labour Tenders in Haryana

1
Military Engineer Services - Haryana

40833761 smart periodicals services and external repairs of bldgs, staircase, roof treatment, parapet and chajja in age b / r i area under ge ( north ) ambala cantt; m&l for applying two coats of exterior apex ultima protek emulsion to all external walls, of approved shade / colour over a coat of damp sheet exterior primer including preparation of new plastered or old decorated surface by complete removal of existing treatment by scrapping and cleaning with mechanical sander ( having mechanical vaccum mechanism ) having rpm not less than 1500, sanding pad of 80 grit having dia of 7 / 9 to make free from dust, loose paint etc by skilled labour over and including water proof wall putty to give smooth and even surface complete all as specified and directed .notes :–the work for periodical services shall include the following and the rates quoted by the bidders shall include the same :– ( a ) the work pertaining to periodical services shall be executed by the contractor as per mou from authorised applicator through manufacturer ofthe materials like exterior emulsion paint, putty etc after approval by the ge. ( b ) the contractor shall upload with the documents under cover i memoradum of understanding ( mou ) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. ( c ) use of scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. ( d ) removing of nails, making good holes, cracks etc ( e ) work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. ( f ) spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. ( g ) washing floors, cleaning glass, joinery, electric fittings, wirings etc. drops and splashes of paint to be cleaned to the entire satisfaction of engineer–in–charge. ( h ) sample patch of 10sqm be prepared considering all the items of periodical and shall be got approved from ge prior to carrying out further work. 2 m&l for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 3 m&l for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 4 taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side md and including necessary scaffoldings complete all as specified and directed 5 m&l for ready mix plaster on brick work or concrete surfaces finished even and smooth including necessary scaffolding complete all as specified and directed.. 6 m&l for preparation of old wooden surfaces of any description width or girthincluding cleaning and applying two coats offrench polishing with and including a coat of wooden fillercomplete all as specified and directed. 7 s&f in replacement glazed cermaic tiles white of size 150x75x5 / 6mm fixed with neat cement slurry including writing required alphabet / number printed black on tiles for the purpose of marking bldg no / qtr no including hacking for key complete all as specified and directed. 8 demolition of cement concrete ( reinforced ) and ( reinforcement cut as required to facilitate demolition ) asin roofs, floors ( other than ground floors ) beams, slabs, staircases, landing, chajjas and similar suspended workand removal of debries to distance exc 250 mtr complete all as specified and directed. 9 m&l for rcc 1:2:4 ( nominal mix ) type b–0 ( using 12.5mm graded crushed stone aggregate ) in slabs supported on walls, beams and columns in floors, roofs, landings, chajja, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. note: reinforcement shall be measured and paid separately. 10 material and labour for mild steel tmt bars fe 500 / 550 d, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 11 use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick ( horizontal or sloping ) ( rough finished flat surfaces of concrete ) , complete all as specified and directed. 12 s&f for hand rails, half round or other steel section or core for wooden hand–rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc., and similar work conforming to fe–290 gde e–165 complete all a specified and as directed. 13 m&l for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surfaces of any description, not otherwise described, over 10cm width or girth complete all a specified and as directed. 14 dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks / tiles and removal of unusable bricks / tiles and removal from site, complete all as specified and directed. 15 demolition of mud in roof any thickness ( whether full thickness removed or part thereof ) including plastering & leaping plaster and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush / mechanical brush and with water throughly to romove all dust / dirt and loose particles to expose bare concrete roof slab and romoval of rubbish / demolished material out side md land complete all as specified note : demolition should be done by chiselling. 16 m&l for pcc 1:2:4 type b–1 using 20 mm mechanically crushed stone aggregate inroof as padding, paving, parapets and railings upto 60 cm in height and other like works complete all as specified. 17 m&l for providing and laying 3mm thick app ( atactic polypropylenepolymer ) modified prefabricated five layer weight not less then 3.60 kg / sqm water proofing membrane black finish reinforced with non woven polyster matt, make as approved consisting of a coat bitumious primer @ 0.40 ltr / sqm by the same membrane manufactures of density 0.87 to 0.89 kg / ltr at 25c temprature and viscosity 70–160 cps over the primer coat, the layer membrane shell be laid using butane troch and sealing all joints etc after preparing the surface complete as per standred practice as per manufactures instructions complete all as specified and directed. note: the vital physical and chemical parameters of the membrane shell be under :– ( i ) joint strength in longitudinal and transverse direction at 23c at 650 / 450 n / 5 cms ( ii ) tear strength in longitudinal and transverse direction at 300 / 250n / 5 cms. softing point of membrane not less then 150c when tested in accordance with astm ( d–5147 ) ( iii ) the laying of membrane shell be got down through the authorised applicator of manufactures of membrane only. 18 s&f for machine pressed cement concrete tiles 30cm x 30cm x 20mm thick, set jointed and pointed in neat cement slurry in roofs, laid over and including 15 mm thick screed bed in cm ( 1:6 ) and jointed flush in cm ( 1:3 ) mixed with 5% crude oil by weight of cement complete all as specified. 19 m&l for preparation of any description wood, steel, iron, concrete, brick, stone or any other surface of wall / roof applying of two coats of heat resistant paint complete all as specified and directed. 20 supply only polymer based liquid water proofing compound complete all as specified and directed. 21 m&l 18 to 20 mm thick green marble slab in single piece in jambs and in double piece in cills on vertical surfaces with neat cement slurry and over and including 15mm thick rendering in cement mortar 1:3 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing and necessary edge moulding before fixing of stone complete all as specified and directed. 22 taking down chowkats or frames with shutter, areanot exceeding 1.50 square metre ( w / o taking off shutters from frames ) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin cm ( 1:3 ) and finishing the surfaces to match with existing finish complete all as specified and directed. 23 taking down chowkats or frames with shutter, area exceeding 1.50 square metre andnot exceeding 4.00 square metre ( without taking off shutters from frame ) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in cm ( 1:3 ) and finishing the surfaces to match with existing finish complete all as specified and directed. 24 s&f extruded powder coated aluminium section as in window, ventilation, door ( powder coated 50 micron in blackcolour ) with movable / sliding, openable or fixed type shutter or any pattern as directed, aluminum section medium weight of series b or size as directed by the engr in charge cut to size, jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed.note :– ( i ) only aluminum sections measured and paid in this item and thickness of any member should not be more than 2mm. ( ii ) rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller, handle, locks etc. 25 s&f for anodised aluminium grill ( anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15 ) of approved design / pattern, with approved standard section and fixed to the existing window frame with c.p. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineerin charge 26 s&f sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading / packing with rubber gasket complete as specified and directed. 27 s&f 100mm length aluminium anodised barrel tower bolt of extruded section complete all as specirfied and directed. 28 s&f stainless steel butt hinges 100mm size complete all as specirfied and directed. 29 s&f 100mm length extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 30 supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed. 31 s&f 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed. 32 s&f aluminium alloy, anodised, sliding door of length 300mm, with hasp and staple ( bolt type ) , bolt not less than 12mm diaand fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. 33 demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 34 m&l brick work with sub class b old size bricks, built in cm 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. 35 supply and fixing for paver tiles ( coloured ) , good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by engineer–in–charge, set, jointed and pointed in neat cement slurry @ 3.00 kg / square metre, laid over and including 20 mm thick screed bed ( average thickness ) cement mortor ( 1:6 ) bed including dismantling floor, hearth or wall tiling any description and thickness including removing rubbish off the premises complete all as specified and directed. ( note: design / pattern shall be as approved by ge before execution of work ) 36 supply and fixing in repair of gi tubing, isi marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 37 refixing old steel tubing 20mm bore and connections in new or old position ( walls, ceiling, floors, etc. ) with and including s&f of new fittings including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 38 supply and fixing in repair of gi tubing, isi marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 39 refixing old steel tubing 15mm bore and connections in new or old position ( walls, ceiling, floors, etc. ) with and including s&f of new fittings including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 40 s&f in repair for 1000 litres rotational moulded polyethylene hdpe triple layered water storage tanks of white colour ( cylindrical vertical with closed top ) hoisted and fixed in position, connecting up pipes, securing access covers etc., with and including 20mm ball brass float valve with float and flynut screwed to pipe and dismantling of water tanks and removing to store complete all as specified and as directed. 41 disconnecting existing tanks, setting aside ( or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re fixing in position and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed. 42 s&f in repair for 20mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 43 supply and fixing in replacement of 110mm dia upvc soil, waste, drain pipe, type ‘b’, conforming to is 13592 1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls complete all as specified and as directed. note rubber rings for pipes and fittings shall conform to is 5382 1985. 44 s&f in replacement110mm bore pvc ( swr ) bends any radius complete all as specified and directed. 45 demolition of unreinforced cement concrete of any description and in any position such as in roofs, floors ( other than ground floors ) , beams, staircases, landing, chajjas and similar suspended work removal of debries to distance exc 250mtr complete all as specified and directed. 46 providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m–35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. 47 m&l factory made kerb stone of m–25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm ) , including making drainage opening wherever required complete all as specified and directed. 48 notes for all items :– the tenderer must keep in mind when quoting rates against items out in multiple storey house having height 4 mtr to 10 mtr. necessary scaffolding and saftey measures required during execution of work are including in this items. 49 note: amount of credit ofrs. 87, 530.00 for retrieved materials is mentioned in schedule of credit page no. 19 of tender documents in pdf form which will be deducted offline while acceptance of tender....

Due Date : December 18, 2023

Tender Value : ₹ Ref. Documents

View Tender
2
Public Health Engineering Department - Haryana

40822910 tender for tosham block: tosham panchayat: tosham dist.: bhiwani annual mtc. work for water supply. motor spare parts & repairs/ labour for motor fitting motor spare parts & repairs/ bearing motor spare parts & repairs/ rewinding of motor ci valves/ c i d/f non return valve motor spare parts & repairs/ motor fan...

Due Date : December 01, 2023

Tender Value : ₹ 15400.0

View Tender
3
Public Health Engineering Department - Haryana

40822887 tender for baganwala block: tosham panchayat: baganwala dist.: bhiwani annual maintenance work for water supply. s.no. category description / item size / location unit quantity 1 electrical items/ sub mersible motor cable providing and fixing of 6 mm sq submersible cable 3 core complete in all respect. /6 sqmm / 5hp sub motor rewinding mtrs. 14 2 motor spare parts & repairs/ labour for submersible motor lowering unlowering labour for submersible pump & motor lowering and lifting. /labour for submerseable lowering and unlowering / 5hp sub motor rewinding nos. 1 3 motor spare parts & repairs/ housing bush providing and fixing of housing bush for 7.5 hp submersible motor /7.5 hp / 5hp sub motor rewinding nos. 4 4 motor spare parts & repairs/ rewinding of motor rewinding of submersible motor with including the cost of copper wire complete including credit of old material. /5hp submersible motor / 5hp sub motor rewinding nos. 1...

Due Date : December 01, 2023

Tender Value : ₹ 9142.0

View Tender
4
Public Health Engineering Department - Haryana

40822884 tender for chappar rangran block: tosham panchayat: chappar rangran dist.: bhiwani annual mtc. work for water supply motor spare parts & repairs/ carriage of burnt motor to workshop & back motor spare parts & repairs/ labour for rottor grinding and balancing motor spare parts & repairs/ labour for motor fitting motor spare parts & repairs/ rewinding of motor...

Due Date : December 01, 2023

Tender Value : ₹ 14450.0

View Tender
5
Public Health Engineering Department - Haryana

40822853 tender for dadam block: tosham panchayat: dadam dist.: bhiwani annual maintenance work for water supply. s.no. category description / item size / location unit quantity 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back carriage of 20 hp horizontal motor from site to workshop and back to site again /for 20 h.p. horizental motor / 20hp clear water motor repair nos. 1 2 motor spare parts & repairs/ labour for rottor grinding and balancing labour for rottor grinding and balancing. /all / 20hp clear water motor repair nos. 1 3 motor spare parts & repairs/ labour for motor fitting motor overhauling and fitting charges /over hauling charges / 20hp clear water motor repair nos. 1 4 motor spare parts & repairs/ bearing providing and fixing of bearing 6309 make skf for motor of various split casing horizontal pumpset complete in all resepct. /6309 / 20hp clear water motor repair nos. 2 5 motor spare parts & repairs/ insulation kit glaind, grease etc. in motor / glain grease etc nos. 1 6 motor spare parts & repairs/ insulation kit varnish kit / motor varnish kit nos. 1...

Due Date : December 01, 2023

Tender Value : ₹ 8900.0

View Tender
6
Public Health Engineering Department - Haryana

40822847 tender for pinjokhara35) block: tosham panchayat: pinjokhera dist.: bhiwani annual mtc. work for water supply motor spare parts & repairs/ carriage of burnt motor to workshop & back motor spare parts & repairs/ labour for rottor grinding and balancing motor spare parts & repairs/ labour for motor fitting motor spare parts & repairs/ bearing motor spare parts & repairs/ rewinding of motor machinery items/ tyre coupling...

Due Date : December 01, 2023

Tender Value : ₹ 16700.0

View Tender
7
Military Engineer Services - Haryana

40820371 tender for special repair to bldg no p 529 & p 773 at chandimandir mil station.; 1 demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 2 brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed. 3 powder coated aluminium ( minimum thickness of powder coating 50 micron ) work for doors, windows, ventilators and partitions ( fixed portions ) with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete all as specified and directed. 4 powder coated aluminium ( minimum thickness of powder coating 50 micron ) for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, locking rollers etc all complete as per architectural drawings and the directions of engineer in charge. 5 3mm thick aluminium composite panel sheet ( acp ) fixed with aluminium anodised beading and rubber packing with all the clips and fittings colour as approved by engr in charge complete all as specified and directed. 6 5.00mm thick ordinary quality tinted glass, fixed to aluminum frame workin panels exc 0.5 sqm in each pane, complete all as specified & directed. 7 12mm thick toughned glass fixed in aluminium frame / shutter, windows frames with aluminium anodised beading and rubber packing in panels exc 0.5 sqm in each pane complete all as specified and directed. 8 4mm thick false ceiling fibre cement board, white in colour , 595mm x 595mm in size, fire and moisture resistance, fixed with and including standard gi snap grid framing ( powder coated ) and suspended not exceeding 900mm below from ceiling with 3mm dia wire including clips and misc fittings etc in pattern as approved by ge, fixed as in repair ( size of panel shall be of 605 x 605mm and gi snap grid framing shall be of 1mm thick standard section i.e. channels, angles, tee etc ) complete all as specified and directed. 9 linear ceiling system comprises of 84mm x 16mm panel without flush profile ( for 100mm module oniy ) roll formed out of metal coils of powder coated galvanised steel. panels are fixed on to roll formed carriers 32mm wide x39mm deep made out of 0.90mm powder coated aluminium or 0.50mm galvanised powder coated steel sheet with cutouts to hold the panels in module of 100mm at maximum 1.50mm without insulation. carriers are suspended from the roof or truss by 4mm dia galvanised steel wire rod hangers with special height adjustment suspended clips at max 1.20 metre centre to centre. hangers are fixed to the roof by ceiling brackets. no joint is permissible for length less than 4.0m. edge profiles or wall angles are 24mm x 24mm x 0.40mm thick and match the colour of the panel complete all as specified and directed. 10 toughened glass, 12 mm thick tempered, for decorative / crest, plain / frosted, cut to size, polished edge, homogenious colour fixed as in glass door shutter or glass partition including necessary holes, cutouts & shunk holes and necessary fittings, fixtures, brackets and accessories required like stainless steel hinges, floor door closer, latches, handle or knobs, stop plate etc including ruber beading and silicon clear for joints, complete all as specified and directed by engineer in charge.note : decoration / design or unit name, emblem, crest over glass shutter will be approved by engr in charge before execution and the rates are inclusive of the same. 11 door closer hydraulically regulated of aluminium extruded section, designation no. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg, complete all as specified and directed. 12 double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and directed. 13 200mm stainles steel handle fancy type fixed to toughened glass complete all as specified and directed. 14 taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. 15 15mm thick rendering in cement and sand mortar 1:6 over concrete / brick surfacesfinished even and smooth without using extra cement, complete all as specified & directed. 16 15mm thick rendering in cement and sand mortar 1:4 over brick or concrete surfaces finished even and smooth with using extra cementcomplete all as specified. 17 pvc false ceiling 8 10mm thick, coloures, prelaminated on one side of decortative choice or approved design and balancing white on other side ( seamless type ) suitably placed in false ceiling grid made of aluminium / g.i. / m.s. as per specification and drawing, complete all as specified & directed 18 demolition of mud in roofs, any thickness, including plastering and leeping ( whether full thickness removed or only a part thereof ) , complete all as specified and as directed. 19 pcc 1:2:4 type b 0 ( 12.5 mm graded stone aggs ) as in roof padding, roof kerbs ( 50mm thick average thickness ) rounded or chamfered on edgescomplete all as specified and directed. 20 3mm thick atactic polypropylene polymer ( app ) based polymeric membrane minimum weighing 3.6kg / sqm andreinforced with polyester non woven fabric ( weight not less than 150 gm / sqm ) laid over a coat of bitumen primer @0.40l / sqm by same membrane manufacturer of density 0.87 to 0.89 kg / l at 25° c temperature and viscosity 70 to 160 cps, over primer coat bonding material of blown bitumen 85 / 25 grade heated to working temperature of 180° c applied @1.2kg / sqm. the membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions complete all as specified & directed. 21 rendering 15mm thick ( average thickness ) plaster in cement mortar 1:4 on concrete roof / wallsurfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by engineer in charge. 22 dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed. 23 40mm thick brick tiles over and including 15mm thick cement mortar 1:4 joints, grouted & pointed flush as the work proceedsmixed with crude oil 5% by wt of cement complete all as specified and directed. 24 all as per item no 23 here in before but except tiles. 25 2mm thick wall care putty over wall surfaces including two coats of 100% premium acrylic plastic emulsion paint over a coat ofpriming paint including preparation of new wall surfacescomplete all as specified and directed. 26 complete removal of existing treatment and preparation of old plastered or unplastered surfaces of walls including 2mm thick wall care putty and applyingtwo coats of 100% premium acrylic plastic emulsion paint over a coat of primer complete all as specified and directed. 27 two coats of 100% premium acrylic exterior emulsion paint over a coat ofpriming paint including preparation of new wall surfacescomplete all as specified and directed. 28 preparation of old plastered or unplastered surfaces of walls and applying one coat of exterior weather proof acrylic emulsion paint on external walls complete all as specified and directed. 29 demolition of un reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. ( below or above ground level ) complete all as specified and directed. 30 25mm thick plain cement concrete 1:2:4 type b 0 using 12.5mm graded aggregate as in sub base complete all as specified & directed. 31 double charged coloured vitrified ceramic tiles 10mm thick ( square / rectangular ) polished, dark shade, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6complete all as specified and directed 32 coloured vitrified ceramic tiles, light shade, 8 10mm thick ( square ) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 33 coloured non skid porcelain tiles exterior grade 400x400x9 10mm thick heavy duty ( endura from johnson or equivalent ) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, complete all as specified and directed 34 plain cement concrete 1:4:8 type d 2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed. 35 75mm thick pcc 1:3:6type c 1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85 / 25 and 3 parts of sand by weightall as specified & directed by engineer in charge. 36 precast cement concrete louvres and jallies, 40mm thick ( measured solid ) type b0 ( 12.5mm aggregate ) set in cement mortar ( 1:4 ) , including all mouldings but excluding frame, fixed in repairs , complete all as specified & directed. 37 providing reinforced cement concrete type b l, 1:2:4 ( 20 mm graded aggregate ) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sqcm, but n.exc 250 sqcmwith or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified & directed. 38 reinforced cement concrete 1:1½:3 ( nominal mix, type a 1, using 20mm graded crushed stone aggregate ) as in beams, cantilevers , bressumers, lintels over 1.5m span, all as specified and directed . 39 reinforced cement concrete , 1:1½:3 ( nominal mix, type a 1, using 20mm graded crushed stone aggregate ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete , all as specified and directed. 40 reinforced cement concrete , 1:1½:3 ( nominal mix, type a 1, using 20mm graded crushed stone aggregate ) as in columns, pillars, piers, posts and strutsand the like complete all as specified and directed ( reinforcement shall be measured and paid for separately ) . 41 formwork to sides of pillars, posts, struts, piers, columns and stanchionsrough finished surface of flat concrete complete all as specified and directed. 42 mild steel high strength deformed tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia. or securing with clips complete all as specified and directed. 43 all as per serial item no 42 herein before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, ditto 44 rolled mild steel work as in roof trusses ( framed ) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing ( beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc , gde fe 410 s, including a priming coat of red oxide zinc chrome primer, complete all as specified & directed. 45 framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to fe.290.gde e 165 ( brackets over 10 kg each to be measured under structural steel ) complete all as specified and directed. 46 excavation in post holes ( or similar hole ) each in hard and dense soil, n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. 47 pre painted galvalume aluminium zinc coating gi based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 mpa as in roof coverings / cladding to wall, fixed with self tapping screws etc, complete all as specified & directed by engineer in charge. 48 preparation of new or previously untreatedsteel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint ( ordinary tint ) over a coat of red oxide, zinc chrome complete all as specified and directed. 49 taking down chowkats or frame n. exc. 1.5 sqm each with shutters ( without taking off shutters from the frame ) complete all as specified and directed. 50 500 litres capacity rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm ptmt, complete all as specified and directed . 51 1000 litres capacity rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm ptmt, complete all as specified and directed . 52 granite slab 16 18mm thick ( of any type & shade as approved ) , as in steps, jambs, pillars , window cill, cooking platfrom, counter slabetc ( length and width as ordered by ge in one piece ) best quality machine cut and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of slab laid over and including15mm thick screed bed in cement mortar 1:4 including nosing at edges, rounded edges complete all as specified and directed. 53 glazed ceramic tiles in vertical surface350x250x7mm / 450x350x7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed. 54 glazed ceramic texture / designer type, exterior wall tiles in vertical surface 300mm x 450mm x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed. 55 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by engineer in charge. 56 3mm thick aluminium composite panel sheet ( acp ) including ms frame work for support as in wall cladding, covering of fasade and like colour of acp sheet as approved by engr in charge complete all as specified and directed. 57 returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified. 58 removal excavated soil to a distance not exceeding 50 m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point complete all as specified & directed. 59 taking down carefully aluminum / copper point wiring on & including hard wood battens, surface conduit and board / blocks etc or through conduits for light , socketor power point , fan point complete incl fitting such as switches , sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials ( other than those for which credit has been given by the contractor ) to the mes stores yard for keeping in safe custody complete all as specified and directed. 60 material and labour forpoint wiring with approved colour code multi stranded copper conductor, pvc insulated and unsheathed frlsh cable of size 1.5 sqmm , 1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, pvc insulated and unsheathed frlsh cable of size 1.5 sqmm , 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed pvc conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofone light / bell / buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. 61 all as per serial item 60 herein before but for socket outlet 3 pin 5 amps on same board complete all as specified and directed 62 all as per serial item 60 herein before but for socket outlet 3 pin 6 amps on independentboard complete all as specified and directed 63 all as per serial item 60 herein before but one socket outlet three pin , 6 / 16 amp, independent board, with 2.5 sqmm ( nominal area ) frlshcable & 2.5 sqmm ( nominal area ) cable as earth continuity conductor 64 switch modular type ( isi marked ) , single pole, one way 6 amps, one module ( isi marked ) , complete all as specified & directed. 65 switch modular type ( isi marked ) , single pole, one way 16 amps, one module ( isi marked ) , complete all as specified & directed. 66 socket shutters outlet 2 / 3 pin 6 amp modular type multi purpose combined two module ( isi marked ) , complete all as specified & directed. 67 socket shutters outlet 2 in 1 pin 6 / 16 amp modular type multi purpose combined 2 module ( isi marked ) , complete all as specified & directed. 68 ceiling rose, pvc or polycarbonate of size 65mmx50mm three terminals ( isi marked ) all as specifiedand directed by engineer in charge. 69 modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed. 70 lamp holder, pvc / polycarbonate type with back plate angular type fixed on wall suitable for batten fitting , complete all as specified and directed. 71 led lamp9 watts, b 22 type complete all as specified . 72 disconnecting the power supplyand taking down carefully by unscrewing from boards fittings and fixtures such as dbs, junction box, panels of any size complete with all mccbs , mcbs etcand removing from site, complete all as specified and directed . 73 vertical tpn distribution board double door flush mounting with provisions for mccbs incomer upto 125 to 160amps & outgoing 4 way having ip 43 protection complete all as specified and directed . 74 mccb, 125 amps, four pole, 3 phase , 16ka, 415 volt with adjustable thermal andmaganetic release, with proper thimble complete all as specified and directed 75 mcb db, ip 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way spn with 200 amps busbar 240v completed all as specified and directed. 76 single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb 20 amp complete all as specified and directed. 77 mcb, spn , 240 volt, 40 to 63amps, 10 ka , c series including connection with suitable size aluminium / copper lugs complete all as specified and directed 78 mcb , sp , 240 volt, 6amps to 32amps, 10 ka , c series including connection with suitable size aluminium / copper lugs complete all as specified and directed 79 led light fitting 1x9w / 1x10wbulkhead luminaires including led light driver holder connecting up with three core flexible copper conductor cable of suitable sizefixed as in repair complete all as specified and directed. 80 slim led lights fitting, 4 feet, 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed. 81 slim led lights fitting, 2 feet, 1x 10w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed. 82 taking down carefully old copper or aluminium sub main wiring of any nos of wiring and size with earth wire on wooden batten / surface conduit / casing capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed. 83 sub main wiring with two singlecore frlsh pvc insulated and unsheathed cable with copper conductor of size 4 sqmm ( nominal area ) , 1100 volt grade ( with approved colour coding as per is ) with and including continuous earth wire of size 4 sqmm pvc insulated and unsheathed frlsh multi stranded copper conductor 1100 volts grade , and connected to main board drawing throughpvc concealed conduit 25mm size ( minimum size ) , cutting chases in walls for pvc concealed conduit and making good the disturbed surfaces by provding by wall putty / pop after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed.note : ( i ) for the purpose of measurement, 3 runs ( phase, neutral and earth ) of single core04 sqmm cable shall be considered as 1 running metre. ( ii ) cutting chases and pvc conduit will be measured and paid separtely ( iii ) colour code shall be red for phase, black for neutral and green for earth 84 led secuirty light 30 watt led with lens and water / weather proof powder coated high pressure dia cast housing with ip 66 built in control driver, aluminium reflector, heat resistant toughened clear glass, connector block, surge protection with 20 watt led lamp fixed on ceiling / pole / wall / with fixing arrangement fixed with nuts bolts and 1.5 sqmm 3 core flexible wire from ceiling rose to light fitting , completeall as specified and directed . 85 supplying, installing and commissioning of split type air conditionerwith coolingfunction eer 3.2 of capacity 1.5tr, 03 star rated with cordless remote control unit and in built air ioniser, plasma filter for better indoor air quality, 03 star rated suitable for wall mounted, single phase, 230 / 250 volt ac including breaking necessary hole in wall for fixing indoor and outdoor unit and making good to disturbed surfaces with cement mortar to match with existing finishes after commissioning, pvc pipe medium duty 25 mm dia for draining out condensed water, all as required including necessary electric connections, complete all as specified and directed.note : ( i ) quoted rates shall deem to includ the cost ofdrain pipe, copper tubing of requisite length and 4 sqmm multi standard copper cable, brackets, etc. ( ii ) installation and commissioning to be done through oem / itsauthorised service centre / agency. 86 supply and installed voltage stabilizer automatic digital display type, single phase naturally air cooled indoor type & designed for input variation between 170v to 250 volt with output voltage stabilized at 230 volt + / 2.5% of capacity 4.0 kva complete all as specified and directed. 87 supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50 hz, rpm 1200, copper winding of sweep 300mm, complete all as specified and directed. 88 20 to 25 mm dia, rigid non metallic pvc concealed conduit, isi marked, inclusive of all fittings ( such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends ) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, fixed as in repair complete all as specified and directed . 89 cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar ( 1:3 ) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified and directed . 90 earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of gi wire 4mm dia ( 8 swg ) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore gi light grade ( isi marked ) with funnel and wire mesh, including all necessary excavation and earth work, pcc chamber in plain cement concrete ( 1:3:6 ) type c 1 and pit cover of presast rcc with ms frame etc and all as shown in electrical plate no 3 of mes sch part i ( 2009 ) , complete including dismantling of old earthing, all as specified and directed. note ( s ) : ( i ) rcc pit cover shall be pre cast of rcc ( 1:2:4 ) type b 1, 80mm thick reinforced with xpm not less than 4kg / sqm. ( ii ) pcc chamber shall be constructed 500 mm away from the edge of earth pit. ( iii ) rate shall include earth lead and protection pipe of length 7.5m ( iv ) earth resistance should be less than 3ohm. in case the test results are not found below 3ohm, complete earthing will be redone without any extra cost to govt. ( v ) unit rate including protection pipe and gi wire 4.00mm dia from top to earth plate upto 7.5 meter...

Due Date : December 16, 2023

Tender Value : ₹ 24.20 Lakhs

View Tender
8
Indian Army - Haryana

40808794 bids are invited for repair of vechile engine guard , engine oil , head light , head light cover , horn , ignition switch , indicator , kick lever , kick starter kit , leg guard , combination switch , meter assembly , number plate , oil filter , suspension shocker front , crank bearing kit , cushion asssembly rear , cylinder kit , chain sprocket set , cable speedometer , cam chain , pillion foot rest holder , piston assembly , piston ring set , saree guard , shock absorber set , labour total quantity : 28...

Due Date : December 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
9
Public Health Engineering Department - Haryana

40808444 tender for kasni kalan block: behal panchayat: kashni kalan dist.: bhiwani annual mtc. work for water supply labour for 15 hp submersible motor lowering and unlowering complete in all respect. /15 hp / kasani kalan motor opening and fitting labour all. / kasni kalan prov.& fixing copper thimble 50 mm /50 mm kasni kalan...

Due Date : November 28, 2023

Tender Value : ₹ 5120.0

View Tender
10
Public Health Engineering Department - Haryana

40808390 tender for annual maintenance works for water supply outsourcing of works/ rectification of leakages in inlet channel job work for repair of rcc inlet chanel 400 mm dia inclduing labour material etc. /repair of 400mm rcc joint / replacement of rcc pipe of size 16 i/d meant for water works of village mokhra kheri including rcc pipe, filling of joint and other material required as per site condition...

Due Date : November 29, 2023

Tender Value : ₹ 19800.0

View Tender
11
Public Health Engineering Department - Haryana

40808373 tender for bhaini bhaorn block: maham panchayat: bhaini bhaorn dist.: rohtak annual mtc. work for water supply carriage of burnt motor monoblock of all sizes to workshop & back including loading and unloading. /all size motor / in village bhaini bharon motor opening and fitting labour /all. / in village bhaini bharon rewinding of clear water motor with including the cost of copper wire including credit of old material / 20hp /20 hp clear water motor / in village bhaini bharon...

Due Date : November 29, 2023

Tender Value : ₹ 18500.0

View Tender
12
Public Health Engineering Department - Haryana

40808367 tender for annual maintenance works for water supply 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back 2 motor spare parts & repairs/ labour for motor fitting 3 ci specials/ c i d/f tail piece 4 ci valves/ c i d/f sluice valves 5 motor spare parts & repairs/ rewinding of motor...

Due Date : November 29, 2023

Tender Value : ₹ 19700.0

View Tender
13
Public Health Engineering Department - Haryana

40808329 tender for ajaib block: maham panchayat: ajaib dist.: rohtak annual maintenance work for water supply. s.no. category description / item size / location unit quantity 1 motor spare parts & repairs/ rewinding of motor rewinding of 7.5 hp submersible motor including cost of cooper wire, brass bush, thrush plate, lifting of motor and pump with the help of chain pully, & manual labour & refitting after complete repair, loading unloading & carriage charges, testing of motor after complete & less cost of old defective material complete job (job) /7.5 hp submersible motor job (job) / ob work for rewinding of 7.5 hp submersible pump with new copper wire and less of old brunt scrap including carriage, lowering and bush change and thrust plate with labour and gst at water works complete job ion all respect. nos. 1...

Due Date : November 28, 2023

Tender Value : ₹ 19500.0

View Tender
14
Public Health Engineering Department - Haryana

40808320 tender for annual maintenance works for water supply outsourcing of works/ rectification of leakages in inlet channel repair of 350mm rcc inlet channel joints including cement, sand, brick and manual labour complete in all respect...

Due Date : November 28, 2023

Tender Value : ₹ 19200.0

View Tender
15
Public Health Engineering Department - Haryana

40808303 tender for mokhra kheri rojh block: maham panchayat: mokhra roj dist.: rohtak annual mtc. work for water supply 35 sqm mm make havels/polycab / job work for supply and fixing of 35 sq mm copper wire make havells with copper thimble with labour and gst at water works complete job ion all respec...

Due Date : November 28, 2023

Tender Value : ₹ 18900.0

View Tender
16
Public Health Engineering Department - Haryana

40808288 tender for mokhra kheri rojh block: maham panchayat: mokhra roj dist.: rohtak annual maintenance. work for water supply 1 electrical items/ copper wire 35 mm 4 core copper cable / job work for supply and fixing of 35 sq mm copper wire make havells with copper thimble with labour and gst at water works complete job ion all respect....

Due Date : November 28, 2023

Tender Value : ₹ 16200.0

View Tender
17
Public Health Engineering Department - Haryana

40808280 tender for madina kaursan block: maham panchayat: madina korsan dist.: rohtak annual maintenance work for water supply. s.no. category description / item size / location unit quantity 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back carriage of burnt motor monoblock of all sizes to workshop & back including loading and unloading. /all size motor / in madina korsan nos. 2 2 outsourcing of works/ outsourcing jobwork persons job work for miscellaneous works /job work for miscellaneous work / long 12 feet hoddi gi pipe key w/w in madina korsan nos. 5 3 motor spare parts & repairs/ labour for motor fitting motor opening and fitting labour /all. / in madina korsan nos. 2 4 motor spare parts & repairs/ bearing providing and fixing bearing 6208 for various electrical motor make skf/nbc etc /6208 / in madina korsan nos. 2 5 motor spare parts & repairs/ rewinding of motor rewinding of 5 hp motor /5 hp rewinding of motor / in madina korsan nos. 1...

Due Date : November 28, 2023

Tender Value : ₹ 19900.0

View Tender
18
Public Health Engineering Department - Haryana

40808279 tender for behlba `providing functional household tap connection (fhtc) in village behlba. (jjm coverage [4215 01 102 98 99 16]) hiring of hydra /hydra machine / in village behlba old water works for lowering and unlowering of 10 suction pipe providing and fixing of sluice valve marked with 1.6 p.n. 150mm including the cost of nut bolts , rubber complete in all respect sheet.( arko, venus, leader, bir ,panja, upadhay. ) /150mm / in village behlba old water works prov. and fixing 250 mm non return valve with labour complete job / in village behlba 1st water works for clear water suction...

Due Date : November 28, 2023

Tender Value : ₹ 48100.0

View Tender
19
Public Health Engineering Department - Haryana

40808274 tender for mokhra khas block: maham panchayat: mokhra khas dist.: rohtak annual maintenance. work for water supply. motor spare parts & repairs/ carriage of burnt motor to workshop & back carriage of burnt motor monoblock of all sizes to workshop & back including loading and unloading. /all size motor / b/s mokhra syam nos. 2 2 motor spare parts & repairs/ labour for motor fitting motor opening and fitting labour /all. / b/s mokhra syam nos. 2 3 motor spare parts & repairs/ rewinding of motor rewinding of 30 hp clear water motor with including the cost of copper wire including credit of old materials /30 hp clear water motor rewinding / b/s mokhra syam...

Due Date : November 28, 2023

Tender Value : ₹ 19800.0

View Tender
20
Public Health Engineering Department - Haryana

40808268 tender for annual maintenance works for water supply sewer related items/ bucket type machine related items hiring of jetting machine with fuel driver and labour / in village bhaini mato and behlba...

Due Date : November 28, 2023

Tender Value : ₹ 14000.0

View Tender
21
Public Health Engineering Department - Haryana

40808261 tender for mokhra khas block: maham panchayat: mokhra khas dist.: rohtak annual mtc. work for water supply carriage of burnt motor monoblock of all sizes to workshop & back including loading and unloading. /all size motor / b/s mokhra khas motor opening and fitting labour /all. / b/s mokhra khas rewinding of 30 hp clear water motor with including the cost of copper wire including credit of old materials /30 hp clear water motor rewinding / b/s mokhra khas...

Due Date : November 28, 2023

Tender Value : ₹ 19800.0

View Tender
22
Public Health Engineering Department - Haryana

40808252 tender for madina kaursan block: maham panchayat: madina korsan dist.: rohtak annual mtc. work for water supply. 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back 2 motor spare parts & repairs/ labour for motor fitting 3 motor spare parts & repairs/ rewinding of motor 4 motor spare parts & repairs/ bearing...

Due Date : November 28, 2023

Tender Value : ₹ 19500.0

View Tender
23
Public Health Engineering Department - Haryana

40808249 tender for sisar khas block: maham panchayat: sisar khas dist.: rohtak annual maintenance. work for water supply. 1 outsourcing of works/ outsourcing jobwork persons labour for various work /one job / the connections of the houses of village sisar khas were illegal, they were cut, plugged and some were repaired, including digging and stuff by labour....

Due Date : November 28, 2023

Tender Value : ₹ 19800.0

View Tender
24
Public Health Engineering Department - Haryana

40808246 tender for ajaib block: maham panchayat: ajaib dist.: rohtak annual maintenance work for water supply. s.no. category description / item size / location unit quantity 1 outsourcing of works/ outsourcing jobwork persons labour for various work /one job / repair of 4 sluice valve and refix 4 sluice valve ,cleaning of houdies, labour and material complete in all respect in village ajaib nos. 1...

Due Date : November 28, 2023

Tender Value : ₹ 14600.0

View Tender
25
Public Health Engineering Department - Haryana

40808241 tender for gorawar block: maham panchayat: girawar dist.: rohtak annual mtc. work for water supply motor spare parts & repairs/ carriage of burnt motor to workshop & back motor spare parts & repairs/ labour for motor fitting motor spare parts & repairs/ motor fan motor spare parts & repairs/ rewinding of motor...

Due Date : November 28, 2023

Tender Value : ₹ 20000.0

View Tender
26
Public Health Engineering Department - Haryana

40808232 tender for mokhra khas block: maham panchayat: mokhra khas dist.: rohtak annual mtc. work for water supply hire charges of jcb with fuel and driver for excavation and other job works /hiring of jcb per hour basis / behlba running of 15 hp diesel engine provided by department and agency only supply diesel and casual labour for watch and ward & running diesel engine for s/s tank filling / running of 15 hp. diesel engine provided by department and agency to supply diesel, casual labour including watch and ward. / behlba providing and fixing jipsy joint 250mm i/d class 10 complete in all respect. / 250mm / behlba...

Due Date : November 28, 2023

Tender Value : ₹ 20000.0

View Tender
27
Public Health Engineering Department - Haryana

40808231 tender for annual maintenance works for water supply 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back carriage of burnt motor monoblock of all sizes to workshop & back including loading and unloading. /all size motor / 2 no motor carriage in vill gaddi kheri and mokhra khas 2 motor spare parts & repairs/ rottor shaft repair labour charges for opening and refitting of motor shaft after balancing and turning with satisfaction of engineer in charge. /shaft balancing and turning / in vill gaddi kheri 3 motor spare parts & repairs/ labour for motor fitting motor opening and fitting labour /all. / 2 no motor opening and fitting in vill gaddi kheri and mokhra khas 4 motor spare parts & repairs/ rewinding of motor rewinding of 3.0 h.p motor with material& less cost of old materil /3.0 hp rewinding of motoer / in vill gaddi kheri and mokhra khas...

Due Date : November 28, 2023

Tender Value : ₹ 19800.0

View Tender
28
Public Health Engineering Department - Haryana

40808227 tender for ajaib block: maham panchayat: ajaib dist.: rohtak annual mtc. work for water supply. 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back 2 motor spare parts & repairs/ labour for motor fitting 3 motor spare parts & repairs/ motor fan 4 motor spare parts & repairs/ rewinding of motor 5 motor spare parts & repairs/ bearing...

Due Date : November 28, 2023

Tender Value : ₹ 19900.0

View Tender
29
Public Health Engineering Department - Haryana

40808221 tender for gorawar block: maham panchayat: girawar dist.: rohtak annual mtc. work for water supply motor spare parts & repairs/ carriage of burnt motor to workshop & back motor spare parts & repairs/ labour for motor fitting motor spare parts & repairs/ bearing motor spare parts & repairs/ rewinding of motor...

Due Date : November 28, 2023

Tender Value : ₹ 20000.0

View Tender
30
Public Health Engineering Department - Haryana

40808217 tender for annual maintenance works for water supply outsourcing of works/ outsourcing jobwork persons labour for various work /one job / job work of changing 2 pvc pipe line of village mokhra animal house and digging and connecting 2 pvs pipeline. material with labor complete in all respect....

Due Date : November 28, 2023

Tender Value : ₹ 19700.0

View Tender
31
Public Health Engineering Department - Haryana

40808170 tender for annual maintenance work for water supply ci valves/ c i d/f sluice valves repair of 100mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site, carriage charges from site to work shop and work shop to site including labour charge complete as per specification of engineer in charge complete in all respect, /100 mm sluice valves repair / kharakjattan...

Due Date : November 28, 2023

Tender Value : ₹ 20000.0

View Tender
32
Public Health Engineering Department - Haryana

40808162 tender for bhagpat , bhangera , bhangeri , group of 3 no. of habitations annual maintenance works for water supply. s.no. category description / item size / location unit quantity 1 outsourcing of works/ hiring of jcb hire charges of jcb with fuel and driver for excavation and other job works /hiring of jcb per hour basis / at village bahahurpur, khizrabad,bhagpat hrs. 9 2 outsourcing of works/ labour job for tee connection job work for labour of tee connection 100mm including cutting , jointing , testing etc. /100mm / at village bahahurpur, khizrabad,bhagpat nos. 5 3 ci specials/ c i p/e tee class 15 p/f tee 100x100x100mm complete in all respect. /100x100x100 mm / at village bahahurpur, khizrabad,bhagpat nos. 5 4 cid joints/ c i d joints class 15 providing and fixing cid joint 100 mm class 15 complete in all respect. /100 mm / at village bahahurpur, khizrabad,bhagpat nos. 18 5 ci valves/ c i d/f sluice valves providing and fixing of 100 mm sluice valve marked with 1.6 p.n. including the cost of nut bolts , rubber complete in all respect sheet.( arko, venus, leader, bir ,panja, upadhay /100 mm / at village bahahurpur, khizrabad,bhagpat nos. 5...

Due Date : November 30, 2023

Tender Value : ₹ 49218.0

View Tender
33
Public Health Engineering Department - Haryana

40808097 tender for annual maintenance works for water supply 1 outsourcing of works/ outsourcing jobwork persons _ the job work making the sewer connection joning the damage of old by various cquse so connecting the old s.w 200mm sewer line from one depth any other with the help of all making site, cement , cressoer , bazri, burma, labour complete in all respect. / job work for making connections of damaged sewer connection during execution of work with 6 pvc pipe and plumber 2 outsourcing of works/ outsourcing jobwork persons job work for discconction and rectification of insanitary and over size ferrule connection from main line (dismantling interlocking tiles excavation of earth work and removing of disconnection of over size ferrule of insanitary connection from 150mmi/d and 200mmi/d ac pipeline and pluge it etc with labour / job work for disconnection of insanitary connections including dismantling of cc road with the help of tractor compressor, excavation of pit, cutting and jointing 4 line, bailing out, testing of line and refilling of pit afterwards at tinku chicken corner near durga bhawan mandir rohtak town...

Due Date : November 28, 2023

Tender Value : ₹ 19450.0

View Tender
34
Public Health Engineering Department - Haryana

40808077 tender for subana block: salhawas panchayat: subana dist.: jhajjar annual maintenance. work for water supply. 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back carriage of burnt motor submersible motor of all sizes to workshop & back including loading and unloading. /all size submersible motor / 10 hp submersible motor at tubewell girdharpur near slc. nos. 1 2 motor spare parts & repairs/ labour for submersible motor lowering unlowering labour for submersible pump & motor lowering and lifting. /labour for submerseable lowering and unlowering / labour charges for 10 hp submersible motor lowering and unlowering at tubewell girdharpur near slc. nos. 1 3 pump spare parts & repairs/ repair job work repair of 10 h.p submersible pump including g.m bush,empeller,shaft repair including labour for opening and fitting of pump.all complete job works /10hp / at tubewell girdharpur near slc. nos. 1 4 motor spare parts & repairs/ rewinding of motor rewinding of submersible motor with including the cost of copper wire including credit of old material /10 hp / at tubewell girdharpur near slc....

Due Date : November 29, 2023

Tender Value : ₹ 19000.0

View Tender
35
Public Health Engineering Department - Haryana

40808049 tender for annual maintenance work for water supply 1 outsourcing of works/ outsourcing jobwork persons job work for excavation and bailing out water including labour charges / (hsr item no. 20.49.1) for scraping of filters , vnotch houdies and high level tank complete in all respect at water works jaitpur nos. 2 outsourcing of works/ outsourcing jobwork persons job work for miscellaneous works /job work for miscellaneous work / job work for scraping of 04 nos. filters and 04 nos. v notch houdies and 01 no. high level tank with manual labour work complete in all respect at water works jaitpur nos....

Due Date : November 28, 2023

Tender Value : ₹ 19694.0

View Tender
36
Public Health Engineering Department - Haryana

40808040 tender for annual maintenance w/s and sewerage in rantal housing gurgaon for the year 2015 16. 1 motor spare parts & repairs/ housing bush housing bush / g.m nos. 4 2 motor spare parts & repairs/ labour for rottor grinding and balancing motor routor balancing and grinding / grinding & balancing nos. 1 3 motor spare parts & repairs/ rewinding of motor 10 hp motor / 10 hp nos. 1 4 motor spare parts & repairs/ rewinding of motor slot repair / slot repair nos. 1 5 pump spare parts & repairs/ labor for repair of pump lifting and lowering of pump set / at site nos. 1 6 pump spare parts & repairs/ pump impeller pump impeller / impeller nos. 10 7 pump spare parts & repairs/ pump shaft sleeve pump shaft ss / ss nos. 1 8 pump spare parts & repairs/ stage bowl c i /stage bowl c i / ci...

Due Date : November 28, 2023

Tender Value : ₹ 13660.0

View Tender
37
Public Health Engineering Department - Haryana

40808037 tender for annual maintenance work for water supply 1 motor spare parts & repairs/ housing bush housing bush / gm 2 motor spare parts & repairs/ labour for rottor grinding and balancing motor routor balancing and grinding / grinding & balancing 3 motor spare parts & repairs/ rewinding of motor 10 hp motor / 10 hp 4 motor spare parts & repairs/ rewinding of motor slot repair / slot repair 5 pump spare parts & repairs/ labor for repair of pump lifting and lowering of pump set site 6 pump spare parts & repairs/ pump impeller pump impeller / impeller 7 pump spare parts & repairs/ pump shaft sleeve pump shaft ss / ss 8 pump spare parts & repairs/ stage bowl c i /stage bowl c i / ci...

Due Date : November 28, 2023

Tender Value : ₹ 16750.0

View Tender
38
Public Health Engineering Department - Haryana

40808032 tender for jakhauda block: bahadurgarh panchayat: jakhoda dist.: jhajjar annual maintenance work for water supply. s.no. category description / item size / location unit quantity 1 electrical items/ starter 20 hp starter repair complete in all respect. /20 hp starter repair / . nos. 1 2 motor spare parts & repairs/ labour for motor fitting carriage up & down /carriage up and down / . nos. 1 3 motor spare parts & repairs/ labour of slot repairing labour for repairing of slot. /15 hp / . nos. 1 4 motor spare parts & repairs/ labour for motor fitting motor opening and fitting labour /all. / . nos. 1 5 motor spare parts & repairs/ housing bush providing & fixing housing bush for 15 bhp submersible motor including credit of old material. /15 hp / . nos. 2 6 motor spare parts & repairs/ motor fan providing and fixing air fan for 7.5 hp motor complete in all respect. /air fan kirloshkar / . nos. 1 7 motor spare parts & repairs/ rewinding of motor rewinding of raw water motor with including the cost of copper wire complete including credit of old material. /15hp raw water / at pumping station at bws channel nos. 1 8 motor spare parts & repairs/ bearing supplying and fixing of ball bearing 6308 complete in all respect. /6308 / . nos. 2...

Due Date : November 28, 2023

Tender Value : ₹ 18000.0

View Tender
39
Public Health Engineering Department - Haryana

40808027 tender for lalgarh , baroli , kumarwali , nandawala , group of 4 no. of habitations annual maintenance.works for water supply. 1 outsourcing of works/ hiring of compressor hire charges for dismantling of cc road by tractor compressor per hour basis /hire charges tractor compressor for dismantling of cc road / village nandawala hrs. 3 2 outsourcing of works/ hiring of jcb hire charges of jcb with fuel and driver for excavation and other job works /hiring of jcb per hour basis / village nandawala hrs. 12 3 outsourcing of works/ dewatering job work hiring of tractor and monoblock pump on per hour basis including operator and diesel for dewatering of s.s tank, clear water tank, suction well etc. for different purpose i.e. cleaning, desilting, installing components like floating arm, n.r. valve, suction pipe etc. /dewatering by the tractor pankha / village nandawala hrs. 4 4 outsourcing of works/ outsourcing jobwork persons outsourcing of one number person for job work per day basis. /out sourcing of labour person / village nandawala nos. 2 5 cid joints/ c i d joints class 15 providing and fixing cid joint 100 mm class 15 complete in all respect. /100 mm / village nandawala nos. 4 6 cid joints/ c i d joints class 15 providing and fixing cid joint 150 mm class 15 complete in all respect. /150 mm / village nandawala...

Due Date : November 28, 2023

Tender Value : ₹ 19913.0

View Tender
40
Public Health Engineering Department - Haryana

40808020 tender for annual maintenance work for water supply 1 electrical items/ starter 20 hp starter repair complete in all respect. /20 hp starter repair / . 2 motor spare parts & repairs/ labour for motor fitting carriage up & down /carriage up and down / . 3 motor spare parts & repairs/ labour for motor fitting motor opening and fitting labour /all. / . 4 motor spare parts & repairs/ rewinding of motor rewinding of clear water motor with including the cost of copper wire including credit of old material / 15 hp /15hp clear water motor / at booster jakhoda 5 motor spare parts & repairs/ coupling for submersible motor coupling set with ms plate / providing and fixing of coupling set with ms plate for clear water motor...

Due Date : November 28, 2023

Tender Value : ₹ 17000.0

View Tender
41
Public Health Engineering Department - Haryana

40808013 tender for annual maintenance work for water supply 1 outsourcing of works/ hiring of jcb hire charges of jcb with fuel and driver for excavation and other job works /hiring of jcb per hour basis village amroli 2 outsourcing of works/ dewatering job work hiring of tractor and monoblock pump on per hour basis including operator and diesel for dewatering of s.s tank, clear water tank, suction well etc. for different purpose i.e. cleaning, desilting, installing components like floating arm, n.r. valve, suction pipe etc. /dewatering the tractor pankha / village amroli 3 outsourcing of works/ outsourcing jobwork persons job work for fitter helper for various site per month basis /job work for fitter helper / village amroli 4 outsourcing of works/ outsourcing jobwork persons outsourcing of one number person for job work per day basis. /out sourcing of labour person / village amroli 5 cid joints/ c i d joints class 15 providing and fixing cid joint 100 mm class 15 complete in all respect. /100 mm / village amroli 6 cid joints/ c i d joints class 15 providing and fixing cid joint 150 mm class 15 complete in all respect. /150 mm / village amroli...

Due Date : November 28, 2023

Tender Value : ₹ 19824.0

View Tender
42
Public Health Engineering Department - Haryana

40808006 tender for annual maintenance work for water supply 1 outsourcing of works/ hiring of jcb hire charges of jcb with fuel and driver for excavation and other job works /hiring of jcb per hour basis / near rock cinema, rasulpur road palwal town 2 outsourcing of works/ dewatering job work hiring of tractor and monoblock pump on per hour basis including operator and diesel for dewatering of s.s tank, clear water tank, suction well etc. for different purpose i.e. cleaning, desilting, installing components like floating arm, n.r. valve, suction pipe etc. /dewatering by the tractor pankha / near rock cinema, rasulpur road palwal town 3 outsourcing of works/ hiring of jcb providing jcb broker for dismentaling cc / providing jcb broker for dismentaling cc / near rock cinema, rasulpur road palwal town 4 miscellaneous items/ nut and bolt /mix nut bolt sizes / near rock cinema, rasulpur road palwal town 5 pipes / pvc pipe 6kgf providing and fixing 100 mm pvc pipe 6kg pressure isi marks /100 mm / rasulpur road palwal town 6 pipes / pvc pipe 6kgf providing and fixing 80 mm pvc pipe 6kg pressure isi mark complete in all respect. /80 mm / near rock cinema palwal town 7 outsourcing of works/ outsourcing jobwork persons job work for fitter helper for various site per month basis /job work for fitter helper / near rock cinema, rasulpur road palwal town 8 outsourcing of works/ outsourcing jobwork persons outsourcing of one number person for job work per day basis. /out sourcing of labour person / near rock cinema, rasulpur road palwal town 9 cid joints/ c i d joints providing and fixing cid joint 100 mm...

Due Date : November 28, 2023

Tender Value : ₹ 19910.0

View Tender
43
Public Health Engineering Department - Haryana

40807998 tender for annual maintenance work for water supply 1 motor spare parts & repairs/ housing bush motor housing bush / sohna town (gujjar ghati) nos. 2 motor spare parts & repairs/ labour for submersible motor lowering unlowering lowering and lifting / sohna town (gujjar ghati) nos. 3 motor spare parts & repairs/ rewinding of motor 7.5 hp rewinding sub. motor / sohna town (gujjar ghati) nos. 4 motor spare parts & repairs/ rottor sleeve rotter sleeve / sohna town (gujjar ghati) nos. 5 pump spare parts & repairs/ pump bush pump bush / sohna town (gujjar ghati) nos. 6 pump spare parts & repairs/ pump complete repair job repair of 30 hp clear water motor pump, pump bush, bearing seat complete in all respect / sultanpuria nos. 7 pump spare parts & repairs/ pump impeller pump impeller / sohna town (gujjar ghati) nos. 8 pump spare parts & repairs/ pump neckring pump neckring / sohna town (gujjar ghati) nos. 9 pump spare parts & repairs/ pump shaft sleeve pump sleeve / sohna town (gujjar ghati) nos. 10 motor spare parts & repairs/ labour of slot repairing /slot repairing / sohna town (gujjar ghati) nos....

Due Date : November 28, 2023

Tender Value : ₹ 29150.0

View Tender
44
Public Health Engineering Department - Haryana

40807991 tender for annual maintenance work for water supply motor spare parts & repairs/ rewinding of motor motor bush, insulation kit, lowering unlowering, rottor grinding and balancing, motor base bowel, thrust bearing set, t stud, nut and bolts, labour for slot repair, ghurka rent, labour for check and running motor and rubber jain 100 mm and copper wire new and less old wire complete job / bhamboor...

Due Date : November 28, 2023

Tender Value : ₹ 18900.0

View Tender
45
Public Health Engineering Department - Haryana

40807926 tender for biran , dhani biran , group of 2 no. of habitations annual mtc.works for water supply labour for rottor grinding and balancing. /all / at site motor overhauling and fitting charges /over hauling charges / at site prov. & fix. ball bearing 6306 nbc /6306 / 5hp raw water motor repair varnish / motor varnish glaind, grease etc. in motor / glain grease etc...

Due Date : November 30, 2023

Tender Value : ₹ 5800.0

View Tender
46
Public Health Engineering Department - Haryana

40807923 tender for annual maintenance work for water supply 1 motor spare parts & repairs/ carriage of burnt motor to workshop & back 2 motor spare parts & repairs/ labour for rottor grinding and balancing 3 motor spare parts & repairs/ labour for motor fitting 4 motor spare parts & repairs/ bearing 5 motor spare parts & repairs/ rewinding of motor...

Due Date : November 30, 2023

Tender Value : ₹ 19150.0

View Tender
47
Public Health Engineering Department - Haryana

40807913 tender for biran , dhani biran , group of 2 no. of habitations annual mtc.works for water supply. 1 motor spare parts & repairs/ labour for motor fitting 2 machinery items/ tyre coupling 3 motor spare parts & repairs/ bearing 4 motor spare parts & repairs/ insulation kit 5 motor spare parts & repairs/ insulation kit...

Due Date : November 30, 2023

Tender Value : ₹ 9100.0

View Tender
48
Public Health Engineering Department - Haryana

40807912 tender for annual maintenance work for water supply 1 motor spare parts & repairs/ labour for submersible motor lowering unlowering 2 motor spare parts & repairs/ housing bush 3 motor spare parts & repairs/ thrust plate 4 motor spare parts & repairs/ rewinding of motor 5 gi specials/ g i nipple 6 gi specials/ g i nipple 7 motor spare parts & repairs/ labour of slot repairing...

Due Date : November 30, 2023

Tender Value : ₹ 13100.0

View Tender
49
Public Health Engineering Department - Haryana

40807885 tender for dhani miran block: tosham panchayat: dhani miran dist.: bhiwani annual mtc. work for water supply rectification of pipe line leakage 4`` / repair of pipe line 100mm including labour, excavation cid joint, bailing out water complete in all respect. rectification of pipe line leakage3` / repair of pipe line 80mm including labour, excavation cid joint, bailing out water complete in all respect. rectification of pipe line leakage6` / repair of pipe line 150mm including labour, excavation cid joint, bailing out water complete in all respect....

Due Date : November 30, 2023

Tender Value : ₹ 19700.0

View Tender
50
Public Health Engineering Department - Haryana

40807837 tender for annual maintenance work for water supply 1 outsourcing of works/ rectification of w/s leakages job work rectification of pipe line leakage 4`` / repair of pipe line 100mm including labour, excavation cid joint, bailing out water complete in all respect. 2 outsourcing of works/ rectification of w/s leakages job work rectification of pipe line leakage3` / repair of pipe line 80mm including labour, excavation cid joint, bailing out water complete in all respect. 3 outsourcing of works/ rectification of w/s leakages job work rectification of pipe line leakage6` / repair of pipe line 150mm including labour, excavation cid joint, bailing out water complete in all respect. 4 outsourcing of works/ rectification of w/s leakages job work rectification of pipe line leakage8` / repair of pipe line 200mm including labour, excavation cid joint, bailing out water complete in all respect....

Due Date : November 29, 2023

Tender Value : ₹ 19450.0

View Tender