foundation concrete m 25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of mortandh specifications. supplier shall provide a warranty as per clause 6.9 of irc 67 2012 for retro reflective sheeting and a certified copy of test reports from an independent test laboratory including three year outdoor weathering test report for sheeting tested in india condition conforming to clause 6.7 of irc 67 2012. 1. usingretro reflective sheeting class c as per irc 67 2012 6 [34.37]road delineators providing and fixing of standard metal delineator as per irc 79:2019 consisting of retro reflective area in white colour using microprismatic retro reflective sheeting on each side conforming with irc 67 2012 and meeting the coefficient of retro reflection values as per class c table specification. the delineator shall be painted with only black colour powder coat of minimum 40 microns thickness, on top of retro reflective sheeting only in white colour shall be pasted on both sides. the structure shall have height not less than 800 mm above ground, width not less than 100 mm and shall extend not more than 300 mm below ground while being installed. the delineator shall have grooves across the length to make the reflective sheet vandal proof. the delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc or as desired by site engineer. the product shall be provided with 3 year outdoor warranty report tested in india condition as per irc 67: 2012 requirement.in case of soft ground, a proper foundation may be provided as per approved design. in case foundation is required to be provided, the items of excavation and foundation concrete are required to be measured and paid separately. 7 [7.22.1]brick work with common burnt clay non modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 1. cement mortar 1:4 (1 cement : 4 coarse sand) ...
38568631 tender for comprehensive maint to tech area ( northern side ) at af stn sirsa. 1 demolition cement concrete ( un reinforced ) of any description in ground floors, pavings, etc. not exc. 150mm thickness ( above or below ground level ) and removing debris, etc. to outside md / af land, complete all as specified and as directed. 2 m&l for cement concrete 1:4:8 type d2 ( 40mm graded stone aggregate ) 100mm thick in sub bases, complete all as specified and as directed. 3 m&l for cement concrete 1:2:4 tybe b1 ( 20mm graded stone aggregate ) 100mm thick as in flooring complete all as specified and as directed. 4 m&l for cementconcrete type b 1, 1:2:4 ( 20mm graded stone aggregate ) 40mm thick as in paths / hardstanding finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed. 5 m&l for cement concrete 1:3:6 type c2 ( 40mm graded stone aggregate ) , 75mm thick in plinth protectionfinishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed. 6 m&l for machine pressed precast conctete interlocking paver block any shape and size confirming to is 15658 2006 of 60 mm thickness, m 35 grade, with grey cement & no pigment, incl taking out existing old paver blocks and removingfrom sitecomplete all as specified and directed. 7 m&l for sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed. 8 taking down cement plaster including raking out joints, hacking for key, scrubbing down with water and removing debris, etc. to outside md / af land, complete all as specified and as directed. 9 m&l for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound ( as per manufacturers instructions ) onbrick / stone walls or concrete surfaces finished even and fair ( upto any height ) for external surfacescomplete all as specified and directed.note : water proofing compound shall be measured and paid seperately as supply only. 10 supply only liquid water proofing compound, conforming to is and / or as approved, complete all as specified. 11 m&l for rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and as directed. 12 m&l for preparing new plastered surfaces of walls and applying two coats of weatherproof exterior emulsion paint ( in camouflage pattern ) over and including priming coat with suitable exterior primer, applied as per manufacturers recommendations complete all as specified and as directed. 13 m&l for preparing new rough cast plastered surfaces of walls and applying two coats of weatherproof exterior emulsion paint ( in camouflage pattern ) over and including priming coat with suitable exterior primer, applied as per manufacturers recommendations complete all as specified and as directed. 14 demolition of brick work built in cement mortar and in any position including all quoins, arches and pillars, etc. incl removal of debsris from site complete all as specified and as directed. 15 m&l for brick work with fly ashbricks ( old size bricks ) , straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:6, complete all as specified and as directed. 16 m&l brick work using serviceable bricks obtained from item no. 16 here in before including removing old mortar, straight or curved on plan exc. 6.0 metre mean radius, built in cement mortar 1:6, complete all as specified and as directed. 17 dismantling of asbestos cement ( corrugated, semicorrugated, plain, etc. ) sheets in roof / wall coverings and removal from sitecomplete all as specified and as directed. 18 dismantling of fibreglass / polycarbonate roofing sheet ( corrugated, semicorrugated, plain, etc. ) sheets in roof / wall coverings and removal from sitecomplete all as specified and as directed. 19 s&f 0.50 mm thick tct ( total coated thickness ) pre coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib / multi rib profile galvalume sheetinghaving 1000 1020 mm width and 28 30 mm high crest @ maximum 250 255 mm pitch ( centre ) with sheets manufactured out of 0.50 mm this tct ( total coated thickness ) high tensile galvalume sheets having tensile strength 550 mpa with 18 20 micron top coat over 5 micron primer and 8 10 micron alkyld backer zinc aluminium alloy az 150, sheets having a dip metallic zinc ( 43.5%0 aluminium ( 55% ) & silicon ( 1.5% ) with total mass coating of 150 gms / sqm on both sides, having wide pans with minimum 3 smallstiffening ribs for effective water shedding and special male / female ends with full return legs on laps for purlin support and fixed as per existing profile of roof completeall as specified and directed. 20 s&f pre painted, galvalume aluminium zinc coating gi based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 mpa, as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 21 dismantling structural steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed. 22 m&l for steel work in tubular trusses including special shaped washer etc complete using erw or induction butt welded tubes conforming to is 1161 1979 grade st 240 complete all as specified and directed. ( note: quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts ( including rivets or bolts and nuts ) , providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete ) 23 m&l for preparing new or previously untreated steel and iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint ( first quality ) over a red oxide zinc chrome primer, complete all as specified and as directed. 24 dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed. 25 m&l for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165 complete all as specified and directed. 26 dismantling ofwallandceilingboards ( fibre, pulp, insulation, etc. ) or insulationboards / slabs / blankets, any thickness, including cover fillets incl removal from site complete all as specified and as as directed. 27 s&f 6mm thick hpsc cement fibre plain building boards, fixed to wall, including finishing with 2 mm thick wall puttycomplete all as specified and as directed. 28 s&f false ceiling with powder coated exposed g.i. grid suspension system consisting of main runner 3600 mm long, cross tee 1200mm / 600mm long and wall angle, wall angle fixed on pvc dash fasteners on the perimeter of the wall by steel screws with distance 300 mm c / c, main runners placed @ 1200mm, cross tee 1200mm inserted in the pre cut slots of main runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm and additional cross tees of 600 mm placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600mm x 600mm, grid of module size 600mm x 600mm shall be supported by 6 mm dia g.i. wire from purlins / soffit complete all as specified and directed. note: ceiling board will measured and paid seperately under appropriate item. 29 s&f 12mm thick mineral fibre core ceiling board / tiles for insula tion and accoustic purposes, 60x60 cm in size, fixed on gi snap grid frame work with steel screws, complete all as specified and as directed. 30 m&l for solid pvc wall lining consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame, including various pvc angle / section all as per manufacture instruction and specificationas including taking down carefully the existing electric point wiring and making it concealed by cutting grooves on brick walls as required at site for wall panelling complete all as specified and as directed. 31 m&l for 5mm thick pvc sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make pvc frame as per specification and drawing. 32 dismantling floor, paver tiles, hearth or wall tiling, etc. including cement mortar bedding ( but not backing ) and removing debris, etc. to outside md / af land, complete all as specified and as directed. 33 m&l for non skid glazed ceramic coloured / printed floor tiles 400x400x6.0 to 7.0mm thick in flooring, set and jointed in neat cement slurry and pointed in white / coloured cement, laid over and including 15mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 34 m&l for coloured glazed ceramic tiles in vertical surface 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick rendering as screed or backing coat of wall tilein cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 35 m&l coloured glazed ceramic tiles 300x200x6.0 to 7.0mm thick in vertical surface i.e. dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 36 m&l for vitirified coloured tiles 9 to 10mm thick ( square / rectangular ) , double charged, light shade, polished, area of each tile not exc. 0.36 square metre in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, laid over and including 15mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be include in the quoted unit rate. 37 m&l for vtirified coloured tiles 9 to 10mm thick ( square / rectangular ) double charged, light shade, polished, area of each tile not exc. 0.36 square metre in vertical surface i.e. dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, laid over and including 10mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be include in the quoted unit rate. 38 m&l dismantling stone slabs and / or tiles of any description or thickness in floors, aprons, etc. laid, bedded and pointed in cement mortar, removal of debris outside af land, cleaning of area to remove dust, loose particles, washing with water and providingmachine cut kota stone slab 20 25mm thick in flooring, laid over 20mm thick screed base in cement mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.note : cost of cement screed bed shall deem to be include in the quoted unit rate. 39 m&l dismantling stone slabs and / or tiles of any description or thickness in floors, aprons, etc. laid, bedded and pointed in cement mortar, removal of debris outside af land, cleaning of area to remove dust, loose particles, washing with water and providinggranite ( of any type ) tiles, 18 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick screed or screed bed in cement mortar 1:4, complete all as specified and as directed.note : cost of cement screed bed shall deem to be included in the quoted unit rate. 40 m&l for rcc 1:2:4 ( type b1 ) using 20mm graded aggregate as counter / platform supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 41 m&l for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia complete all as specified and directed. 42 s&f in repair rotational moulded polyethene water storage tank, 500 litre capacity, cylindrical, vertical with closed top, 3 layered, conforming to is, hoisted and fixed in position complete all as specified and as directed. 43 s&f in repair rotational moulded polyethene water storage tank, 1000 litre capacity, cylindrical, vertical with closed top, 3 layered, conforming to is, hoisted and fixed in position complete all as specified and as directed. 44 s&f in repairball brass valves, high pressure, with polythene float and flynut complete for 20mm dia bore pipe , screwed for iron pipe or brass ferrule and fixed complete all as specified and as dieceted. 45 s&f in repair looking mirror 5.0mm thick of size 600x600mm, fixed with chromium plated brass spacers 25mm to 30mm in size ( one each corner ) including rounding the edges of the mirror and fixed in repairs, complete all as specified and as directed. 46 s&f in repair brass chromium plated tubular towel rail 20mm dia, 60 cm long with brackets complete all as specified and as directed. 47 s&f in repair stainless steel grating round 100mm dia with waste hole jointing with solvent cement complete all as specified and as directed. 48 s&f in repair chromium plated health faucet with 1mtr stainless steel tube indcluding necessary fitting and fixtures complete all as specified and as directed by engr in charge. 49 s&f in repair vitreous china, white, half stall urinal flat back with grating and union for discharge pipe ( excl flush pipe and flushing cistern and waste pipe ) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed. 50 s&f brass chromium plated urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed. 51 s&f in repair 75mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 52 s&f in repair 110mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 53 s&f in repair pvc ( swr ) bends any 75mm bore complete all as specified and as directed 54 s&f in repair pvc ( swr ) bends any 110mm bore complete all as specified and as directed 55 s&f in repair 75mm bore pvc ( swr ) floor trap, plain with grating including jointing with solvent cement 56 taking up or down steel tubing 15mm bore ( dia ) and connections, segregating the serviceable pipes and connections, stacking properly at site ( s ) and keep in safe custody for re use, complete all as specified and as directed. 57 taking up or down steel tubing 20mm bore ( dia ) and connections, segregating the serviceable pipes and connections, stacking properly at site ( s ) and keep in safe custody for re use, complete all as specified and as directed. 58 supply & laying steel water tubing 15mm bore ( dia ) , galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed. 59 refixing old steel tubing 15mm bore ( dia ) and connections ( serviceable pipes and connections obtained from item here in before ) in new or old position ( walls, ceiling, floors, etc. ) including cleaning both inner and outer surfaces of pipes by using wire brush including provision of new gi connections ( as required ordered at sites ) , complete all as specified and as directed. 60 supply & laying steel water tubing 20mm bore ( dia ) , galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed. 61 refixing old steel tubing 20mm bore ( dia ) and connections ( serviceable pipes and connections obtained from item no. 15 here in before ) in new or old position ( walls, ceiling, floors, etc. ) including cleaning both inner and outer surfaces of pipes by using wire brush including provision of new gi connections ( as required ordered at sites ) , complete all as specified and as directed. 62 s&f vitreous china white squatting pan of size 580x440mm, orissa pattern with integral foot rests, ‘p’ or ‘s’ trap, providing joints between flush pipe and socket of wc pan, cones, india rubber ( nozzles of wc pan ) incluiding provision of lime concrete bedding and making good to floor / distrubed surfaces and fixed in repairs, complete all as specified and as directed. 63 s&f in repair pvc flushing cistern 10 litre capacity white, low level, valve less, syphonic action type with inlet, ball valve, float and handle, pvc waste pipe 32mm bore ( dia ) of suitable length, a pair of cast iron bracket / erecting stand duly painted including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 and fixed in repairs, complete all as specified and as directed. 64 s&f in repair vitreous china wash basin, white, flat back, size 550x400mmexcluding taps, waste, chain and plug and porcelain stopper butincluding brackets cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe 65 s&f in repair bib tap 15mm bore ( dia ) , cast copper alloy, chromium plated, fancy type, longbody with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. 66 s&f in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, facny type screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 67 s&f in repair stop cock 15mm bore ( dia ) , cast copper alloy, chromium plated, fancy type with long shank and cup ( concealed type ) , screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and as directed. 68 s&f in repair angle valve 15mm bore ( dia ) , cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for iron pipe and fixed in repairs, complete all as specified and as directed. 69 s&f in repair pvc waste pipe 32mm dia ( bore ) having 600mm long and fixed complete to walls, ceilings or in floors, etc.and fixed in repairs, complete all as specified and as directed. 70 s&f in repair pvc connection pipe 15mm size and 60 cm in length with adopter nuts of pvc and fixed in repairs, complete all as specified and as directed. 71 taking down wooden chowkat or frame with shutter ( without taking off shutter from the frame ) , exc. 1.5 square metre but not exc. 4.0 square metre each, complete all as specified and as directed. 72 taking down and refixing of shutters of any descriptionin same opening n exc 1sq. m each complete all as specified and as directed. 73 taking down shutters of any descriptionn exc 1 sqm each complete all as specified and as directed. 74 supply and fixed steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for fixing wire mesh including one shop coat of priming, complete all as specified and directed. ( note : sheet glass for glazing shall be measured and paid seperately ) 75 taking down chowkat or frame ( any type ) with shutter ( without taking off shutter from the frame ) , n.exc. 1.5 square metre each, complete all as specified and as directed. 76 s&f steel rolling shutters thickness of lath 1mm, gear operated type with bevel gear box and crank handlewith out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specifeid and as directed. 77 m&l for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete fe 290, ( gde e 165 ) complete all as specified and directed. 78 s&f 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. 79 s&f pressed steel frame of size 125x60mm using 1.25mm thick mild steel sheets for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including making good to disturbed suurfaces complete all as specified and as directed. 80 s&f pressed steel frame of size 105x60mm using 1.25mm thick mild steel sheets for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including making good to disturbed suurfaces complete all as specified and as directed. 81 s&f flush door shutter 35mm thick, solid core construction with block board core and plywood face panels commercial type on both side with decorative face veneer with lipping / frame to match and fitted to steel frame, complete all as specified and as directed. 82 m&l second class hardwood plain framed panelled shutter factory made 35mm thick ( any number of panels ) with panels of 12mm thick veneered particle board, medium density or 12mm thick plywood board, bwr with commercial veneering on both faces and fitted to steel frame, complete all as specified and as directed. 83 m&l for 35mm thick second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. ( without sash bars ) , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me mbers of shutters as specified in ssr part i, section 8, clause 8.24 ( a ) ; supplied and fitted to chowkats complete all as specified and as directed. 84 s & f pvc solid door frame of size 50 x 47 mm made out of 5 mmthick prelaminated single side pvc sheet reinforced with ms square tube complete all as specified and as directed. 85 s & f 30 mm thick factory made both side prelaminated solid panel pvc door shutter consisting of frame made out of ms tube of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails, treated with a coat of metal primer, ms frame covered with heat moulded prelaminated pvcc channel for stiles and both side prelaminated pvc sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminatedpvc sheet to be fitted in the ms frame welded / sealed to the stiles and rails with suitable pvc sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed. 86 s&f butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type b 21 complete all as specified and directed. 87 s&f aluminium handle 150mm long ( weight not less than 120 gram ) , extruded section, fabricated type, anodised, complete all as specified and as directed. 88 s&f anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long ( 1 no each shutter. ) . hinges type b 21 100mm long ( 2 no each shutter. ) suitable handle ( 1 no each shutter. ) complete all as directed by engineer in charge. 89 s&f anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and as directed.note : ( a ) the rates include for provision of pvc protected sheeting and its removal after fixing the frame work. ( b ) hinges, shutters and lugs shall be measured and paid for separately. 90 s&f sheet glass 4.0mm thick, ordinary quality and glazing, in square exc. 0.50 sqm in each pane of aluminium windows, complete all as specified and as directed. 91 s&f stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. 92 s&f in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as diected. 93 s&f aluminium anodised security / window grill of ( as approved ) 4mm thick made out of anodised aluminium section including necessary side channel and other accessories required for fixing etc, complete all as specified and as directed. 94 hacking out old broken glass ( any thickness, size, quality or description ) from wooden or metal frames, glazed with putty or fixed with beads, complete all as specified and as directed. 95 s&f sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane of steel windows, complete all as specified and as directed. 96 s&f in repair aluminium handle 150mm long ( weight not less than 120 gram ) , extruded section, fabricated type, anodised, complete all as specified and as directed. 97 s&f aluminium barrel tower bolt 200mm long ( weight not less than 210 gram ) , extruded section, complete all as specified and as directed. 98 s&f aluminium barrel tower bolt 100mm long ( weight not less than 210 gram ) , extruded section, complete all as specified and as directed. 99 s&f 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specifed and as directed. 100 m&l preparing new or previously untreatedwood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint ( first quality ) , over a coat of wood primer complete, including cleaning the surface, all as specified and as directed. 101 m&l new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint ( first quality ) , over a coat of zinc chrome red oxide primer complete, including cleaning the surface, all as specified and as directed. 102 repairing of aluminium door, windows, ventilators shutter fixed / side hung / sliding type including replacement of necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws, etc. and repairing of locking arrangement if any, complete all as specified and as directed.note : cost of materials requiredfor smooth functioning of shutter shall deem to be included in the quoted unit rate. 103 s&f in repair door closer aluminium ( die cast ) body, hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 kilogram , complete all as specified and as directed. 104 s&f in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and as directed. 105 s&f in repair for mild steel, chromium plated curtain rod 25mm dia ( as approved ) , complete all as specified and as directed. 106 s&f in repair for mild steel, chromium plated side dome and to be fitted / tightened for curtain rod 25mm dia with screws, complete all as specified and as directed. 107 s&f in repair for mild steel, chromium plated bracket ( shaped ) , for holdingfor mild steel, chromium plated curtain rod 25mm dia , complete all as specified and as directed....
38085858 tender for repair of submersible pump (rewinding of 7.5hp motor and servicing of 7 stage pump, including cable, dol starter), repair of firefighting system (repair/replacement of 125 no.s smoke detector, servicing repair of jockey, hydrant and sprinkler pumps, ms pipeline replacement of 10 15 meters concealed within the walls and making good the same), permanent solution for water logging in basement (making slope of the basement towards the exit gate, cleaning of 50000 ltr rain water harvesting tank, supply, installation of 5hp booster sump pump along with pipes and related accessories), making of chajjas equivalent to running 215 mtr*0.5 mtr ), repair of damaged water supply line (115 mtr of cpvc water pipeline of 15/25mm dia including bends, tees and sockets as required), rectification of blockage in all washrooms and seepage in the wall area(dismantling of tiles, demolition of walls as required, rectification of leakage including waterproofing, replacement of sanitary fittings (17 wcs, 13 wash basins,12 urinals) and accessories, brickwork and plastering of the walls and making good the toilets for utilisation, rectification of doors, windows and related carpentry works including providing of tower bolts, hinges, handles, locks, epdm beadings for upvc windows and replacement of putty for ms windows, replacement of window panes upto 15sqm, replacement of façade glasses 5mm thick toughened reflective glass complete with silicon adhesive and double tape, repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of engineer in charge. with cement mortar 1:4 (1cement : 4 fine sand) upto area of 300 sqm, painting of interior and exterior walls exterior walls of approx. 2500 sqm to be painted with acrylic distemper paint and painting of internal walls of approx.. 8000 sqm with plastic emulsion paint. wooden fixtures of approx. 500 sqm to be painted with synthetic enamel pain, fixing of paver blocks and flooring levels of 50 sqm with paver blocks of 80mm thickness, replacement of electrical fittings (switches sockets, mcbs) 450 switches of 6a switches and 40 switches of 16a and replacement of conventional lights with leds 400 no.s of 18w t5 tube light...
37904191 tender for quotations for fixing of rates of various building material block ballabgarh district faridabad group d 1 building material group d 2 synthetic enamel paint all shades nerolac / asian 3 snowcem of approved make 4 wooden primer nerolac / asian 5 oil bound washable distemper nerolac / asian 6 plastic acrylic emulsion paint 7 colour steiner nerolac / asian 8 lime 9 pop 10 turpentine oil 11 wall putty jk 12 sand paper 13 exteroir wall primer 14 exteroir apexnerolac / asian 15 rates are inclusive of carriage, loading, unloading but excluding gst ...
37897628 inviting the quotations for fixing building materials rates block faridabad district faridabad group d 1 building material group d 2 synthetic enamel paint all shades nerolac / asian 3 snowcem of approved make 4 wooden primer nerolac / asian 5 oil bound washable distemper nerolac / asian 6 plastic acrylic emulsion paint 7 colour steiner nerolac / asian 8 lime 9 pop 10 turpentine oil 11 wall putty jk 12 sand paper 13 exteroir wall primer 14 exteroir apexnerolac / asian 15 rates are inclusive of carriage, loading, unloading but excluding gst ...
37897534 inviting the quotations for fixing building materials rates block tigaon district faridabad group d 1 building material group d 2 synthetic enamel paint all shades nerolac / asian 3 snowcem of approved make 4 wooden primer nerolac / asian 5 oil bound washable distemper nerolac / asian 6 plastic acrylic emulsion paint 7 colour steiner nerolac / asian 8 lime 9 pop 10 turpentine oil 11 wall putty jk 12 sand paper 13 exteroir wall primer 14 exteroir apexnerolac / asian 15 rates are inclusive of carriage, loading, unloading but excluding gst ...
37073947 tender for estimate for painting work in csa in shri vishwakarma skill university at dudhola, palwal 1 30.21 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 2 11.58 providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get un even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc .complete 3 11.75 wall painting with premium acrylic emulsion paint of interior grade, having voe (volatile organic compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 11.75.1 one coat...
36851676 annual maintenance of s.e. residence in sector 46, faridabad providing exterior emulsion paints brick work floor tiles , wall tiles c c 1 1 1 2 3 steek etc s e residence in sector 46 faridabad and all other works contingent thereto...
36302698 bids are invited for cement , fine sand , coarse sand , bricks , aggregate , steel tmt bar , concrete paving block , stone aggregates , glass strip , wall primer , interior, emulsion paint , exterior paint, acrylic based , synthetic enamel paint , wall putty , white cement 1 kg pkt , turpentine oil , paint roller set , paint roller extension pole , paint brush 5 inch , paint brush 4 inch , paint brush 3 inch , paint brush 2 inch , putty blade 2 inch , putty blade 4 inch , putty blade 6 inch , fine sandpaper 80 no , iron brush total quantity : 43274...
35720638 tender for completion of community center with in mc area copper wiring in pvc conduit ( surface / recess ) 1.1. wiring for light / fan / call bell point in 1.5 sqmm frls pvc insulated copper conductor cable in1.6 mm thick pvc conduit pipe. group a 2 supply, erection, testing of ceiling fansis marked ( as per is code 374 ) with suitable gi pipe complete in all respects complete as per directions of engineer in charge 1. 48 ( 1200mm ) 3 100 mm dia pvc pipe 4 150 mm dia pvc pipe 5 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 6 12 mm cement plaster of mix : 2. 1:3 ( 1 cement: 3 fine sand ) 7 15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 ( 1 cement: 4 fine sand ) 8 providing and laying average 6mm thick pop coatingon walls, ceiling, beams and lintels etc. complete in all respects as approved by the engineer in charge. 9 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 10 wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. two or more coats on new work 11 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, panelling and dash fastenersto be paid for separately ) : 1.2. for fixed portionpowder coated aluminium ( minimum thickness of powder coating 50 micron ) 12 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge. 2. pre laminated particle board with decorative lamination on both sides 13 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : 2. with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) 14 providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: 1. white vitreous chinaware wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer 15 providing and fixing 15 mm c.p. brass laboratory cock swan neck of best quality ( to the approval of engineer in charge ) . 1. one way 16 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete.2.2. flexible pipe 40 mm dia 17 providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe andc.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 1. one urinal basin with 5 litre white p.v.c. automatic flushing cistern 18 brick work with common burnt clay non modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in: 2. cement mortar 1:6 ( 1 cement : 6 coarse sand ) 19 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 1. 15 mm dia nominal bore 20 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 2. 20 mm dia nominal bore 21 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) : 1. 15 mm nominal bore 22 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) : 2. 20 mm nominal bore 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 1. 15 mm nominal bore 24 providing and fixing c.p. brass stop cock ( concealed ) of standard design and of approved make conforming to is:8931. 1. 15 mm nominal bore 25 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 1. 15mm nominal bore 26 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work below plinth level and up to floor iv level: 2. 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 20 mm nominal size ) 27 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) . 28 centering and shuttering including strutting, propping etc. and removal of form work for : 2. retaining walls, return walls, walls ( any thickness ) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. 29 steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 3. cold twisted bars 30 granular sub base ( mix in place ) construction of granular sub base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per technical clause 401 of mort&h technical specifications...
35636261 bids are invited for purchasing of construction materials cement , fine sand , coarse sand , bricks , aggregate , steel tmt bar , concrete paving block , stone aggregates , glass strip , wall primer , interior, emulsion paint , exterior paint, acrylic based , synthetic enamel paint , wall putty , white cement 1 kg pkt , turpentine oil , paint roller set , paint roller extension pole , paint brush 5 inch , paint brush 4 inch , paint brush 3 inch , paint brush 2 inch , putty blade 2 inch , putty blade 4 inch , putty blade 6 inch , fine sandpaper 80 no , iron brush total quantity : 43274...
35475649 miscellaneous work in ward no 4 in municipal council fatehabad providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 2 [ 11.5.3 ] 12 mm cement plaster of mix : 3. 1:4 ( 1 cement: 4 fine sand ) 3 [ 11.98.1 ] finishing walls with 100% premium acrylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additives. 1. new work ( two or more coats applied @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm 4 [ 13.29.2 ] steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 5 [ 13.41 ] providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) . 6 [ 17.22.1 ] water bound macadam gr i 1. water bound macadam grading i ( without screenings for low volume roads ( undesignated ) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel / vibratory roller 8 10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications 7 [ 17.5.3 ] compacting original ground 3. compaction of earthworkcompaction of & preparation of sub grade including loosening, levelling of earth 225 mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the table 3000 2 as per technical clause 305 of mort&h specifications 8 [ 17.69.2 ] interlocking concrete block pavement 2. providing and laying 80 mm thick isi marked interlocking paver blocks conforming to is 15658:2006 / irc sp 63: 2004 of all shapes and colours in design mix cement m 40 over the bed of 30 mm thick fine sand complete in all respect. 9 [ 17.70 ] removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3. 10 [ 21.87.1.1 ] constructing brick masonry road gully chambers as per standard drawings ( as per sizes given below ) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 ( as per specified in item no.10.6 ) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thickcement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the c.i. road gully grating and frame including painting with coal tar ( as specified in item no. item 21.48 ) complete to the requirement of the engineer in charge 1.1. single road gully chamber size: 610mm x 457mm x 800mm 11 [ 21.93.1 ] providing and fixing sfrc manhole covers and frames marked with is: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re handling etc. complete in all respects to the satisfaction to the engineer in charge. 1. type: extra heavy duty set ( ehd 35 ) 560mm clear opening 12 [ 3.1.18 ] by mechanical transport including loading, unloading and stacking18. disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as per directions of engineer in charge. 13 [ 5.23.2 ] demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge. 2. nominal concrete 1:2:4 or leaner mix ( i / c equivalent design mix ) 14 [ 6.1.1 ] providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work below plinth level and up to floor iv level: 1. 1:1½:3 ( 1 cement: 1½ coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) 15 [ 6.39.1 ] providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 ( 1 cement : 3 coarse sand ) , including the cost of required centering, shuttering complete. 1. 1:1½:3 ( 1 cement: 1½ coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) . 16 [ 7.20.2 ] brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. cement mortar 1:6 ( 1 cement : 6 coarse sand ) . 17 [ 9.57.2 ] providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 2. 110 mm diameter...
35095235 tender for creation of 66 kv ais substation jaindapur 12.5 / 16mva, 66 / 11kv t / fs ( to be provided by hvpnl ) 2 time synchronizationequipment 3 66 kv sf 6 breaker along with 20% extra sf 6 gas 4 66 kv isolator with e / switch 5 66 kv isolator without e / switch 6 66 kv surge arrestor 7 66 kv cts for line & bus coupler ( 600 300 150 / 1 1 1a ) 8 66 kv t / f ct ( 300 200 150 / 0.577 1 1a ) 9 66 kv pt 10 66 kv nct ( 300 200 150 / 1a ) 11 11 kv nct ( 1200 900 / 5a ) 12 11 kv la 13 11 kv 13 panel board ( 1250a ) with one sem on each t / f i / c panel ( including one no. bus sectionalizer panel ) 14 66kv c&r panels a ) bus coupler protection and circuit breaker panel ( without auto reclose ) with sas 15 b ) line protection and circuit breaker panel ( without auto reclose ) with sas 16 c ) transformer protection and circuit breaker panel ( without auto reclose ) with sas 17 4800kvar 12.65kv automatically switched capacitor bank along with allied equipment ( controlledby one vcb ) 18 220v 100ah battery ( vrla ) 19 220 v 100 ah battery charger 20 220 v 100 ah d.c.d.b. 21 415 v lt ac distribution board 300 a 22 11 / 0.4 kv station t / f 200 kva 23 ( a ) 1.1 kv copper control cable unarmoured for 66kv bays of size 7cx4mm2, 4cx4mm2, 2cx4mm2, 2cx6mm2, 3cx2.5mm2, 16cx2.5mm2, 10cx2.5mm2 & 7cx2.5mm2 including junction box etc. refer section 6 of copper & control cable & section 7 for switchyard erection. 24 ( b ) stainless steel mk ( 200tb ) 25 11 kv power cable xlpe 1c x1000mm2 for t / f to 11kv incomer with termination kit for both ends. 26 11 kv power cable xlpe3c x 185sq mm for capacitor bank with termination kit for both ends 27 11 kv power cable xlpe 3c x 50 sq mm for station t / f with termination kit for both ends. 28 650 / 1100 volts 3.5 core 240 mm2 aluminium power cable from aux. t / f to acdb 29 650 / 1100 volt 3.5 core 70 mm2 aluminium cable for oil filtration set. 30 650 / 1100 volt 4core 16mm2 unarmoured with copper power cable for mldb and other cable required as per contract for 66kv bays. 31 earthing mat material. the earth mat will be designed / quoted for soil resistivity of 50 ?m. in case soil resistivity is more than 50 ?m then the earth mat will be designed for actual soil resistivity. the payment of extra material to be used for earth mat shall be made on pro rata basis. the approximate area of earth mat to be laid is given in the corresponding columns of the substations. however, item will remain a lot item. ( 4300 sq. meter ) 32 computer system: a. computer sytem ( sff ) with intel core i5, 9th generation processor, 8 gb ram, 1 tb hdd, 19.5 display with ups 33 b. mono chrome multi functional printer, a 4, 25 ppm, wi fi 34 fire fighting equipments asper section 6i ) 22.5 kg capacity fe co2 type, trolley mounted 35 ii ) 25 kg capacity fe dcp type, trolley mounted 36 iii ) dcp 9 kg capacity, wall mounted 37 iv ) fe co2 6.5 kg capacity, wall mounted 38 v ) dcp 6 kg capacity, wall mounted 39 vi ) foam type 9 litre capacity, wall mounted 40 vii ) water co2 9 litre, wall mounted 41 viii ) fire buckets ( 12 nos. with stand in one set ) 42 complete lighting of control room building , switch yard area, road and street as per section 7 of the specification.a ) supply and installation of 2 fittings of 240w led lamps with all accessories for complete lighting of outdoor switch yard area as per clause 16.0 of section 7 of the specifications. 43 b ) supply and installation of 35w led tube on tubular steel poles along with the boundary wall at a distance of 30 meter as per clause 16.0 of section 7 of the specification 44 c ) complete lighting of road and street by providing 90w led lamps on tubular steel poles at a distance of 15meter along the roads and streets as per clause 16.0 of section 7 of the specification. 45 d ) supply and installation of post top lantern 40w led lamps with all complete accessories at the entrance gate of sub station. 46 e ) supply and installation of 40w led lamps with all complete accessories on corners of control room building. 47 complete substation automation system of 66 / 11kv substations including hardware ( along with transducers ) for 8 no. 66kv present bays and software ( for 5 no. present bays as well as 3 no. future bays ) along with associated equipment for the bays ( bay as defined in the technical specification, sec sub station automation system ) as per technical specificationnote: signals from protection relays in 11kv incomer would also be wired to substation automation system ( sas ) 48 high wall type split ac unit of 2 ton capacity for scada room ( as per technical specification ) 49 high wall type split ac unit of 2 ton capacity for c&r panels in electrical room. 50 high wall type split ac unit of 2 ton capacity for battery room. 51 bolted type 11kv single tension string assembly with 3 numbers anti fog type disc insulators ( e&m strength 9000 kg ) per string with all hardware accessories including ball & socket connections and tension clamp sets suitable for twin zebra conductor. alternatively the bidder may quote silicon polymer composite insulator string in place of disc insulators . 52 66 kv bolted type single tension string assembly with 6 numbers anti fog type disc insulators ( e&m strength 9000 kg ) per string with all hardware accessories including ball & socket connection and tension clamp set suitable for single zebra conductor. alternatively the bidder may quote silicon polymer composite insulator string in place of disc insulators. 53 66 kv bolted type single suspension string assembly with 5 numbers anti fog type disc insulators ( e&m strength 9000 kg ) per string with all hardware accessories including ball & socket connections and suspension clamp set suitable for single zebra conductor. alternatively the bidder may quote silicon polymer composite insulator string in place of disc insulators. 54 boltless c type wedge connectors matching with conductor size. 55 copper lugs glands, pvc ferrules for control cabling. 56 fibrecleats, aluminium clamps, bolts, nuts, washers etc., for fixing control cables in trenches. 57 galvanized iron perforated tray with side coupler plate bolts, nuts, washers and clamps etc. of size 75x25x2 mm, 150x25x2mm, 100x25x2mm etc. & g.i. conduits of 50mm / 100mm dia from equipment to main trench as per section 7, switchyard erection. 58 acsr zebra conductor 59 aac tarantulla condoctor 60 7 / 3.15 gs earthwire 61 spacers for twin zebraconductor 62 u bolt 20mm dia 63 mandatory spares for hardware / mechanical / electrical auxiliaries to be supplied. 10 % of the finally approved quantities for item mentioned from sr. no. 51 to 53. 64 item for associated structure work‘lattice type steel structure for 66kv ais s / stn. jaindapur. supply of material, preparation of fabrication drawing, galvanizing and delivery of lattice type steel structure for tower and beams for 66 / 11kv switchyard fabricated from steel conforming to is:2062 including nuts bolts gusset plates foundation bolts and other accessories as per drawings supplied by the owner.a ) . main s / stn. tower and beama ) tower type ct 4 65 b ) tower type ct 5 66 c ) tower type ct 6 67 d ) tower type ct 8 68 e ) beam type cb 6 69 f ) beam type cb 7 70 g ) tower type dt 2 71 h ) tower type dt 3 72 i ) beam type db 2x 73 b. equipment structurea ) 66 kv ct drg. no. htd / st 88r 74 b ) 66 kv nct drg. no.htd / st 145 ( if required ) 75 c ) 66 kv pt drg. no. hhw / st 66 76 d ) 66 kv surge arrestor drg. no. htd / st 89 77 e ) 66 kv isolator drg. no. htd / st 87r 78 f ) 66 kv l&e switch drg. htd / st 87r 79 g ) 11 kv nct drg. htd / st 149 ( if combined structure used ) 80 h ) 11 kv nct drg. htd / st 88r ( if required ) 81 1. earth work 1.1. earth filling with good earth ( as per satisfaction of executive engineer / civil works division ) , laying in layers ( as per specification ) , dressing, including carriage, irrespective of lead, loading, unloading, watering and compaction in layers with roller including compensation of earth complete in all respect. 82 foundationssupply of labour, t&p, material and construction of rcc footings & pedestals etc. for steel gantry and equipment structures complete in all respects as per technical specifications & drawings attached with the tender document including cost of excavation, concreting, cement, reinforcement steel, form work, grouting, holding down bolts, backfilling etc.and other items not mentioned herein but required for the completion of work.a. gantry towers 66kv sidei ) ct 4 83 ii ) ct 5 84 iii ) ct 6 85 iv ) ct 8 86 33kv sidei ) dt 2 87 ii ) dt 3 88 b. equipment 66kv sidei ) 66kv la 89 ii ) 66kv cvt 90 iii ) 66kv nct 91 iv ) 66kv ct 92 v ) 66kv l&e & isolator 93 11kv sidei ) 11kv nct 94 3. breaker foundationdesign, engineering, supply of labour, material, equipment & const. of foundations for 66kv sf 6 circuit breaker including all associated works pcc, rcc, structural steel, steel reinforcement & any other item not specifically mentioned herein but reqd. for completion of work as per tech. spec.66 kv breaker foundation 95 4. capacitor bank foundationsdesign, engg. & supply of labour, material & construction of foundations for following rating capacitor bank with capacitor unit ( with allied equipments ) & series reactor etc. including chain link fencing 1.8m height around cap. bank complete in all respect including any other items not specifically mentioned herein but required for completion of job as per technical specification.4800kvar 11kv capacitor bank 96 5. transformer foundation5.1 design, engg., supply of labour, material and construction of t / f foundation including radiator foundations etc. complete transformer foundations including all associated works, rcc, pcc, reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications and hvpnl drawing. in case additional foundation is / are required as per approved equipment drawing, the same shall be constructed by the successful bidder without any extra cost to hvpnl. such drawing ( s ) shall, however, be got approved from hvpnl.11 / 0.4kv 200kva station t / f 97 5.2 construction of transformer foundation including all associated works, rcc, pcc, reinforcement steel, misc. structural steel and other items not mentioned herein but required for completion of work as per technical specifications & drawing attached. in case extra foundation ( s ) has / have to be constructed ( as per approved t / f drawing ) to complete the job, nothing extra would be paid on this count.i. 12.5 / 16 mva 66 / 11 kv t / f foundation 98 6. cable trenchessupply of labour, material such as cement, reinforcement steel, gi angles, flats, pcc & brick pillars below cable trenches for construction of out door cable trenches ( odct ) of required depth / type with pre cast rcc covers including associated works like cable trench culverts crossings for roads and sump pit cum pump chamber with 2hp motor of reputed make, starter, volt meter, amp meter etc. as per approved trench layout plan, hvpnl drgs. & tech. specs. complete in all respect. 99 7.site surfacing7.1providing, supplying and laying 100mm thick pcc ( 1:4:8 ) using 20mm nominal coarse aggregates and spreading 100mm thick layer of 40mm nominal size uncrushed / crushed / broken stone pebbles over the pcc including construction of toe wall ( exposed wall plastered with cement mortar 1:5 ) to hold 40mm single size uncrushed / crushed / broken stone pebbles wherever required in the bays covered under the present scope as detailed in the gelo & instructions of concerned executive engineer / civil works division. 100 7.2 providing, supplying & laying two layers of uncrushed / crushed / broken stone / pebbles gravel fill. the first layer after compaction shall make min. 50mm thickness course / layer of 40mm nominal size, including dressing, rolling & compaction complete as per specs., gelo and instructions of xen / cwd. 101 8. roads & pcc pavement8.1supply of labour, material and construction of cement concrete roads and walkways / shoulders from nh / sh / etc. to switch yard / switch house building as per gelo / clo as per sectional detail drawing no. hcd / sk 181 r1 and technical specification.i. 6.0m wide 102 ii. 3.66m wide 103 iii. pcc in front and rear of parking area of sh building as per tech. specification and drawing hcd / sk 172. 104 9.road culvertsdesign, engineering and const. of pipe culvert ( s ) at suitable locations under the approach road ( from main pwd / huda / municipal / village road to the sub station entry point ) including, cost of labour, material complete in all respects as per i.r.c. standards. 105 10. boundary wall10.1 supply of labour, material and construction of front, c & u / c boundary walls including main gate foundations as per gelo / clo, technical specifications. & hvpnl drg. hcd / ts 1176 r1 including excavation backfilling, lean & dpc complete in all respect.i. 6 ft. high with gi barbed wire on angles at top. 106 ii. 4½ ft. high front wall with grill at top. 107 iii. 4½ ft. side wall with gi barbed wire 108 10.2 supply of labour, t&p, material and construction of front, side & u / c boundary walls including main gate ( s ) ( brickwork below dpc level ) as per gelo / clo, tech. spec. & hvpnl drawings complete in all respects. 109 11. u / c fencing & gatesproviding & fixing chain link fencing including foundations, gi angle iron posts and gate ( s ) complete as per electrical layout & tech. spec. & as per drawing attached. 110 12. drainage–cum rain harvesting system12.1supply of labour, material for construction of 1 no. recharge structure with bore well as per hvpn drawings & specs. complete in all respect. the location of recharge structure shall preferably be located on corner ( s ) of the substation and shall be got decided from the concerned xen / civil works division on the basis of surroundings of the substation ( s ) . in case ground water table is less than 8m from fgl, rain harvesting well shall not be constructed ( the drainage system with sump pit is to be constructed as per item mentioned below ) . 111 12.2 the successful bidder shall evolve design & drawing for drain, manholes with rcc covers andsettlement tankincluding preparation of drainage layout drawing for disposal of rain water from building’s roof top & switch yard ( s / stn. ) area into bore well in such a way that there shall be no ponding of water on the roof and switch yard ( s / stn. ) . the layout so developed shall be got approved from the employer. the location of sump pit cum pump chamber shall preferably be located on corner ( s ) of the s / stn. and shall be got decided from the concerned xen / civil works division on the basis of surroundings of the substation ( s ) . the successful bidder will also supply labour and material for construction of 1 no.sump pit cum pump chamber as per hvpnl drgs. & provide one no. non clog pump ( s ) of 5hp of reputed make capacity with main switch, starter, volt meter, amp. mtr. etc. ( for each sump pit ) for disposal of excess water to outfall point. any other item ( s ) not mentioned herein but is / are required for completion of works shall be done by the successful bidder without any extra cost to the employer. 112 13. control room buildingsupply of labour, material & construction of control room building complete in all respect as per tech. specs. & approved drgs. attached including exterior & interior acrylic emulsion paint, all internal services like water supply including supply & providing of 5000ltr. capacity triple layered sintex / diplast pvc tank, sewerage system, staircase, electrification including wiring, modular switches, maximum 20w 4ft. long led tubes with fittings minimum 1960 lumens, ceiling / exhaust fans & 4 no. 2t split acs, finishing, plinth protection, indoor trenches, trench covers, soakage pit near the switch house building, connection of sewerage system to soakage pit / sewerage system of local authorities ( as applicable ) , connection to main water supply system of local authority / submersible bore ( as applicable ) etc. & any other item not mentioned herein but reqd. for completion of works. the successful bidder shall also provide water supply connection from bore well / huda / municipal / public health or panchyat water supply scheme ( as per available source of portable water ) to the control room bldgs. without any extra cost of hvpnl. 113 14. rcc m 20 inclusive of labour, material, shuttering, steel reinforcement etc. complete in all respects to compensate excess quantity required to be executed due to difference in existing ground level and the formation level to be fixed after contouring or difference on account of revised drg issued at the time of construction and the tender drg. 114 15. barbed wire with rcc postsupply of labour, t&p and material for providing barbed wire fencing with rcc post including gates etc. complete in all respect as per clo, technical specification and attached drawings....
35077841 tender for extension of pa to md office. ( civil work ) 1.01 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) , including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 50 cum 1.02 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work below plinth level and up to floor iv level : 6.1.6 ) 1:4:8 ( 1 cement : 4 coarse sand ( zone iii ) : 8 graded stone aggregate 40 mm nominal size ) 3.9 cum 1.03 centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete 10 sqm 1.04 suspended floors, roofs, landings, balconies 10 sqm 1.05 lintels, beams, plinth beams, girders, and cantilevers 10 sqm 1.06 providing and laying damp proof course with cement concrete 1:1:2: 4 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) 40 mm thick 2 sqm 1.07 brick work with common burnt clay non modular bricks of class designation 12.5 in foundation and plinth in : cement mortar 1:6 ( 1 cement: 6 coarse sand ) ( derived rate ) ( 7.40 7.39 ) 5 cum 1.08 brick work with common burnt clay nonmodular bricks of class designation 12.5 in super structure above plinth level up to floor four level in all shapes and sizes in : cement mortar 1:6. 8 cum 1.09 half brick masonry with common burnt clay non modular bricks of class designation 7 .5 in superstructure above plinth level up to floor iv level. cement mortar 1 :4 ( 1 cement :4 coarse sand ) 1.1 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level , excluding the cost of centering, shuttering, finishing and reinforcement with 1 :1.5:3 ( 1 cement coarse sand ( zone 111 ) : 3 graded stone aggregate 20 mm nominal size ) . 7 cum 1.11 15 mm thick cement plaster on the rough side of single or half brick wall of mix. cement mortar 1:6 ( 1 cement : 6 fine sand ) 38 sqm 1.12 12mm thick cement plaster of mix 1:6 on the brick wall 1:6 ( 1cement : 6 fine sand ) 38 sqm 1.13 providing and laying of base course of floors consisting of 100 mm thick cement 1 :8 :16 and 100 mm sand or stone filling re compacting excavated soil in plinth under floors, including watering, ramming, consolidating and dressing complete 17 sqm 1.14 painting top of roofs with bitumen of approved quality @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kwrosene oil complete with residual type petroleum bitumen of grade vg io 17 sqm 1.15 10 cm thick ( average ) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cow dung ) and covered with flat tiles bricks, grouted with cement mortar 1:3 ( 1 cement: 3 fine sand ) mixed with 2 % of integral water proofing compound by weight of cement and finished neat : with common burnt clay non modular brick tile of class sqm designation 12.50 17 sqm 1.16 providing & fixing on wall face unplasticised rigid pvc rain water pipe conforming to is : 13592b type a, including jointing with seal ring conforming to is : 5382, 10 mm gap for thermal expansion, ( i ) single sockted pipes. 110mm diameter 6 rmtr. 1.17 providing & fixing on wall face unplasticised rigid pvc moulded fittings / accessories for unplasticised rigid rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, 10 mm gap for thermal expansion. pipes. bend 87.5 degree 110 mm bend 4 each . 10 1.18 wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade .two or more coats on new work 38 sqm 1.19 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: new work ( two or more coats ) over and including water thinnable priming coat with cement primer 38 sqm 1.2 providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement:2 coarse sand : 4 stone aggregate 10 mm and down gauge ) , including finishing with cement mortar 1:3 ( 1 cement: 3 fine sand ) as per standard design : in 75x75 mm deep chase. 10 mtr. 1.21 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate of 20 mm nominal size ) over p.v.c. sheet 1 mx 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand ) and a coat of neat cement, rounding the edges and making finishing the outlet complete . 2 each 1.22 dismantling stone slab roofing over wooden karries or r.c.c. cum battens ( dismantling karries and battens to be paid for separately ) , including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 17 cum 1.23 demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge 5 cum 1.24 steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect note: reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement . thermo mechanically treated bars of grade fe 500d or more 275 kg. 11 1.25 painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. 18.2 sqm 1.26 applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. 18.2 sqm 1.27 providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured ) . panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: kiln seasoned and chemically treated hollock wood 1.5 sqm 1.28 providing & fixing in place door frame of section 170x58mm metre made of gpsp sheet ( is277 ) constructed from sheet thickness 1.2mm with a single rebate of 58mm duly filled with puf and finished with powder coating in regular ral shades as desired by engineer incharge . frame should be coated with pure polyester / epoxy polyester powder coating having thickness of 60 80 micron and provided with 3mm thick hinge enforcement plates....
34688111 tender for distempering, painting and exterior emulsion paint in residential buildings and boundary walls of dcrtpp colony, yamuna nagar...
34658494 distempering, painting and exterior emulsion paint in residential buildings and boundary walls of dcrtpp colony, yamuna nagar...
33572305 supply of various civil & ph items 1 aluminum dead lock 65mm, 6 levers 2 aluminum aldrop (sliding door bolt) 10” 3 door closer 4 tower bolt aluminum 6” 5 aluminum handle “d” type with plate 8” (wooden door) 6 aluminum handle “d” type with plate 6” (wooden door) 7 door hinge (kabje) ss 4” 8 door hinge (kabje) ss 5” 9 door hinge (kabje) aluminum 4” 10 door hinge (kabje) ss 3” 11 nail 1 inch length 2d size 12 nail 1.25 inch length 3d size 13 nail 1.50 inch length 4dsize 14 nail 2 inch length 6d size 15 nail 2.25 inch length 7d size 16 nail 2.50 inch length 8d size 17 nail 3 inch length 10d size 18 nail 3.25 inch length 12d size 19 nail 3.50 inch length 16d size 20 nail 4 inch length 20d size 21 screw 6x25 22 screw 10x25 23 screw 6x13 24 screw 8x19 25 screw 8x25 26 screw 10x219 27 screw 6x32 28 screw 6x19 29 screw 3.5x38 30 screw 8x38 31 screw 35x8 gypsum 32 screw 25x6 gypsum 33 screw 20x5 inch gypsum 34 pvc pipe 50mm 6 kg (length 20 ft) 35 pvc pipe 63mm 6 kg (1 length 20 ft) 36 pvc bend elbow 50mm 37 pvc tee 50mm 38 pvc bend elbow 63mm 39 pvc tee 63mm 40 gi bend elbow 15mm 41 gi tee 15mm 42 gi union 15mm 43 gi socket reducer 15x20mm 44 gi socket reducer 15x25mm 45 gi hex nipple 15mm 46 gi nipple 15mm 2” 47 gi nipple 15mm 4” 48 gi nipple 15mm 6” 49 gi bend elbow 20mm 50 gi tee 20mm 51 gi union 20mm 52 gi socket reducer 20x25mm 53 gi socket reducer 20x32mm 54 gi hex nipple 20mm 55 gi nipple 20mm 2” 56 gi nipple 20mm 4” 57 gi nipple 20mm 6” 58 gi pipe 20mm c class (1 length 20ft) 59 gi bend elbow 25mm 60 gi tee 25mm 61 gi union 25mm 62 gi socket reducer 25x32mm 63 gi socket reducer 25x40mm 64 gi socket reducer 25x50mm 65 gi hex nipple 25mm 66 gi nipple 25mm 2” 67 gi nipple 25mm 4” 68 gi nipple 25mm 6” 69 gi pipe 25mm c class (1 length 20ft) 70 gi bend elbow 32mm 71 gi tee 32mm 72 gi union 32mm 73 gi socket reducer 32x50mm 74 gi socket reducer 32x65mm 75 gi hex nipple 32mm 76 gi nipple 32mm 2” 77 gi nipple 32mm 4” 78 gi nipple 32mm 6” 79 gi pipe 32mm c class (1 length 20ft) 80 gi pipe 40mm c class (1 length 20ft) 81 gi bend elbow 50mm 82 gi tee 50mm 83 gi union 50mm 84 gi socket reducer 50x65mm 85 gi hex nipple 50mm 86 gi nipple 50mm 2” 87 gi nipple 50mm 4” 88 gi nipple 50mm 6” 89 gi pipe 50mm c class (1 length 20ft) 90 gi dead plug 50mm 91 gi socket 50x50mm 92 nrv 50mm brass 93 bottle trap (with internal partition) 32mm size with 250 x 190mm long wall connection pipes & wall flange. 94 ball valve 15mm 95 ball valve 25mm 96 ball valve 50mm 97 pillar cock, kup chr 35001pm 98 gi elbow 25mm 99 gi socket 25mm 100 gi nipple 4” 101 gi hex nipple 25 mm 102 dead plug 25 mm 103 float valve 15mm (brass) 104 dhaga (for plumbing work) 105 safeda gi pipe paste 500gm 106 evacuated tube collector (water heating) 107 silicon rubber ring for etc solar water heater vacuum tubes 108 solar water heater temp & pressure gauge, cb f 24bm zi 2c 109 cutting wheel 4” 110 hexa blade (double side) 111 acrylic distemper wall paint (obd) 20ltr. per balti 112 apex for exterior paint 20ltr per balti 113 royal luxury paint 20 kg per balti 114 wall putty white 20kg per bag 115 snowcem peach colour 30 kg per bag 116 snowcem super white 25 kg per bag 117 wire brush 118 phase 3 no. half round 119 brass lock, 65mm, 04 lever (for almirah) 120 outgeek windproof, dustproof door window frame adhesive brush strip (l 10 mtr) 121 enamel black paint, 20 ltr pack 122 old dhoti piece, large size 123 brush 3” 124 tarpin oil, 05 ltr/pack 125 chicken wire mesh (jalli), 30 mtr 126 enamel white paint 20ltr (per balti) 127 sure seal waterproofing all rounder 20 ltr. 128 white enamel paint, 20 ltr drumwhite enamel paint, 20 ltr drum white enamel paint, 20 ltr drumwhite enamel paint, 20 ltr drum white enamel paint, 20 ltr drum white enamel paint, 20 ltr drum white enamel paint, 20 ltr drum white enamel paint, 20 ltr drum 129 acrylic distemper paint (obd), 20 ltr drum 130 apex paint, 20 ltr drum 131 plastic emulsion paint, 20 ltr drum plastic emulsion paint, 20 ltr drum plastic emulsion paint, 20 ltr drum plastic emulsion paint, 20 ltr drum plastic emulsion paint, 20 ltr drum plastic emulsion paint, 20 ltr drum plastic emulsion paint, 20 ltr drum 132 pu wall paint with hardener 133 putty, 40 kg...
33165187 tender for group b: station uplift works at nrpl rewari. 1 wall painting with premium acrylic emulsion paint of interior grade, having voc ( volatile organic compound ) content less than 50 gra ms / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : 2 two coats 3 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade : 4 old work ( two or more coats applied @ 1.43 ltr / 10 sqm ) over existing cement paint surface. 5 supplying, fabricating and fixing m.s. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc ., for struts, chain link fencing posts as per drawing includinggate, ladders, safety grills, walkways, collapsible gate, signboar ds, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying twocoats of epoxy paint epilux 155 high build enamel over a coat ofepilux 610 primer of m / s berger or any other approved equivalen t make as permanufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing a nchor plates, bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.c omplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directio ns of the engineer in charge. ( excluding the cost of concrete work ) . 6 providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, b uffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts comple te, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of require d size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the engineer in charge. [ note : for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, f asteners etc. ] 7 providing and fixing 100mm wide vertcal fabric blind system of vista / mac / trac of approved make & shades complete along with standa rd accessories in required design / shade as per manufacturers recommendations, specification and directions of the engineer in char ge. 8 providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and f ixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing r equired door fittings, all complete as per directions of the engineer in charge. [ note: door handle, lock and stopper etc.to be paidseparately ] . 9 providing and fixing sensor based sliding glass door system of approved make for main entrance door of size 2.0m x 2.4m, comprising of d.c. motor controller, transmission belt, aluminum profile, sensor and necessary accessories including 10mm thick toughened glasswith required framing, fittings, accessories etc.complete in all respect as per manufacturers specifications, drawings and direc tions of the engineer in charge. 10 providing and fixing luxalon 75c & 225c un perforated aluminium panel coloured ceiling manufactured by m / s. hunter douglas india or any other approved equivalent brand, each panel consisting of 75 / 225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy aa 5050 ( al.mg ) , each panel to abut each other with a narrow v groove, cl ipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres madeof double baked enamelled aluminium alloy aa 5050 ( al.mg ) black with cutouts to hold the panels in a module of 75 mm closed at a di stance of 1.25 metre, each panel carrier suspended by means of g.i. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complet e as per manufacturers recommendation and directions of the engineer in charge. [ note: measurement shall be made wall to wall witho ut any deduction for openings, for payment purpose ] . 11 repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 sqm including cutting the patch in proper shape, raking o ut joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable area outside ow nders premises, all complete as per directions of the engineer in charge : 12 with cement mortar 1:4 ( 1 cement : 4 fine sand ) 13 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete. 14 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade : 15 new work ( two or more coats applied @ 1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 16 applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 17 water thinnable cement primer 18 providing and fixing double scaffolding system ( cup lock type ) on the exterior side, up to seven story height made with 40 mm dia m. s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s.clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for therequired duration as approved and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connect ion with the building etc wherever required for inspection of work at required locations with essential safety features for the work men etc. complete as per directions and approval of the engineer in charge. the elevational area of the scaffolding shall be measure d for payment purpose. the payment will be made once irrespective of duration of scaffolding. [ note: this item to be used for mainte nance work judicially, necessary deduction for scaffolding in the existing item to be done ] 19 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratch es etc. complete. 20 lettering with black japan paint of approved brand and manufacture. [ note: unit ea shall mean per letter per cm height ] . 21 external work: providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water suppl y including all cpvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step cpvc solvent cement, t renching, refilling & testing of joints complete as per directions of the engineer in charge : 22 25 mm nominal dia pipes 23 32 mm nominal dia pipes 24 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank ( ref. make: sintex or approved equivalent ) , i s:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank. 25 providing and fixing ball valve ( brass ) of approved quality, high or low pressure, with plastic floats complete : 26 25 mm nominal bore 27 demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per the directionsof engineer in charge. [ notes: ( 1 ) dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. ( 2 ) providing of necessary covers / barricades around the work area shall be done prior to dismantling operations ] : 28 nominal concrete 1:3:6 or richer mix ( including equivalent design mix ) 29 demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of engineer in charge. [ notes: ( 1 ) dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. ( 2 ) providing of necessary covers / barricades around the workarea shall be done prior to dismantling operations ] 30 dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete a nd stacking within 50 metres lead : 31 of area beyond 3.0 sq. metres 32 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : 33 for thickness of tiles 10 mm to 25 mm 34 demolishing r.c.c. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lea d of 1.0 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. 35 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the engineer in charge, beyond 50 m initial lead, for a ll leads including all lifts involved. 36 providing and laying flamed finish granite stone slab ( jet black, cherry red, elite brown, cat eye or equivalent ) flooring in requir ed design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings wit h 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cemen t slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. a ll complete as specified and as directed by the engineer in charge. 37 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is:733 and is:1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neopre ne gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the engineer in charge. [ note: glazing, paneling and dash fasteners to be paid for separately ] : 38 for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittin gs wherever required including the cost of epdm rubber / neoprene gasket required. [ note: fittings shall be paid for separately ] : 39 polyesterpowdercoatedaluminium ( minimum thickness of polyester powder coating 50 micron ) 40 with float glass panes of 5.50 mm thickness 41 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket et c. complete as per the architectural drawings and directions of the engineer in charge. [ note: cost of aluminium snap beading shall be paid in basic item ] : 42 providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to is:6315, having brand logoembossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivotand single piece m.s. sheet outer box with slide plate etc. complete as per directions of the engineer in charge. : 43 with stainless steel cover plate minimum 1.25 mm thickness 44 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in foundation and plinth in : 45 cement mortar 1:4 ( 1 cement : 4 coarse sand ) 46 finishing : 47 15 mm cement plaster on the rough side of single or half brick wall of mix : 48 1:4 ( 1 cement : 4 fine sand ) ...
32709443 providing and fixing of rcc pipe np 2 vertically in shape of vertical pole after excavation and filled with earthincluding providing two coats exterior acrylic emulsion paints on vertical rcc pipe pole from sector 58 to 115, gurugram and all other works contingent thereto...
32579697 annual maintenance of sports complex sector 3 u / e panchkula ( providing and laying of 12mm cement plaster, chequered precast cement concrete tiles and painting on cement plaster surface with acrylic emulsion paint complete in all respect in sports complex sec 3 u...
32393009 distempering, painting and exterior acrylic emulsion paint in fh 5 type 2 canal colony gurugram 1 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. complete in all respect ( hsr item no. 30.22 ) 2 distempering with 1st quality acrylic distemper ( ready mix ) having voe content less than 50 grams / litre of approved brand and manufacture to give an even shade: ( hsr item no.30.25.1 ) old work ( one or more coats ) 3 finishing walls with acrylic smooth exterior paint of required shade: old work ( one or more coat applied @ 0.90 litre / 10 sqm ) . ( hsr item no30.37.2 ) 4 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadecomplete in all respect ( hsr item no.30.28.1 ) one or more coats on old work. 5 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. complete in all respect ( hsr item no. 5.45 ) 6 12 mm cement plaster 1:4 fine sand ( 1cement +4fine sand ) complete in all respect ( hsr item no.11.5.3 ) 7 demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. complete in all respect ( hsr item no. 5.14 ) 8 painting top of roofs with bitumen of approved quality @ 17kg per 10sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil completewith residual type petroleum bitumen of grade vg 10 complete in all respect ( hsr item no.9.10.1 ) 9 providing and laying pressed clay tiles ( s perapproved pattern 20mm nominal thickness of approvedsize ) on roofs joined with cement mortar 1:4 ( 1cement :4 coarse sand mixed with 2% integral water proofing compound, laid overa bed of 20mm thick cementmortar 1:4 ( 1 cement ; 4 corse sandand finished neatcomplete . ( hsr item no. 9.15 ) ....
32379267 providing and fixing of rcc pipe np 2 vertically in shape of vertical pole after excavation and filled with earthincluding providing two coats exterior acrylic emulsion paints on vertical rcc pipe pole from sector 58 to 115, gurugram and all other works contingent thereto....
32365927 tender for supply of painting items reg white enamel paint, 20 ltr drum acrylic distemper paint (obd) 20 ltr drum apex paint for exterior, 20 ltr drum plastic emulsion paint, 20 ltr drum polyurethane (pu) wall paint (with hardener) wall putty, 40 kg...
32348108 bids are invited for plastic emulsion paint is:15489 (q3) total quantity : 20...
32050197 distempering, painting and exterior acrylic emulsion paint in fh5 type 2 canal colony gurugram...
31995001 bids are invited for oil bound distemper , plastic emulsion paint , exterior decorative paint , cp brass bib cock , cp brass angle cock , cp brass washbasin mixer , ptmt bib tap , ptmt pillartap ,ptmt stop cock , ptmt ball cock , pvc cistern , pvc seatcover , pvc connection , pvc waste pipe , cp waste total quantity : 2102...
31981637 upgradation of 66 kv substation sadhaura to 220 kv level 1 a ) 100 mva 220 / 66 kv power transformer along with 10%extra t / f oil b ) nifpes for 100 mva t / f 2 a ) 100 mva, 220 / 33 kv power transformer along with 10%extra t / f oil with b ) nifpes for 100 mva t / f 3 25 / 31.5 mva, 66 / 11 kv power transformer 4 12.5 / 16 mva, 66 / 11 kv power transformer ( to be provided by hvpnl ) 5 220 kv sf 6 breaker along with 20% extra sf 6 gas 6 220 kv isolator with e / switch 7 220kv isolator without e / switch 8 220 kv surge arrestor 9 220 kv post insulator 10 220 kv cts for line & bus coupler ( 1200 800 400 / 1 1 1 1 1a ) 11 220 kv ct for transformer ( 450 300 / 0.577 1 1 1 1a ) 12 220 kv cvt 13 220kv c&r panelsline protection & circuit breaker control panel ( with auto reclose ) 14 transformer protection& ckt breaker control panel ( without auto reclose ) for both hv & lv side of 220 / 66kv t / f. ( 1 set for each t / f ) 15 transformer protection& ckt breaker control panel ( without auto reclose ) for both hv & lv side of 220 / 33kv t / f. 16 bus coupler cum bus bar protection & ckt breaker control panel without auto reclose ( double bus bar ) 17 220 kv nct ( 450 300 / 1a ) 18 220 kv pt 19 66 kv sf 6 breaker with 20% extra sf 6 gas 20 66 kv isolator with e / switch 21 66 kv isolator without e / switch 22 66 kv surge arrestor 23 66 kv ct for line ( 600 300 150 / 1 1 1a ) 24 66 kv ct for bus coupler ( 1500 1000 / 1 1a ) 25 66 kv ct for transformer i / c ( 1500 1000 / 0.577 1 1 1a ) 26 66 kv ct for 12.5 / 16 mva, 66 / 11kv transformer ( 300 200 150 / 0.577 1 1a ) 27 66 kv ct for 25 / 31.5 mva, 66 / 11kv transformer ( 300 200 150 / 0.577 1 1a ) 28 66kv pt 29 66kv nct for 220 / 66kv t / f ( 1500 1000 / 1a ) 30 66 kv nct for 25 / 31.5 mva, 66 / 11kv t / f ( 300 200 150 / 1a ) 31 66 kv nct for 12.5 / 16 mva, 66 / 11kv t / f ( 300 200 150 / 1a ) 32 66 kv cvt for line 33 66 kv c&r panelsline protection & circuit breaker control panel ( without auto reclose ) 34 transformer protection& ckt breaker control panel ( without auto reclose ) for lv side of 220 / 66 kv t / f. 35 transformer protection& ckt breaker control panel ( without auto reclose ) for 25 / 31.5 mva.66 / 11kv power t / f. 36 transformer protection& ckt breaker control panel ( without auto reclose ) for 12.5 / 16 mva.66 / 11kv power t / f. 37 bus coupler protection & ckt breaker control panel without auto reclose ( double bus bar ) 38 time synchronizationequipment 39 33 kv vcb 2000a for bus coupler & incomer 40 33 kv vcb 630a 41 33 kv capacitor vcb 630a 42 33 kv la’s 43 33 kv isolator 630a 44 33 kv isolator 2000a forbus coupler &incomer 45 33 kv l&e switch for lines & cap. bank 630 amp 46 33 kv bus pt 47 33 kv line cum capacitor ct 400 300 / 5 1a 48 33 kv i / c transformer ct 2000 1000 / 0.577 5 5 1a 49 33 kv bus coupler ct 2000 1000 / 5a 50 33 kv nct ( 2000 1000 / 5a ) 51 33kv c&r panels33kv line protection & circuit breaker control panel ( without auto reclose ) 52 33kv t / f incomer c&r panel without autoreclose alongwith 1 no. sem 53 33 kv ckt. breaker control panel without auto reclose and capacitor protection panel 54 33kv bus coupler protection & ckt breaker control panel without auto reclose ( double bus bar ) 55 11 kv nct for 25 / 31.5 mva, 66 / 11kv t / f ( 1800 900 / 5a ) 56 11 kv nct for 12.5 / 16 mva, 66 / 11kv t / f ( 1800 900 / 5a ) 57 11 kv la 58 11 kv 13 panel board ( 1250a ) with one sem on each t / f i / c panel. 59 11 kv 15 panel board ( 2000a ) with one sem on each t / f i / c panel. 60 1x21.744mvar33 kv capacitor bank along with str. & allied equipment ( nct, series reactor etc., ) as per specification. 61 3.4mvar 11kv automatically switched capacitor bank along with allied equipment for 12.5 / 16 mva, 66 / 11kv transformer 62 6.804 mvar 11kv automatically switched capacitor bank along with allied equipment for each 25 / 31.5 mva, 66 / 11kv transformer 63 220v 200 ah battery 64 220 v battery charger 65 220 v d.c.d.b. suitable for 200ah battery 66 415 v lt ac mccb board 500 a 67 11 / 0.4 kv station transformer 200 kva with csp. 68 100 kva dg set along with associated accessories 69 1.1 kv copper control cable armoured for 220 kv bays of size2cx6mm2, 7cx4mm2, 4cx4mm2, 2cx4mm2, 16cx2.5mm2, 10cx2.5mm2, 7cx2.5mm2, 3cx2.5mm2 including junction box ( as per section 5 of copper control cables specifications and section 7, switchyard erection ) . 70 1.1 kv copper control cable unarmoured for 66 kv bays of size 2cx6mm2, 7cx4mm2, 4cx4mm2, 2cx4mm2, 16cx2.5mm2, 10cx2.5mm2, 7cx2.5mm2, 3cx2.5mm2 including junction box ( as per section 5 of copper control cables specifications and section 7, switchyard erection ) . 71 1.1 kv copper control cable unarmoured for 33 kvbays of size 2cx6mm2, 7cx4mm2, 4cx4mm2, 2cx4mm2, 16cx2.5mm2, 10cx2.5mm2, 7cx2.5mm2, 3cx2.5mm2 including junction box ( as per section 5 of copper control cables specifications and section 7, switchyard erection ) . 72 650 / 1100 volts 3.5 core 240 mm2 aluminum power cable from aux. transformer to acdb 73 650 / 1100 volt 3.5 core 70 mm2 aluminum cable for oil filtration set. 74 650 / 1100 volt 4 core 16 mm2 armoured copper power cable for mldb and other cable required as per contract for 220kv bays. 75 650 / 1100 volt 4 core 16 mm2 unarmoured copper power cable for mldb and other cable required as per contract for 66kv bays. 76 650 / 1100 volt 4 core 16 mm2 unarmoured copper power cable for mldb and other cable required as per contract for 33kv bays. 77 11kv 1cx1000 mm2aluminum cable for t / f to 11kv incomer with termination kit for both ends ( 2 runs per phase for each transformerallocating them 1 runs per phase for each 11kv i / c ) for 12.5 / 16 mva t / f and 4 runs per phase for each transformerallocating them 2 runs per phase for each 11kv i / c for 25 / 31.5 mva t / f 78 11 kv power cable xlpe ( aluminum ) 3c x 400sq mm for capacitor bank with termination kit for both ends for cap. bank ( 6.804 mvar ) 79 11 kv power cable xlpe ( aluminum ) 3c x 185 sq mm for capacitor bank with termination kit for both ends for cap. bank ( 3.4mvar ) 80 11 kv power cable xlpe ( aluminum ) 3c x 50 sq mm for station t / f with termination kit for both ends. ( for each stn t / f ) 81 earthing mat material and connectivity of earth mat with existing earth mat. the earth mat will be designed / quoted for soil resistivity of 50o. in case soil resistivity is more than 50o then the earth mat will be designed for actual soil resistivity. the payment of extra material to be used for earth mat shall be made on pro rata basis. the approximate area of earth mat to be laid is given in the corresponding columns of the substations. however, item will remain a lot item. ( aprox. 26400 sq mtr ) 82 fire fighting equipments as per section 6 22.5 kg capacity fe co2 type, trolley mounted 83 25 kg capacity fe dcp type, trolley mounted 84 dcp 9 kg capacity, wall mounted 85 fe co2 6.5 kg capacity, wall mounted 86 dcp 6 kg capacity, wall mounted 87 foam type 9 litre capacity, wall mounted 88 water co2 9 litre, wall mounted 89 fire buckets ( 12 no.s with stand in one set ) 90 supply and installation of 2 fittings of 240w led lamps with all accessories for complete lighting of outdoor switch yard area including all accessories, cables etc. as per clause 16.0 of section 7 of the specifications. 91 complete lighting of road and street by providing 90w led lamps on tubular steel poles at a distance of 15meter along the roads and streets including all accessories, cables etc. as per clause 16.0 of section 7 of the specification 92 ( a ) supply and installation of 35w led tube fitting on tubular steel poles along fencing / boundary wall at a distance of 30 meter including all accessories, cables etc. as per clause 16.0 of section 7 of the specification. 93 ( b ) supply and installation of post top lantern 40w led lamps with all complete accessories at the entrance gate of sub station. 94 ( c ) supply and installation of 40w led lamps with all complete accessories on corners of control room building. 95 high wall type split ac unit of 2 ton capacity for computer room ( as per technical specification ) 96 testing of ium system at nabl accredited lab 97 complete substation automation system for 220 / 66 / 33 kv substations including hardware ( along with transducers ) & software for present bays and software for future bay along with associated equipment for the bays as defined in the technical specification, section sub station automation system ) as per technical specification. the scope for present and future is as under: 220kv bayspresent bays future baysline bays62transformer bays3 bus coupler bay 1 66kv bays line bays 85transformer bays 3166 / 11kv66kv t / f i / c bay2 bus coupler bay1 33kv bays line bays 42transformer i / c bays11bus coupler bay 1 capacitor bay1 98 computer system ( sff ) with intel core i5, 9th generation processor, 8gb ram, 1 tb hdd, 19.5 display with ups. 99 mono chrome multi functional printer, a 4, 25 ppm, wi fi 100 bolted type 220 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connection and tension clamp set suitable for twin tarantula ( string ) . 101 bolted type 220 kv single suspension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connection suitable for twin tarantula ( string ) . 102 bolted type 220 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connections and tension clamp sets suitable for single tarantula ( string ) . 103 bolted type 220 single suspension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connections and suspension clamp sets suitable for single tarantula conductor. 104 bolted type 66 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connection and tension clamp set suitable for twin tarantula ( string ) . 105 bolted type 66kv single suspension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) per string with all hardware accessories including ball & socket connection suitable for twin tarantula ( string ) . 106 bolted type 66 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connections and tension clamp sets suitable for single zebra ( string ) . 107 bolted type 66 single suspension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connections and suspension clamp sets suitable for single zebra conductor ( string ) . 108 bolted type 33 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connection and tension clamp set suitable for twin tarantula ( string ) . 109 bolted type 33 kv single suspension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connection suitable for twin tarantula ( string ) . 110 bolted type 33 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connections and tension clamp sets suitable for single tarantula ( string ) . 111 bolted type 33 kv single suspension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connection suitable for single tarantula ( string ) . 112 bolted type 11 kv single tension string assembly with silicone rubber polymer composite insulators ( e&m strength 9000 kg ) with all hardware accessories including ball & socket connections and tension clamp sets suitable for twin tarantula ( string ) . 113 boltless c type wedge connectors matching with conductor size. 114 copper lugs glands, pvc ferrules for control cabling. 115 fiber cleats, aluminium clamps, bolts, nuts, washers etc for fixing control cables in trenches 116 galvanised iron perforated tray with side coupler plate bolts, nuts, washers and clamps etc. of size 150x25x2 mm, 100x25x2 mm and 75x25x2 mm and g.i conduits of 50 / 100mm diameter from equipment to main trench as per section 7 for switchyard erection. 117 2.5” dia hdd / pvc pipe for 4cx4mm2 control cable from ct, vt to metering system as per section 5, chapter 5. 118 aac tarantula conductor 119 acsr zebra conductor for 66kv line bays and t / f bays only 66kv side 120 7 / 3.15 gs earth wire 121 spacers for twin tarantula / zebra conductor 122 u bolt 20mm dia 123 lattice type steel structure for 220 kv substations sadhura supply of material, preparation of fabrication drawing, galvanizing and delivery of lattice type steel structure for tower and beams for 220 / 66 / 33 kv switchyard fabricated from steel conforming to is: 2062 including nuts bolts gusset plates foundation bolts and other accessories as per drawings supplied by the owner.main substation tower and beamtower type at 1 124 tower type at 3 125 tower type at 4 126 tower type at 6 127 beam type ab 1 128 beam type ab 2 129 beam type cb 6 130 beam type cb 7 131 tower type ct 4 132 tower type ct 5 133 tower type ct 6 134 tower type ct 8 135 beam type dd 1* 136 beam type dd 2* 137 beam type dt 3 138 beam type db 2x 139 tower type dt 2 140 220 kv ct drawing no. htd / st 147 141 220 kv nct drawing no. htd / st 150 142 220 kv pt / cvt drawing no. htd / st 147 143 220 kv surge arrestor drawing no.htd / st – 93r 144 220 kv bus post insulator drawing no. htd / st 116 145 220 kv isolator / l&e drawing no. htd / st 170 146 66 kv ct / cvt drawing no. htd / st 88r 147 66 kv nct drawing no. htd / st 145 148 66kv bus pt drawing. no. hhw / st 66 149 66 kv surge arrestor drawing no. hw / st 89 150 66 kv isolator / l&e drawing no. htd / st 87 151 33 kv la drawing no. htd / st 89r 152 33 kv ct drawing htd / st 88 153 33 kv isolator / l&ehtd / st 110 154 33 kv nct drawing htd / st 88 155 33 kv pt drawing htd / st 88 156 11kv nct drawing no. htd / st 149 ( for 66 / 11kvt / f ) ( if required ) 157 plc terminals ( no. ) 158 plc terminal with prot.coupler ( no. ) 159 wave trap 1250a 160 ltu ( p / p ) ( set. ) 161 48v battery 300ah& battery charger 300ah ( 1 each ) 162 hf cable ( kms ) 163 earth work in filling1.1 earth filling with good earth ( as per satisfaction of executive engineer / civil works division ) , laying in layers ( as per specification ) , dressing, including carriage, irrespective of lead, loading, unloading, watering and compaction in layers with roller including compensation of earth complete in all respect. 164 foundationssupply of labour, t&p, material and construction of rcc footings & pedestals etc. for steel gantry and equipment structures complete in all respects as per technical specifications & drawings attached with the tender document including cost of excavation, concreting, cement, reinforcement steel, form work, grouting, holding down bolts, backfilling etc.and other items not mentioned herein but required for the completion of work.a. gantry towers i ) at 1 165 ii ) at 3 166 iii ) at 4 167 iv ) at 6 168 v ) ct 4 169 vi ) ct 5 170 vii ) ct 6 171 viii ) ct 8 172 ix ) dt 2 173 x ) dt 3 174 b. equipment 220kv sidei ) 220kv la 175 ii ) 220kv isolator / l&e switch 176 iii ) 220kv cvt 177 iv ) 220kv pt 178 v ) 220kv ct 179 vi ) 220kv post insulator 180 vii ) 220kv nct 181 66kv sidei ) 66kv la 182 ii ) 66kv ct 183 iii ) 66kv cvt 184 iv ) 66kv pt 185 v ) 66kv l&e / isolator 186 vi ) 66kv nct 187 33 kv sidei ) 33kv la 188 ii ) 33kv isolator / l&e switch 189 iii ) 33 kv nct 190 iv ) 33 kv ct 191 v ) 33 kv pt 192 3. breaker foundationdesign, engineering, supply of labour, material and construction of breaker foundations including all associated works, rcc, pcc, reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications. i ) 220kv sf 6 breaker 193 ii ) 66kv sf 6 breaker 194 iii ) 33kv vcb 195 4. roadssupply of labour, material and construction of cement concrete roads and walkways / shoulders from nh / sh / etc. to switch yard / switch house building as per gelo / clo as per sectional detail drawing no. hcd / sk 181 r1 and technical specification.i. 6.0m near main road 196 ii.5.0m wide road within substation land 197 iii. 3.66m wide road within substation land 198 5. capacitor bank foundationsdesign, engg. & supply of labour, material & construction of foundations for following rating capacitor bank with capacitor unit ( with allied equipments ) & series reactor etc. including chain link fencing 1.8m height around cap. bank complete in all respect including any other items not specifically mentioned herein but required for completion of job as per technical specification.i. 1x21.744 mvar 33 kv capacitor bank 199 ii. 1x3.4 mvar 11 kv capacitor bank 200 iii. 1x6.804 mvar 11 kv capacitor bank 201 6. road culvertdesign, engineering and const. of pipe culvert ( s ) at suitable locations under the approach road ( from main pwd / huda / municipal / village road to the sub station entry point ) including, cost of labour, material complete in all respects as per i.r.c. standards. 202 7. transformer foundation7.1 design, engg., supply of labour, material and construction of t / f foundation including radiator foundations etc. complete transformer foundations including all associated works, rcc, pcc, reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications and hvpnl drawing. in case additional foundation is / are required as per approved equipment drawing, the same shall be constructed by the successful bidder without any extra cost to hvpnl. such drawing ( s ) shall, however, be got approved from hvpnl.i ) 100mva, 220 / 66 kv t / f foundation 203 ii ) 100mva, 220 / 33kv t / f foundation 204 7.2 construction of transformer foundation including all associated works, rcc, pcc, reinforcement steel, misc. structural steel and other items not mentioned herein but required for completion of work as per technical specifications & drawing attached. in case extra foundation ( s ) has / have to be constructed ( as per approved t / f drawing ) to complete the job, nothing extra would be paid on this account.iii ) 25 / 31.5 mva, 66 / 11 kv t / f foundation 205 iv ) 12.5 / 16 mva, 66 / 11 kv t / f foundation 206 7.3 design, engg., supply of labour, t&p and material including rcc, pcc, reinforcement steel, misc. structural steel & other item ( s ) not mentioned herein but required for the completion of work as per tech. specs. for construction of below mentioned t / f foundations. i ) 200kva 11 / 0.4kv station t / f 207 ii ) 100kva dg set 208 8. outdoor cable trenchessupply of labour, material such as cement, reinforcement steel, gi angles, flats, pcc & brick pillars below cable trenches for construction of out door cable trenches ( odct ) of required depth / type with pre cast rcc covers including associated works like cable trench culverts crossings for roads and sumpit cum pump chamber with 2hp motor of reputed make, starter, volt meter, amp meter etc. as per approved trench layout plan, hvpnl drgs. & tech. specs. complete in all respect. 209 9. site surfacing9.1 providing, supplying & laying 100mm thick in two layers of 50mm each of 20mm nominal size uncrushed / crushed / broken stone pebbles gravel fill including dressing, rolling & compacting complete in all respects as per specs. & instructions of xen / civil works division. 210 9.2 providing, supplying & laying 100mm thick pcc ( 1:4:8 ) using 20mm nominal coarse aggregates and supplying & spreading 100mm thick layer of 40mm nominal size uncrushed / crushed / broken stone pebbles over the pcc including construction of toe wall ( exposed wall plastered with cement mortar 1:5 ) to hold 40mm single size uncrushed / crushed / broken stone pebbles wherever required in the bays covered under the present scope as detailed in the gelo & instructions of concerned xen / civil works division. 211 10. boundary wall10.1 supply of labour, t&p, material & construction of front, side & u / c boundary walls ( brickwork below dpc level ) as per gelo / clo, tech. spec. & hvpnl drgs including excavation, pcc, back filling etc. complete in all respects. 212 10.2 supply of labour, material and construction of front, c & u / c boundary walls above dpc including main gate foundationsas per gelo / clo, technical specifications. & hvpnl drg. hcd / ts 1176 r3 including dpc complete in all respect.i. 6 ft. high u / c b / wall with barbed wire on angles at top including construction of entrance gate ( w / o wicket gate ) for yard. 213 ii. 4½ ft. high front wall including providing grill at top of wall & construction of main entrance gate ( with wicket gate ) . 214 11. control roomsupply of labour, material & construction of control room building complete in all respect as per tech. specs. & approved drgs. attached including exterior & interior acrylic emulsion paint, all internal services like water supply including supply & providing of 5000ltr. capacity triple layered sintex / diplast pvc tank, sewerage system, staircase, electrification including wiring, modular switches, maximum 20w 4ft. long led tubes with fittings minimum 1960 lumens, ceiling / exhaust fans , finishing, plinth protection, indoor trenches, trench covers, soakage pit near the switch house building, connection of sewerage system to soakage pit / sewerage system of local authorities ( as applicable ) , connection to main water supply system of local authority / submersible bore ( as applicable ) etc. & any other item not mentioned herein but required for completion of works. the successful bidder shall also provide water supply connection from bore well / huda / municipal / public health or panchyat water supply scheme ( as per available source of portable water ) to the control room bldgs. without any extra cost of hvpnl. 215 12. u / c fencing & gates providing & fixing chain link fencing including foundations, gi angle iron posts and gate ( s ) complete as per electrical layout & tech. spec. & as per drawing attached. 216 13. pcc pavementconstruction of pcc pavement in front, rear or side ( as per site requirement of the switch house building ) as per drawing no. hcd / sk 172 & technical specifications. 217 14. drainage cum rain harvesting system14.1 supply of labour, material for construction of recharge structures with bore well ( s ) as per hvpn drawings & specs. complete in all respect. the location of recharge structures shall preferably be located on corner ( s ) of the substation and shall be got decided from the concerned xen / civil works division on the basis of surroundings of the substation ( s ) . in case ground water table is less than 8m from fgl, rain harvesting well shall not be constructed ( the drainage system with sump pit is to be constructed as per item mentioned below ) . 218 the successful bidder shall evolve design & drawing for drains, manholes with rcc covers andsettlement tankincluding preparation of drainage layout drawing for disposal of rain water from building’s roof top & switch yard ( s / stn. ) area into respective bore well ( s ) in such a way that there shall be no ponding of water on the roof and switch yard ( s / stn. ) . the layout so developed shall be got approved from the employer. the location of sump pit cum pump chamber shall preferably be locatedon corner ( s ) of the s / stn. and shall be got decided from the concerned xen / civil works division on the basis of surroundings of the substation ( s ) . the successful bidder will also supply labour and material for construction of sump pit cum pump chamber as per hvpnl drgs. & provide two no. non clog pump ( s ) of 5hp of reputed make capacity with main switch, starter, volt meter, amp. mtr. etc. ( for each sump pit ) for disposal of excess water to outfall point. any other item ( s ) not mentioned herein but is / are required for completion of works shall be done by the successful bidder without any extra cost to the employer. 219 15. ac kiosk ( rcc framed structure ) design, engineering ( architectural and structural drawings of ac kiosk room ) , supply of labour, material and construction of ac kiosk room on rcc framed structure including anti termite treatment, plinth protection, electrification ( ceiling led tubes with fitting, modular switches, boxes, ac, electric wire etc. ) , acrylic emulsion and weather proof ( exterior acrylic paint ) , aluminum work ( doors / windows / ventilators frames etc ) , false ceiling, floor finishing, indoor rcc cable trenches, double brick wall with 50mm thick glass / mineral wool insulation complete in all respect as per technical specification. items, which are not mentioned but required for completion of work shall be provided by the successful bidder without any extra cost.i. 220 kv ac kiosk 220 ii. 66 kv ac kiosk 221 iii. 33 kv ac kiosk 222 16. rcc m 20 inclusive of labour, material, shuttering, steel reinforcement etc. complete in all respects to compensate excess quantity required to be executed due to difference in existing natural ground level and the formation level to be fixed after contouring or difference on account of revised drawing issued at the time of construction and the tender drawing. 223 17. barbed wire with rcc postsupply of labour and material for providing barbed wire with rcc post including gate etc. complete in all respect as per clo, technical specification and attached drawings. 224 18. rcc antifire wallconstruction of rcc anti fire wall of suitable height between t / f as per hvpnl drawing and all associated works including supply of labour, material, cement, reinforcement steel, steel form work etc. as per technical specification.i ) . anti firewall for 100 mva t / f plinth 225 ii ) anti firewall for 25 / 12.5 mva t / f plinth 226 19. dismantlementdismantling of existing u / c fencing, overhead tank, sump pit, old quarters & control room buildingat66 kv s / stn., complete in all respect. removal and disposal of malba / debris whatsoever received after dismantlement is in the scope of successful bidder and is to be disposed of as per satisfaction of engineer incharge. the material whatsoever shall be the property of the successful bidder. the dismantled material shall not be allowed for reuse at any of the sub stations....
31979331 bids are invited for enamel paint , anti corrosive paint , emulsion paint matt , distemper , red oxide ochre , chuna for white wash , putty, chuna powder total quantity : 49160...
31856024 repair and renovation i.e. painting, plaster with scraping, acrylic emulsion paint and raising of boundary wall at o / p phesd f.nagar, bs sheesh mahal, bs dhani chand nagar etc. at sh. satinder kumar mcc residence and all other works contingent there to...
31856023 repair and renovation i.e. painting, plaster with scraping, acrylic emulsion paint etc and raising of boundary wall at sh. narender kumar mcc residence and all other works contingent there to...
31714625 repair and renovation i.e. painting, plaster with scraping, acrylic emulsion paint and raising of boundary wall at o / p phesd f.nagar, bs sheesh mahal, bs dhani chand nagar etc. at sh. satinder kumar mcc residence and all other works contingent there...
31713791 repair and renovation i.e. painting, plaster with scraping, acrylic emulsion paint etc and raising of boundary wall at sh. narender kumar mcc residence and all other works contingent there to repair and renovation i.e. painting, plaster with scraping, acrylic emulsion paint etc and raising of boundary wall at sh. narender kumar mcc residence and all other works contingent there to...
31591806 bids are invited for plastic emulsion paint is:15489 (q3) , enamel, synthetic, exterior: (a) under coating (b) finishing paint is:2932 (q3) ,putty is:419 (q3) total quantity : 7300...
31347518 annual repair and maintenance to income tax residential qtrs at plot no gh 83a sector 20 panchkula during 2021 22 sh painting with acrylic emulsion paint and acrylic smooth exterior paint etc at type vi qtr no 1...
30779890 bids are invited for plastic emulsion paint is:15489 (q3) , putty is:419 (q3) , enamel, synthetic, exterior: (a) under coating (b) finishingpaint is:2932 (q3) total quantity : 7300...
30195453 bids are invited for white putty (20 kg ) as given in specification document , enamel yellow paint as given in specification document , enamel white paint as given in specification document , enamel black paint as given in specification document , plastic emulsion paint(royal antifungal) as given in specification document , duco thinner as given in specification document , duco paint (teak brown) as given in specification document , obd paint (20 kg ) as given in specification document , normal thinner as given in specification document , yelow oxide as given in specification document , turkey amber as given in specification document total quantity : 1...