Maharshi Dayanand University - Haryana

34232300 supply of three seater chairs in common room of boys hostel no.10 in mdu, rohtak supply of three seater chairs in common room of boys hostel no.10 in mdu, rohtak , supply of three seater sofa with powder coated arms and legs perforated powder coated seat and back with out cushion and size in mm l 1750x d 710x h 755 as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro...

Panchayat Raj Department - Haryana

34232293 supply of tentage and lighting items for use in election tentage and lighting items for use in election , bariketting , behra delhi , big cooler , bulb ( 100w ) , ceiling , ceiling fan long pipe , ceiling fan / table fan , centre table with cover , chaddar , chair ( plastic / donlop ) , chair cover , chair with cover , chandani , cooler , cordless , dari , drum , dunlop chair , fan , gadda , gen set 25 kva , gen set 5 kva , gen set 62 kva , gen set silent 25 kva , gen set silent 62 kva , generator with diesel , glass , glass steel , green mat , halogen light , invertor battery , jug , kaleen , kanat , lecture stand , leg cover , light tube , mic operator , mic set with speaker , mice , operator gen set , parda , pedestal fan , pipe pandal , pole cover , single phase main , sofa with cover , speaker , stage , stage stair , table , table cloth , takhat , tentage 15x15 , three phase main , trey , trus , tube , unitex , waiter ( per 8 hours ) , wall , water jug , water proof...

Indian Army - Haryana

34226315 bids are invited for sofa set woodcrafts five seater tubular steel , glass and peg table centre table with toughened glass , peg table withtempered glass topsofa set five seater centre table with tempered total quantity : 14...

Department of Higher Education - Haryana

34216177 bids are invited for king size bed 1 with 2 side stool and storage , king size bed 2 with 2 side stool and storage , queen size bed 1 with 2 side stool and storage , queen size bed 2 with 1 side stool and storage , single bed with 1 side stool 6x4 and without storage , king size bed 3 with 1 side table and without storage , king size bed 4 with 1 side table and without storage , king size bed 5 with 1 side table and without storage , king size bed 6 with 2 side stool and storage , mattresses king size bed , mattresses queen size bed , mattress single bed , 2 seater sofa , 3 seater sofa 1 , center table 1 , 3 seater sofa 2 , center table 2 , 13 seater sofa set 3seater sofa 3 number and 2 seater sofa 2 number , 5 seater sofa 3 plus 1 plus 1 , center table 3 , 7 seater sofa 1 , center table 4 , 7 seater sofa 2 , 3 seater sofa 3 , center table 5 , 8 seater dinning table with chairs 1 , 6 seater center rotating dining table , coffee table 1 , coffee chairs 1 , t.v. unit 1 , wooden almirah , t.v. unit 2 , coffee table 2 , coffee chairs 2 , 8 seater dinning table with chairs 2 , office table , staff chair , visitor chairs 1 , file cabinet , officer office table , officer chair , visitor chairs 2 , back to back workstation of 8 people seating , back to back workstation of 4 people seating , linear workstation of 4 people seating along the wall , round reading table , 2 x 7 feet without partition along wall table , 3.5 x 7 feet without partition table , 3.5 x 7 feet with partition 36mm partical board table , sitting chairs , computer chair , circulation counter , property counter , periodical magazine rack , executive table 5 x 4 feet , 3 seater bench in steel ss 304 , new arrival display rack , conference table 12 seater , conference chair , conference chairman chair , dinning table 4 x 2.5 feet , stool 18 inch x 18 inch x18 inch , steel almirah...

Department Of Technical Education - Haryana

34187289 bids are invited for office table wooden 6x3 x 2.5, office table wooden 5x2.5x2.5 drawer on one side, office table wooden 5x3x2.5, computer table 4x2x2.5 with one sliding ket board tray having one draw with window door, wooden side table 3x1.5x2.5 with two drawer with key board tray, wooden rack 6 htx4 width x2 depth, wooden hanging book shelf with shutter, office computer chair revolving without arm, visitor chair with arm supreme, steel almirah with locker 48x36x20 magnetic white board, steel almirah, steel almirah with steel door, executive chair with arm revolving high back, steel book shelf 5*3*1.5 glass door, sofa set 5 seater teak wood, conference table teak wood 14 seater, conference chair teak wood, centre table , computer chair with arm , wooden lab stool, steel lab stool with arm and adjustable height, steel almirah 78*36*20 with both glass door, wooden leeture stand teak wood. red sheesham, total quantity : 777...

Health Department - Haryana

34181140 bids are invited for college and library furniture property counter , table for entry register , reading table for library , library chair , book rack , periodical display rack , office table , computer table , computer chair , circulation counter , table for principle , high back chair for principle , visitors chair for principle , sofa set , centre table , corner table , almirah , modular conference table , high back conference chair , medium back conference chair , student desk , book shelf , 6 door locker unit total quantity : 501...

Maharshi Dayanand University - Haryana

34153413 supply of furniture for boys hostel no. 1 ( kailash ) in mdu, rohtak supply of furniture for boys hostel no. 1 ( kailash ) in mdu, rohtak , supply of executive table size in mm w 1500 x d 750 x h 750 with particle boardtop as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of chair with high back chair, pp arms, gas lift, nylon base, pu moulded seat and back, fabric tapestry as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of visitor chair pp arms chrome plated pipe stand, seat and back, leatherite tapestry as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of wooden storage shelves, partical board structure size in mmw 900 x d 450 x h 2000 as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of modular conference table, partical board edeg and size in mmw 2400 x d 1200 x h 750 as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of visitor chairswithout arms, chrome plated pipe stand, fabric tapestry as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of computer table, partical board edge banded top and size in mm w 1200x d 600x h 750 as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of computer low back chair, pp arm, gas lift, nylone base, pu moulded seat and back, pp seat and back cover, push back, fabric tapestry as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro , supply of three seater sofa with powder coated arms and legs perforated powder coated seat and back and size in mm l 1750x d 710x h 755 as per photo attached complete in all respect to the entire satisfaction of engineer in charge. make geeken, durian, wipro...

Department of Higher Education - Haryana

34107104 bids are invited for revolving chair as per the boq , study chair as per the boq , visitor chair as per the boq , steel almirah as per the boq , steel almirah small as per the boq , metel bed as per the boq , study table as per the boq , office table as per the boq , library chair as per the boq , double sided reck as per the boq , library table as per the boq , 5 seater sofa as per the boq , center table as per the boq , refrigrator as per the boq , microwave oven as per the boq , hospital bed with mattress as per the boq total quantity : 138...

Indian Army - Haryana

34031878 bids are invited for sofa set single seater , center table , peg table wooden , office almirah or file storage , steel dustbin big , steel dustbin small , plastic dustbin 60 ltrs , wall fan , wall clock , printer all in one , aluminum door 4 x 7 ft with glass and door closure , wall paneling , aluminum partition 13 ft x 5 ft, coffee or tea or soup making wending machine , heatpillar , borosil glass set of 06 , cup and saucer set of 06 ,sun board 2 and half feet x 3 feet total quantity : 450...

Military Engineer Services - Haryana

33953382 special repair renewal of deficient wooden furniture against surveyed off board under ge ( north ) ambala cantt special repair renewal of deficient wooden furniture against surveyed off board under ge ( north ) ambala cantt , book case ( fd 237 ) , chair dining ( fd / e6 / map / 10 ) , chair easy cushioned ( fd 358 ) , side board small ( fd 371 ) , bath mat pvc ( fd / e6 / map / 07 ) , sofa set 5 ( 3+1+1 ) seater with cushion ( fd 281 ) , chair easy ( fd 229 ) ...

Police Department - Haryana

33943770 bids are invited for visitor chair , low back chair , medium back chair , conference mb chairs , conference hb chairs , executive table , sofa , center table , corner table , table , chairrevolving , waiting bench , computer table , conferencetable total quantity : 263...

Maharshi Dayanand University - Haryana

33934140 annual arte contract for tentage items for the year 2022 23, cane chair, velvet chair, dunlop sofa, sofa, white ceiling, coloured ceiling, whiter curtain. coloured curtain, water proof ceiling, bengali ceiling, dari. table, table cloth, sateen leg cover, leg cover, unitex green and red, kanat, takhat, pipe fitting, dunlop chair white cover, woolen carpet, drum, tub, jug, tray, stage, steel glass, ceiling fan, pedestal fan, pole cover, etc....

Maharshi Dayanand University - Haryana

33836297 supply of furniture for extension of vivekanand library, m.d. university, rohtak , providing and placing in position reading tables where worktop shall be made of 25mm thick medium density fibre board ( mdf ) . understructure : legs shall be fabricated by argo shield welding ms erw tube 50 mm x 25 mm x 1.2mm thk , 40 mm x 20mm x 1.2 mm thk with the base of the ms tube, fitted with a glide plate 5mm thk hr over which shall be a straight m8 leveler, fitted with bottom translucent cap, which shall allow for adjustment of the height by 50mm, support brackets 3 mm thk hr shall be welded on top side of leg for fixing top. cross members shall be made from 50 mm x 25 mm x 1.2mm thk ms erw tube. cross members shall be assembled by friction fit pdc joinery and grub screws. all cross members shall be mounted at a distance of 165 mm from worktop sides. cross connectors shall be fabricated by argoshield welding 3mm thk hr plate at ends. the product shall be bifma, indoor advantage gold, green pro & griha certified. the certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. a reading table 1500 w mm x 1200 d mm x 740 h mm , b reading table 2100 w mm x 1200 d mm x 740 h mm , providing and placing in position round reading table with overall size of the table shall be 1050 mm dia x 740 h mm. worktop: worktop shall be made of 25mm thick medium density fibre board ( mdf ) . understructure : it shall be made of metal frame fabricated by argo shield welding ms erw tube 50 mm x 25 mm x 1.2mm thk and then shall be powder coated with epoxy polyester. the legs shall be connected with the metal frames. legs shall be fabricated by argo shield welding ms erw tube 50 mm x 25 mm x 1.2mm thk, 40 mm x 40 x 1.2 mm thk, with the base of the ms tube a polycarbonate cap with m8 metal insert shall be fixed, on to which a straight m8 leveler shall be fitted to a bottom translucent cap which allows for adjustment of the height by 50mm. support brackets of 3 mm thk hr shall be welded on top surface of leg for fixing top. the product shall be bifma, indoor advantage gold, green pro & griha certified. the certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. , providing & placing in positionpanel & tile based workstation of size 1050x600x750mm with 52.4mm thick partition 1200mm height as main span and 22.8mm thick fin panels as per the layout. its construction is a unique combination of tiles and honey comb block ensures a sturdy gapless system with extensive wire management and easy accessibility to the inner frame. the panels are elevated from ground by 120mm with legs. the panels can be connected together with various post connectors in many geomatric configurations and support worktops via brackets and legs. a block of 52.4mm thick panel comprises of 38mm thick paper honeycomb + 3mm mdf on each sides + .6mm decorative laminate or fabric on both sides. particle board framing is used on outer boundary of the blocks as well as intermedicately at locations forming conduit for passing cables. panel vertical trims are made of aluminium extrusions. horizontal trims are made of aluminium extrusions at every division of tile / block. fabricated bottom frame comprises of l channels made of 2mm thick crca steel ( is:513 ) , formed plates of 3mm thock hr steel ( is:2062 ) & erw steel tube of size 35x15x1.6mm thick in oval cross section ( is:7138 ) welded together. this frame is bolted to the uprights with m6 screws.wire management provisioning shall be given to take wire in to the system through cable ducts from the junction boxes and it shall be carried upto the panels through concealed conduits inside the blocks. all the electrical wires / switches / data etc. shall not be part of furniture supply & extra as required. worktop shall be made of 25mm thick prelaminated particle board is 12823 grade with pvc edge banding.top tile shall have the combination of plain metal tiles made of .6mm thick crca sheet as per is:513 powder coated or laminated tiles 8mm thick prelmainated board confirming to is:12823 having allits edges with pvc edge banding. bottom tile shall be made of 8mm thick particle board confirming to is 12823 having all its edges with minimum .5mm thick edge banding. the product shall be greenguard ul, green pro cii, indoor advantage gold, griha & bifma level 2 certified. the certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. , providing and placing in positionreading chair without arm where the seat and back shall be made up of injection moulded high impact strength polypropylene polymer with indoor gate uv resistance. the dimensions of back shall be 51.6cm. ( w ) x 40.5cm. ( h ) and of seat shall be 52.5cm. ( w ) x 53.2cm. ( d ) . the tubular welded frame shall be made of 3.5±0.03cm x 1.5±0.03cm x 0.12±0.0128cm thk m.s. e.r.w. tube and welded connecting tube made of dia 2.22±0.03cm x 0.12±0.0128cm thk stainless steel 202 grade tube. the tubes shall be buff polished to give shiny finish. the shoes shall be made of high impact strength polypropylene polymer compound with indoor grade uv resistance and pressed fitted with tubular frame. the product shall be greenguard gold ul, green pro cii, indoor advantage gold & griha certified. the certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. , providing and placing in position steel almirah with overall size of 916 mm ( w ) x 486 mm ( d ) x 1980 mm ( h ) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm ( high yield strength ) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d’ grade high yield strength as per is:513. it should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it shall have 4 no.s full shelves. a4 size box file ( 85 w x 285 d x 345 h mm ) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns ( + / 10 ) . plenty of colour options and shelving options shall be available. there shall be 5 loading levels in almirah. the product shall be greenguard ul, green pro & indoor advantage gold certified. the certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. , providing and placing in positionsofa for teachers lounge with overall size of 900 w mm x 705 d mm x 790 h mm. seat understructure shall be made of using combination of 12 mm plywood vertical panels & pine wood longitudnal members. 2mm thick kraft board shall be stapled on the front side for foam sticking surface. seat shall be made of 100 mm pu slab stac foam pasted on the seat ply. 2 mm pu slab stack foam shall be pasted on the front & sides. the sofa shall be provided with 1 nos. of 6a electrical sockets with individaul switches. the electricals shall be safely housed in a box mounted on pinewood ection within the seat & power hall be supplied through 1.5 mtr arc cord with ceramic fuse. the back understructure shall be made of 12 mm plywood vertical panels & pine wood longitudnal members. 2mm thick mdf board shall be stapled on the front side for foam sticking surface. back shall be made with 50 mm pu slab stack foam, while 12mm pu slab stck foam shall be pasted along the sides & back. the back shall be upholstered with fabric. the legs shall be made of using seasoned teak wood finished with a clear matt coat of pu lacquer. the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified. , providing and placing in positionback to back sofa for teachers lounge with overall size of900 w mm x 1335 d mm x 790 h mm. seat understructure shall be made of using combination of 12 mm plywood vertical panels & pine wood longitudnal members. 2mm thick kraft board shall be stapled on the front side for foam sticking surface. seat shall be made of 100 mm pu slab stac foam pasted on the seat ply. 2 mm pu slab stack foam shall be pasted on the front & sides. the sofa shall be provided with 1 nos. of 6a electrical sockets ith individaul switches. the electricals shall be safely housed in a box mounted on pinewood ection within the seat & power hall be supplied through 1.5 mtr arc cord with ceramic fuse. the back understructure shall be made of 12 mm plywood vertical panels & pine wood longitudnal members. 2mm thick mdf board shall be stapled on the front side for foam sticking surface. back shall be made with 50 mm pu slab stack foam, while 12mm pu slab stck foam shall be pasted along the sides & back. the back shall be upholstered with fabric. the legs shall be made of using seasoned teak wood finished with a clear matt coat of pu lacquer.the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified. , providing and placing in positionsofa for teachers lounge with overall size shall be 1800 w mm x 705 d mm x 790 h mm. seat understructure shall be made of using combination of 12 mm plywood vertical panels & pine wood longitudnal members. 2mm thick kraft board shall be stapled on the front side for foam sticking surface. seat shall be made of 100 mm pu slab stac foam pasted on the seat ply. 2 mm pu slab stack foam shall be pasted on the front & sides. the sofa shall be provided with 2 nos. of 6a electrical sockets with individaul switches. the electricals shall be safely housed in a box mounted on pinewood ection within the seat & power hall be supplied through 1.5 mtr arc cord with ceramic fuse. the back understructure shall be made of 12 mm plywood vertical panels & pine wood longitudnal members. 2mm thick mdf board shall be stapled on the front side for foam sticking surface. back shall be made with 50 mm pu slab stack foam, while 12mm pu slab stck foam shall be pasted along the sides & back. the back shall be upholstered with fabric. the legs shall be made of using seasoned teak wood finished with a clear matt coat of pu lacquer. the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified. , providing and placing in positon table for teachers lounge. overall size of the table shall be 1350 w mm x 1350 d mm x 750 h mm. the worktop shall be made 18 mm thickmdf board with pu coating and 18+ / 1mm thick marine plywood with 0.6 mm thick backing laminate on bottom side. the worktop shall be be provided with a removable access lid for the electricals. the access lid shall be made using 12 mm thick corian ( matt finish ) . the understructure shall be made using fsc certified seasoned teak wood finished with a clear matt coat of pu lacquer. it shall have a 3 piece knock down structure. each of these peices shall be built by gluing members together using epoxy resin based adhesive. understructure assembly shall be done using alloy steel hardware ( blackened & coated with rust preventive oil ) . the power box shall be made with 1.2 mm thick crca sheet and shall be spot welded. it shall be epoxy polyster powder coated. the power box shall be provided with 6a electrical sockets ( 06 nos. ) , and rj45 jacks ( 2 nos. ) . power shall be supplied through a 1.5 mtr ac cord with ceramic fuse ( 5a ) . the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified. , providing and placing in positonchair for teachers lounge with overall size of 635 mm ( w ) x 630 mm ( d ) x 800 mm ( h ) and seat height of 455mm. the seat back shall be made of 15mm plywood ( as per is:503 ) panels connected using brackets made from 3mm hot rolled steel plates ( as per is:2062 ) powder coated in epoxy polyester ( dft 40 60 microns ) , 25mm pu slab stock foam is pasted onto the both sides of the shell and pinched together to achieve the radius along the periphery. the seat cushion is made using 50mm pu slab stock foam and upholstred in leatherette. the understructure is made of fsc certifed seasoned teakwood finhised with clear matt coat of pu lacquer. shell is fined to the understructure using alloy steel hardware ( blackened and coated with rust preventive oil ) . the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified. , providing and placing in positionstool for teachers lounge overall size of the stool shall be 450 w mm x 450 d mm x 453 h mm. the seat shall be made up of synthetic leather upholstered on pu slab stack foam of 6.5 + / 0.5 cm. it shall be fitted to the upholstered wooden batten box by bolting from inside. holding plate shall be made of hr steel of 0.3 + / 0.02 cm thick and shall be bolted to the upholstered seat assembly. seat size shall be 42 cm w x 42 cm d. it shall be a flip type stool & its casing shall be made of 1 + / 0.02 cm thick ms rod. it shall be powder coated 40 60 microns. casing shall eb coated with nano coat to improve the abrasion resistance of the surface. casing size shall be 440 w mm x 440 d mm x 375 h mm. side panel of wooden box batten shall be made of 0.9 mm thick plywood. the 4 corners of the batten box shall be made of solid wood which forms the radius. bottom portion of the batten box shall be covered with 1.2 cm thick rubberwood panel which shall be finished with a clear matt coat of pu lacquer. sides of wooden batten box shall be upholstered with synthetic leather with the backing unit of pu slab stack foam of 0.6 cm. upholstered wooden box can be flipped in the reverse way to use it as a desk surface by keeping it on the casing. batten box size shall be 400 w mm x 400 d mm x 274 h mm. the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified. , providing and placing in positiontable with overall size of 900 w mm x 900 d mm x 712 h mm. worktop shall be made of 18 mm thick membrane. the understructure shall consit of inner tube assembly with top plate for work mounting & an outer tube assembly for rectangular bottom plate. the inner & outer plate assemblies shall be telescopically conected. the top plate shall be made of 5 mm thick hot rolled steel plates & the bottom plate shall be made of 8 mm thick hot rolled steel plate. the inner tube assembly shall be made of 82.5x2 thick round electric resistance welded tube & 8 mm thick hot rolled steel plate welded together using tungsten insert gas welding. the outer tibe assembly shall be made of 89x2.5 thick & round electric resistance welded tube & 8 mm thick hot rolled steel plated welded together using tungsten insert welding. the whole structure shall be epoxy polyster powder coated ( dft 40 60 microns ) . the bidder / oem shall be iso 9001, iso 14001, iso 45001, greenguard ul, bifma level and indoor advantage gold certified....

Military Engineer Services - Haryana

33821203 special repair renewal of deficient wooden furniture against surveyed off items under ge ( north ) and ge ( south ) ambala cantt special repair renewal of deficient wooden furniture against surveyed off items under ge ( north ) and ge ( south ) ambala cantt , book case ( fd 237 ) , chair dining ( fd / e6 / map / 10 ) , chair dining ( fd 279 ) , chair easy cushioned ( fd 358 ) , side board small ( fd 371 ) , stool dressing ( fd / e6 / map / 14 ) , table dressing ( gents ) ( fd 379 ) , table dining 06 pers ( 1500x900x760mm ) ( fd 273 ) , table writing ( 1145x600x760mm ) ( fd 275 ) , table centre ( fd / map / 08 ) , peg table ( 450x300x380mm ) ( fd 277 ) , table bed side ( fd / map / 07 ) , teapoy ( 600x450x540mm ) ( fd 278 ) , table without drawer ( 900x600x760mm ) ( fd 284 ) , table with drawer ( 900x600x760mm ) ( fd 283 ) , chair dining ( fd 1105 ) , side board ( fd 241 ) , peg table ( fd / map / 11 ) , bath mat pvc ( fd / e6 / map / 07 ) , receptacle ( fd / e6 / map / 13 ) , sofa set 5 ( 3+1+1 ) seater with cushion ( fd 281 ) , table dressing ladies with mirror ( fd 378 ) , chair writing ( fd 280 ) , chair easy ( fd 229 ) ...

Department Of Sports And Youth Affairs - Haryana

33774284 bids are invited for metal bed for students , bedside table for student , student locker , chair for student room , single bed for officials rest room , mattress for officials rest room , bed side table for officials rest room , 1 seater sofa chair for officials rest room , 2 door wardrobe with mirror on doors for officials rest room , corner table for officials rest room , king bed for gos rest room , mattress for gos rest room , 2 door wardrobe with mirror on doors for gos rest room , 1 seater sofa for gos rest room , corner table for gos rest room , bed side table for gos rest room , visitor chair for officers room , two seater sofa for officers room , office almirah for officers room , officer table for officers room , officer revolving chair for officers room , executive table for staff room , visitor chair for staff room , office almirah for staff room , study table for library , study chair for library , glassdoor almirah for library , office almirah for library , dining table for student mess 8 seater , dining chair for student mess , dintbl 6str wood for officers mess , dining chair for officers mess , 4 door locker 16 locker in 1 set , three seater sofa for av room , single seater sofa for av room , centre table for av room , study chairs with writing pad for av room , table for doctor room , visitor chair for doctor room , examination table for doctor room , office almirah for doctor room , attendant bed with mattress for doctor room , three seater waiting chair for doctor room , revolving chair for doctor for doctor room...

Haryana Agricultural University - Haryana

33673048 quotation for display material/ infrastructure/ tentage for agro industrial exhibition, water proof hanger, ceiling, pipe fitting, red/green carpet, chair with white cover, maharaja/ vip carpet, sofa with white cover, centre table, truss gate pillar, water proofing, table with cover, side curtains, barricades fencing, round table, side cover frill, amp. set with mixer, pedestal/clamp fans, cooler jumbo, speaker box, color cordless mic, big mic. stands, monitor speaker box, led display wall etc....

Urban Local Bodies - Haryana

33630716 requirement of office furniture for councilor office of ward 23 zone 1 mc gurugram. 1 air conditioner o general 1.5 ton 2 supply, installation, testing & commissioning ofmultimedia projector with lcd technology, brightness :3000 ansi lumens or higher, min resolution : xga, short throw lens, contrast ratio: 3000:1, lamp life : 10000 hrs ( eco mode ) 3 providing revolving moduler workstation chair 1 personseating capacity ( geeken make ) 4 providing and installation of water cooler ( 180 ltr voltas ) complete in all respect. 5 providing and fixing w51d | led | hd ready | smarttv | built in subwoofer ( 55 inch ) ( 80cm ) ( sony bravia ) 6 providing deon office table in maple finish byroyaloak ( geeken make ) 7 supplying and placing in position primrose gantokleatherette 3+1+1 black sofa set ( geeken make ) 8 providing plastic chair 1 person sitting capicity ( neelkamal, superemo ) 9 analysis of rate for steel almirah geeken make, iso: 90001:2015 cetrified of office use ( steel almirah, 2 door, 4 adjustable shalf thickness 0.8 mm size in mm915x485x1980 mm modal gms 41 ) ...

Chaudhary Devi Lal University - Haryana

33545978 purchase of furniture for faculty house at cdlu, sirsa. purchase of furniture for faculty house at cdlu, sirsa. , providing and fixing of reception table of size 1800 x 680 x 1140(h) mm fabricated out of 18mm/25mm thick commercial ply with top made of 19mm thick prepolished granite ( cherry red ) over 19mm thick commercial ply with power and data outlet points and all internal surfaces and back to be finished with 4mm thick teak veneer. table should be finished with adequate provision for storage by way of drawers and shuttered storage with multipurpose locks/handles/drawer channel, etc. with accessories, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 01, item no. 1. (in waiting reception) , providing and placing storage st of size 1800 x 530 x 750 mm (h) fabricated out of 18mm/ 12mm/ 6mm thick commercial ply, teak wood skirting, shelves made of 18mm thick commercial ply complete in all respect as per drawing, storage shall comprise of 2 rows of filing drawers, drawers shall be fitted with drawer slides, handles, locks etc., ball catchers, external exposed surfaces shall be finished with 1.5mm thick laminate and all internal surfaces and back with 1.0mm thick laminate. shutters to be fabricated out of 18mm thick commercial ply finished with 1.5mm thick laminate, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 01, item no. 2. (in waiting reception) , providing and placing fully upholstered three seater sofa of size 2350 x 790 x 750 mm(h) with 4 rubber foam of jindal, sleepwell, mm foam in seat and 3 rubber foam in back, fabricated out of teak wood wooden members. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 01, item no. 3. (in waiting reception) , providing and placing static single seater sofa. the dimensions of seat should be610(w) x 620 mm(d) and of back shall be 610mm(w) x 850 mm(h). the seat shall be made up teak wood and woven cane with additonal portable cushioned back and seat upholstered with fabric of approved make. the moulded polyurethane foam used in the seat and back shall be of density [45 55]+/ 2kg/m ³, and hardness load 16+/ 2kgf as per is:7888 for 25% compression. the legs shall be made up of teak wood wood. the chair shall be fabricated correct to shape, all exposed wooden/veneer work to be finished in pu polish, complete in all respect sand to be manufactured strictly as per drawing no. 01, item no. 4. (in waiting reception) , providing and placing teak wood corner table of size 750 x 750 x 450 mm(h). table top shall have 4mm thick decorative teak veneer over 25mm (19 +6mm) thick commercial ply with teak wood edge lipping with teak wood wooden legs 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 01, 02,03,04 & 05 item no. 5, 6, 8, 6 & 3 respectively. (in waiting reception, meeting room, drawing & dining cm suit) , providing and fixing teak wood center table of size 1200 x 1200 x 450 mm(h). table top shall have 4mm thick decorative teak veneer over 25mm (19 +6mm) thick commercial ply with teak wood wooden legs 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 01, item no. 6. (in waiting reception, meeting room, drawing & dining cm suit) , providing and placing receptionist chair [godrej (versa neo mid back) or similar model of durian/nilkamal/wipro/veils make]. the overall dimensions of the chair shall be 76.1cm x 76.1cm x (98.6 116.1cm). the seat height shall be 44.5cm54.5cm. the cushioned seat and back is made of injection moulded plastic outer and inner. plaster inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 45kg per meter cube. the stitched cover is made from spacer fabric and leatherette. seat size shall be 47cm x 48cm. the back size shall be 45cm x 60.5cm. the armrests top is moulded from pu and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick ms erw tube. the chair shall be bifma level certified from bifma authorized certifier. the armrest height is adjustable upto 6.5cm in 5 steps. the chair shall be green guard certified from ul environment. the armrest structure is powder coated minimum 50 microns. it shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5 position tilt limiter, etc.. the chair shall be griha certified. seat depth adjustment is integrated in the seat through a sliding mechanism. seat depth adjustment range is 6cm. it shall also have adjustable back support. back frame is connected to up/down mechanism housed in plastic t spine. it can be adjusted fro 7.2cm for comfortable back support to suit individual need. the pneumatic height adjustment has an stroke of 10cm. the pedestal is injection moulded in black 33 % glass filled nylon 66 and fitted with 5 nos. of twin wheel castors. the pedestal is 66cm pitch center dia complete in all respects. (in waiting reception) , providing and placing fully upholstered three seater sofa of size 2350 x 790 x 750 mm(h) with 4 rubber foam of jindal, sleepwell, mm foam in seat and 3 rubber foam in back, fabricated out of teak wood wooden members. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 02, item no. 1. (in meeting room) , providing and fixing teak wood center table of size 680 x 1200 x 450 mm (h). table top shall have 4mm thick decorative teak veneer over 25mm (19 + 6mm) thick commercial ply with teak wood wooden legs 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 02, item no. 3. (in meeting room, cm suit) , providing and placing teak wood high table of size 1350 x 570 x 830mm(h). table top shall have 4mm thick decorative teak veneer over 25mm (19 +6mm) thick commercial ply with teak wood edge lipping supported over 25 x 75mm block board members. teak wood wooden legs reducing legs 62.5 x 62.5 mm at top, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 02, item no. 4. (inmeeting room) , providing and placing display unit of size 1800 x 530 x 830 mm(h). table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, sliding cabinets made of 18mm thick commercial ply storage shall comprise of 2 rows of filing drawers, internal surfaces of drawers shall be finished with 0.8mm thick laminate, drawers shall be fitted with drawer slides, locks etc., ball catchers. back to be finished with 0.8mm thick laminate over 6mm thick commercial ply. shutters to be fabricated out of 19mm thick commercial ply finished with 4mm thick teak veneer. teak wood wooden legs 62.5 x 62.5 mm at top and 40 x 40 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 02, item no. 5. (in meeting room) , providing and placing teak wood bed of size 1800 x 2100 mm made of 18mm plywood over 38 x 75mm hardwood members. exterior surfaces to be finished in 4mm thick decorative teak veneer over (12mm + 19mm) thick commercial ply with 35 x 4mm thick edge lipping with head board finished with quilting in leatherite over 50mm thick foam over 12mm thick commercial ply and edging in 50 x 25mm thick teak wood wooden band made to shape. teak wood wooden legs of size 100 x 100 mm with reducing ends, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no. 1. (in bed room cm suit) , providing and fixing teak wood bed side table of size 600 x 450 x 530mm(h) to be finished in 4mm thick decorative teak veneer over 19mm thick commercial ply consisting of two drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel etc. teak wood wooden legs of size 75 x 75 mm with reducing ends, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no. 1. (in bed room cm suit) , providing and placing fully upholstered three seater sofa of size 2000 x 900 x 800mm(h) with 4 rubber foam of jindal, sleepwell, mm foam in seat and 3 rubber foam in back, fabricated out of teak wood wooden members. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03 & 05, item no.2. (in bed room cm suit & vip dining) , providing and placing fully upholstered single seater sofa with 2 rubber foam of jindal, sleepwell, mm foam make in seat and back. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no. 3. (in bed room cm suit) , providing and placing fully upholstered easy chair with 2 rubber foam of jindal, sleepwell, mm foam make in seat and back. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no.4. (in bed room cm suit) , providing and placing static study chair. the dimensions of seat should be 475mm(w) x 475 mm(d) and of back shall be 480mm(w) x 755 mm(h). the seat shall be made up teak wood and woven cane with cushioned back upholstered with fabric of approved make. the moulded polyurethane foam shall be of density [45 55]+/ 2kg/m ³, and hardness load 16+/ 2kgf as per is:7888 for 25% compression. the legs shall be made up of teak wood. the chair shall be fabricated correct to shape and geometry, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03 & 06, item no. 5 & 2 respectively. (in bed room cm suit & guest room) , providing and fixing coat stand made of teak wood as per image and drawing to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no.6. (in bed room cm suit) , providing and placing cupboard of size 1300 x 600 x 2100 (h) with vertical members fabricated out of 12mm commercial ply over 25mm commercial board finished with 0.8mm thick laminate on interior surfaces and 4mm thick teak veneer on exterior surface, shelves made of 18mm thick commercial ply complete in all respect as per drawing. the shutters shall have 25mm wide teak wood wooden louvers at 25mm c/c distance fixed on teak wood wooden frame (75 x 25mm), shall be fitted with self closing hinges, ball catchers, handles, locks of approved make, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no.9. (in bed room cm suit) , providing and fixing of dressing table of size 1050 x 600 x 750 mm fabricated out of 4mm thick teak veneer over (6mm + 19 mm) thick commercial ply table top with 29 x 4mm thick teak wood edge lipping made to shape as per drawing with keyboard drawer made of 1mm thick laminate over 8mm thick commercial ply and teak wood edging made to shape. the drawers shall be fitted with drawer slides, handles, locks etc., shutters shall be fitted with self closing hinges, ball catchers, handles locks of approved make. teak wood wooden legs of size 62.5 x 62.5 mm at top and 38 x 38 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no.9. (in bed room cm suit) , providing and fixing teak wood luggage rack of size 1050 x 600 mm x 450mm with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick teak veneer with 25 x 6mm ss oval strips fixed at 75mm c/c distance as shown in drawing. vertical member over wall to be finished in 4mm teak veneer over 8mm thick commercial ply, all exposed wooden/veneer work to be finished in pu polish, complete in all respect sand to be manufactured strictly as per drawing no. 03, item no.9. (in bed room cm suit) , providing and fixing 1800 x 1100 mm lcd unit (excluding lcd) fabricated out of 4mm thick decorative teak veneer over 19mm thick commercial ply finished in pu polish. additional unit consisting of drawer of size 1200 x 225 x 300mm depth fabricated out of 4mm thick decorative white oak veneer over 12mm thick commercial ply with 12mm thick toughened glass on top of 1800mm length and 300mm width, and all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 03 & 05, item no. 10 & 6 respectively. (in bed room cm suit & vip dining) , providing and fixing of study table of size 1600 x 600 x 750 mm fabricated out of 4mm thick teak veneer over (6mm + 19 mm) thick commercial ply table top with 29 x 4mm thick teak wood edge lipping made to shape as per drawing with keyboard drawer made of 1mm thick laminate over 8mm thick commercial ply and teak wood edging made to shape. the drawers shall be fitted with drawer slides, handles, locks etc., shutters shall be fitted with self closing hinges, ball catchers, handles locks of approved make. teak wood wooden legs of size 62.5 x 62.5 mm at top and 38 x 38 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 03, item no. 11. (in bed room cm suit) , providing and fixing tea/coffee unit of size 1000 x 600 x 830mm(h) with vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 4mm thick teak veneer. vertical member over wall to be finished in 4mm teak veneer over 8mm thick commercial ply. table top with pre polished 19mm thick granite (cherry red) with edges moulded, over 19mm thick commercial ply, all exposed wooden/veneer work to be finished in pu polish, complete in all respect sand to be manufactured strictly as per drawing no. 03& 06, item no. 11 & 5 respectively. (in bed room cm suit & guest room) , providing and placing fully upholstered three seater sofa of size 2350 x 790 x 750 mm(h) with 4 rubber foam of jindal, sleepwell, mm foam in seat and 3 rubber foam in back, fabricated out of teak wood wooden members. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 04, item no. 1. (in drawing/dining cm suit) , providing and placing static single seater sofa. the dimensions of seat should be610(w) x 620 mm(d) and of back shall be 610mm(w) x 850 mm(h). the seat shall be made up teak wood and woven cane with additional portable cushioned back and seat upholstered with fabric of approved make. the moulded polyurethane foam used in the seat and back shall be of density [45 55]+/ 2kg/m ³, and hardness load 16+/ 2kgf as per is:7888 for 25% compression. the legs shall be made up of teak wood. the chair shall be fabricated correct to shape, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 04, item no. 2. (in drawing/dining cm suit) , providing and placing static teak wood dining chairs. the dimensions of seat should be 554 mm(w) x 560 mm(d) and of back shall be 471 mm(w) x 1020 mm(h). the seat shall be made up teak wood and upholstered with fabric and moulded polyurethane foam. the moulded polyurethane foam shall be of density [45 55]+/ 2kg/m ³, and hardness load 16+/ 2kgf as per is:7888 for 25% compression. the back and legs shall be made up of teak wood, all exposed wood/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 04, item no. 3. (in drawing/dining cm suit) , providing and placing teak wood dining table of size table 2100 x 1200 x 750mm(h) . table top shall have 1.5mm thick laminate over 25mm thick commercial ply, adequate hard wood framing members to support the top with teak wood edge lipping made to shape, legs to be made out of teak wood wooden members of size 75 x 75 mm on top and 50 x 50 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 04, item no. 4. (in drawing/dining cm suit) , providing and placing display unit of size 1200 x 530 x 830 mm(h). table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, sliding cabinets made of 18mm thick commercial ply storage shall comprise of 2 rows of filing drawers, internal surfaces of drawers shall be finished with 0.8mm thick laminate, drawers shall be fitted with drawer slides, locks etc., ball catchers. back to be finished with 0.8mm thick laminate over 6mm thick commercial ply. shutters to be fabricated out of 19mm thick commercial ply finished with 4mm thick teak veneer. teak wood wooden legs 62.5 x 62.5 mm at top and 40 x 40 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respect and to be manufactured strictly as per drawing no. 04, item no. 5. (in drawing/dining cm suit & vip dining) , providing and placing dining table of size 6000 x 1350 x 750mm(h) . table top shall have 1.5mm thick laminate over 19mm thick commercial ply, adequate vertical 16 gauge ss pipe 75 x 75mm supported on base of twin 16 gauge ss pipes of 50 x 50mm support the top framing members of 16 guage ss pipe of 50 x 50mm, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 05, item no. 1. (in vip dining) , providing and placing static teak wood dining chair. the dimensions of seat should be 420mm(w) x 450 mm(d) and of back shall be 420mm(w) x 880mm(h). the seat shall be made up teak wood and upholstered with fabric and moulded polyurethane foam. the moulded polyurethane foam shall be of density [45 55]+/ 2kg/m ³, and hardness load 16+/ 2kgf as per is:7888 for 25% compression. the back and legs shall be made up of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 05, item no. 4. (in vip dining) , providing and placing 900 x 2100 mm teak wood bed made of 18mm plywood over 38 x 75mm hardwood members. exterior surfaces to be finished in 4mm thick decorative teak veneer over 12mm + 19mm thick commercial ply with 35 x 4mm thick edge lipping with head board finished with 100mm wide x 12mm thick teak wood wooden panels to be fixed on 40 x 100mm wooden legs with flat nylon castors made as per shape . teak wood wooden legs of size 75 x 75 mm with reducing ends, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 1. (in guest room) , providing and fixing teak wood bed side table 900 (w) x 450 (d) x 530mm (h). to be finished in 4mm thick decorative teak veneer over 19mm thick commercial ply consisting of one drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel etc. teak wood wooden legs of size 75 x 75 mm with reducing ends, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 1. (in guest room) , providing and fixing teak wood side table of size 680 x 680 x 450 mm(h). table top shall be fabricated out of 4mm thick teak veneer over 25mm (6mm + 19mm) commercial ply with 29 x 4mm thick edge lipping made to shape. teak wood wooden legs of size 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 3. (in guest room) , providing and placing fully upholstered single seater sofa with 2 rubber foam of jindal, sleepwell, mm foam make in seat and back. the leatherite used shall be in the range of rs 500 600 per metre. arms and legs to be fabricated out of teak wood, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 4. (in guest room) , providing and fixing of study table of size 2100 x 570 x 750 mm(h) fabricated out of 4mm teak veneer over 6mm + 19 mm thick commercial ply table top with 29 x 4mm thick teak wood edge lipping made to shape as per drawing & to be finished in pu polish. the drawer shall be fitted with drawer slides, handles, locks etc. of approved make. the top shall rest upon 25 x 75 mm hard wood members over teak wood wooden legs of size 62.5 x 62.5 mm at top and 38 x 38 mm at bottom, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 5. (in guest room) , providing and fixing 1700 x 600 mm x 450mm teak wood luggage rack with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick teak veneer with 25 x 6mm ss oval strips fixed at 75mm c/c distance as shown in drawing. vertical member over wall to be finished in 4mm teak veneer over 8mm thick commercial ply, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 6. (in guest room) , providing and placing cupboard of size 600 x 1200 x 2100 (h) with vertical members fabricated out of 12mm commercial ply over 25mm commercial board finished with 0.8mm thick laminate on interior surfaces and teak veneer on exterior surface, shelves made of 18mm thick commercial ply complete in all respect as per drawing. the shutters shall have 25mm wide teak wood wooden louvers at 25mm c/c distance fixed on teak wood wooden frame (75 x 25mm), shall be fitted with self closing hinges, ball catchers, handles, locks of approved make, all exposed wooden/veneer work to be finished in pu polish, complete in all respects and to be manufactured strictly as per design and drawing no. 06, item no. 6. (in guest room)...

Irrigation Department - Haryana

33462483 bids are invited for book shelf , librarian table , library table , sofa set , side table , revolving chair , zebra blinds , visitor chair , wooden chair total quantity : 911...

Haryana Agricultural University - Haryana

33323643 quotations for display material/ infrastructure/ tentage for agro industrial exhibition at krishi mela (rabi) dated september 08 09, 2022 a. tentage material required: 1. water proof hanger 2. ceiling (15’x15’) 3. pipe fitting (15’x15’) 4. red/green carpet 5. chair with white cover 6. maharaja/vip carpet (5’x15’) 7. sofa with white cover 8. centre table 9. truss gate pillar 10. water proofing 11. table with cover 12. side curtains 13. barricades fencing 14. round table 15. side cover frill 16. one stage 15’x9’ at entrance b. sound system required : 1. amp. set with mixer cassette player with 4 horn feedback, amplifier, 3 batteries 12 v, 6 mics, 12 horn units rent 2. amp. set, 2 horn units, 2 mics and 1 battery rent 3. generator set 15 kvh with diesel rent 4. pedestal/clamp fans 5. cooler jumbo 6. big standing fan 7. speaker box 8. color cordless mic 9. big mic. stands 10. monitor speaker box 11. led display wall (10x8)...

Irrigation Department - Haryana

33300996 bids are invited for book shelf , library table , sofa set , side table , revolving chair , zebra blinds , visitor chair , wooden chair total quantity : 911...

Urban Local Bodies - Haryana

33273436 requirement of office furniture for councilor office of ward 23 zone 1 mc gurugram air conditioner o general 1.5 ton 2 supply, installation, testing & commissioning ofmultimedia projector with lcd technology, brightness :3000 ansi lumens or higher, min resolution : xga, short throw lens, contrast ratio: 3000:1, lamp life : 10000 hrs (eco mode) 3 providing revolving moduler workstation chair 1 personseating capacity (geeken make) 4 providing and installation of water cooler (180 ltr voltas) complete in all respect. 5 providing and fixing w51d | led | hd ready | smarttv | built in subwoofer (55 inch) (80cm) (sony bravia) 6 providing deon office table in maple finish byroyaloak (geeken make) 7 supplying and placing in position primrose gantokleatherette 3+1+1 black sofa set (geeken make) 8 providing plastic chair 1 person sitting capicity (neelkamal, superemo) 9 analysis of rate for steel almirah geeken make, iso: 90001:2015 cetrified of office use (steel almirah, 2 door, 4 adjustable shalf thickness 0.8 mm size in mm915x485x1980 mm modal gms 41) ...

Department Of Agriculture - Haryana

33265102 bids are invited for confrence table , high back chair , medium back chair , reception table , 3 seater sofa , 2 seater sofa , table , computer table , steel bookcase , lab stool , cabinet , small chair , notice baord , blinds total quantity : 800...

Northern Railway - Haryana

33199203 supply of p u foamp u foam,p u foam seat of mattress without cover sofa size 72x35x5 density 40 brand coirfoam, sleepwell, feather foam , p u foam seat for sofa (density 40) size 21x22x3, make sleepwell/coirfoam/feather foam...

Northern Railway - Haryana

33177345 supply of p u foamp u foam,p u foam seat of mattress without cover sofa size 72x35x5 density 40 brand coirfoam, sleepwell, feather foam , p u foam seat for sofa (density 40) size 21x22x3, make sleepwell/coirfoam/feather foam...

Haryana Board Corporation - Haryana

33161417 tender of tent for independence day celebration 2 waterproof stage 3 pipe stage truss 4 vip sofa 5 banquet chair with cover 6 banquet chair without cover 7 sofa 8 table 9 center table 10 masking facia 11 pipe pandal 12 carpet 13 genrator silent 14 p / a system complete 15 podium 16 fan 17 big cooler 18 wooden flooring 19 labour and cortage...

Indian Army - Haryana

33074053 bids are invited for 3 seater wooden sofa , 2 seater wooden sofa , revolving bar stool total quantity : 11...

Indian Army - Haryana

33073846 bids are invited for sofa set , bagpiper with box , bagpiper cover , bagpipers chanters reed , practice chanters , practice chanter reed , side drum stick , bugle , bugle cord , redcushion chair total quantity : 74...

Urban Local Bodies - Haryana

33062640 requirement of office furniture for councilor office of ward 23 zone 1 mc gurugram. r air conditioner o general 1.5 ton 2 supply, installation, testing & commissioning ofmultimedia projector with lcd technology, brightness :3000 ansi lumens or higher, min resolution : xga, short throw lens, contrast ratio: 3000:1, lamp life : 10000 hrs (eco mode) 3 providing revolving moduler workstation chair 1 personseating capacity (geeken make) 4 providing and installation of water cooler (180 ltr voltas) complete in all respect. 5 providing and fixing w51d | led | hd ready | smarttv | built in subwoofer (55 inch) (80cm) (sony bravia) 6 providing deon office table in maple finish byroyaloak (geeken make) 7 supplying and placing in position primrose gantokleatherette 3+1+1 black sofa set (geeken make) 8 providing plastic chair 1 person sitting capicity (neelkamal, superemo) 9 analysis of rate for steel almirah geeken make, iso: 90001:2015 cetrified of office use (steel almirah, 2 door, 4 adjustable shalf thickness 0.8 mm size in mm915x485x1980 mm modal gms 41) ...

Indian Army - Haryana

33040200 bids are invited for boq single seater sofa , boq two seater sofa , boq three seater sofa total quantity : 28...

Department of Higher Education - Haryana

33014280 bids are invited for king size bed 1 with 2 side stool and storage , king size bed 2 with 2 side stool and storage , queen size bed 1 with 2 side stool and storage , queen size bed 2 with 1 side stool and storage , single bed with 1 side stool 6x4 and without storage , king size bed 3 with 1 side table and without storage , king size bed 4 with 1 side table and without storage , king size bed 5 with 1 side table and without storage , king size bed 6 with 2 side stool and storage , mattresses king size bed , mattresses queen size bed , mattress single bed , 2 seater sofa , 3 seater sofa 1 , center table 1 , 3 seater sofa 2 , center table 2 , 13 seater sofa set 3seater sofa 3 number and 2 seater sofa 2 number , 5 seater sofa 3 plus 1 plus 1 , center table 3 , 7 seater sofa 1 , center table 4 , 7 seater sofa 2 , 3 seater sofa 3 , center table 5 , 8 seater dinning table with chairs 1 , 6 seater center rotating dining table , coffee table 1 , coffee chairs 1 , t.v. unit 1 , wooden almirah , t.v. unit 2 , coffee table 2 , coffee chairs 2 , 8 seater dinning table with chairs 2 , office table , staff chair , visitor chairs 1 , file cabinet , officer office table , officer chair , visitor chairs 2 , back to back workstation of 8 people seating , back to back workstation of 4 people seating , linear workstation of 4 people seating along the wall , round reading table , 2 x 7 feet without partition along wall table , 3.5 x 7 feet without partition table , 3.5 x 7 feet with partition 36mm partical board table , sitting chairs , computer chair , circulation counter , property counter , periodical magazine rack , executive table 5 x 4 feet , 3 seater bench in steel ss 304 , new arrival display rack , conference table 12 seater , conference chair , conference chairman chair , dinning table 4 x 2.5 feet , stool 18 inch x 18 inch x18 inch , steel almirah...

Indian Army - Haryana

32976176 bids are invited for 1.5 ton hot and cold split ac with 4 kva stablizer , double door freeze 375 ltr , sofa set 3 seater , sofa set 5 seater , centre table , dining table , peg table , serving food warmer , curtains with rod , masala chakki , steel bhatti ,gas chulla 4 burner , industrial mixer grinder big size ,steel rack for utensils storages , microwave large size ,steel table 4x2 feet total quantity : 105...

Director Supplies And Disposals - Haryana

32946532 tender for supply of group of items i.e. 01 no. list comprising of sr. no. 1 to to 44 (single lot of 44 items) 1. lg air conditioner 2. inverter 3. cooler 4. cooler symphony big 5. cooler symphony small 6. exhaust fan 7. heater 8. blower 9. pedestal fan 10. pedestal fan 11. pedestal fan 12. table fan 13. cycle 14. t.v trolly 15. t.v trolly 16. sterio with two speaker 17. franking machine 18. table lamp 19. table lamp 20. emergency light 21. map 22. wooden bench 23. torch 24. chownki 25. side rack wooden 26. fly killer 27. hot case 28. officer table 29. officer table 30. officer table 31. officer table 32. officer table 33. almirah big steel/iron 34. almirah big steel/iron 35. wooden almirah 36. plastic chair 37. sofa set 38. center table 39. wooden rack 40. computer chair 41. computer table 42. computer cushion 43. computer scale 44. weight &scale...

Department Of Agriculture - Haryana

32904043 bids are invited for conference table for conference hall , high back chair for conference hall , medium back chair for conference hall , reception table for reception , three seater sofa for lobby , two seater sofa for waiting room , office table for project officer room , office table for room and lab , computer table for offices , steel book case for lab , labstool for lab , back side cabinet , glass book cabinet , conference back side chair for conference hall , noticeboard , roman blind curtain total quantity : 800...

Military Engineer Services - Haryana

32853802 repairs and painting / polishing to all types of serviceable wooden furniture at hisar mil stn under ge hisar 1 repairing table card by replacing under mentioned unserviceable components with new one complete as per drg no fd 352 : 2 front and rear legs of ist class hard wood teak woodof size 760x40x75mm 3 rails of seasoned teak wood ( ist class hard wood ) size 100x25mm 4 drawers of existing size, shape and specification all as specified and shown on drg and including 25mm dia plastic casted knob. 5 table top of 18 / 19mm thick particle board, exterior grade, isi marked of size 900x900mm provided with 6mm thick all around teak edging and covered with green baize cloth of superior quality ofrate not less than rs 130 / per mtr asapproved by ge. 6 repairing table conference by replacing the under mentioned unserviceable components with new one complete as per drg no fd 287 : 7 legs of 1st class hard wood ( teak wood ) seasoned of size 760x60x75mm 8 long rail runner of seasoned teak wood ( 1st class hard wood ) size 2135x100x35mm 9 short rail runner after converting from the long rail retrieved from itemno 2.02 here in before. 10 stiffener of seasoned teak wood ( 1st class hard wood ) . 11 providing triangular wooden bracket of 1st class hard wood teak seasoned to joints of legs to long and short rail of the table. 12 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 13 repairing table bed side by replacing the under mentioned unserviceable components with new one complete as per drg no fd 276 : 14 top made out of 12mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white 15 back side 6mm thick back plywood commercial 16 bottom made out of 12mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 17 shelf made out of 12mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white 18 both sides made out of 12mm thick prelaminated mdf board, exterior grade, one side teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around. 19 repairing table centre by replacing under mentioned unserviceable components / parts with new one complete as per drg no fd 274: 20 legs of 1st class hard wood seasoned ( teak wood ) . 21 long rail of 1st class hard wood seasoned ( teak wood ) . 22 short rail ofist class hard wood seasoned ( teak wood ) . 23 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 24 repairing table centre brass by replacing under mentioned unserviceable components / parts with new one complete as per drg no fd 375 : 25 10mm thick plain tinted glass round edges ( smoke colour ) with vacuum rubber shoe at top 26 hard rubber shoe at bottom. 27 repairing table office steel 1520x860x760mm by replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 289: 28 legs of 1st class hard wood seasoned ( teak wood ) . 29 long rail of 1st class hard wood seasoned ( teak wood ) . 30 short rail by converting long rail as retrieved against item no 6.02 here in before. 31 stiffener of 1st class hard wood seasoned ( teak wood ) . 32 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 33 repairingchair wooden bottom by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 285: 34 front leg of 1st class hard wood seasoned ( teak wood ) . 35 rear legof 1st class hard wood seasoned ( teak wood ) . 36 side rail of 1st class hard wood seasoned ( teak wood ) . 37 front and back rail of 1st class hard wood seasoned ( teak wood ) . 38 stiffener of 1st class hard wood seasoned ( teak wood ) . 39 6mm thick ply wood commercial type bwr grade isi markedmade to the shape and to replace the unserviceable sheet complete. 40 repairing chair easy cushioned by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 358: 41 synthetic foam 40 density for seat and back as per existing size. 42 leatheriest rexene of approved shade with good texture and quality for seat and back. 43 repairing chair dining long back by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 357: 44 front leg of 1st class hard wood seasoned ( teak wood ) . 45 rear legof 1st class hard wood seasoned ( teak wood ) . 46 side rail of 1st class hard wood seasoned ( teak wood ) . 47 front and back rail of 1st class hard wood seasoned ( teak wood ) . 48 stiffener of 1st class hard wood seasoned ( teak wood ) . 49 synthetic foam 40 density for seat and back. 50 leatheriest rexene of approved shade with good texture and quality for seat and back. 51 repairing table 900x600x760mm with drawer by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 283: 52 legs of 1st class hard wood teak seasoned ( teak wood ) . 53 long rail of 1st class hard wood seasoned ( teak wood ) . 54 short rail by converting long rail as retrieved against item no 10.02 here in before. 55 stiffener of 1st class hard wood seasoned ( teak wood ) . 56 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 57 repairing table 900x600x760mm without drawers by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 284: 58 legs of 1st class hard wood seasoned ( teak wood ) . 59 long rail of 1st class hard wood seasoned ( teak wood ) . 60 short rail by converting long rail as retrieved against item no 11.02 here in before. 61 stiffener of 1st class hard wood seasoned ( teak wood ) . 62 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 63 repairing table dining for 6 pers by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 273: 64 legs of 1st class hard wood seasoned ( teak wood ) . 65 long rail of 1st class hard wood seasoned ( teak wood ) . 66 short rail by converting long rail as retrieved against item no 12.02 here in before. 67 bracket for joints of legs short rails & long rails made out of 1st class hard wood seasoned ( teak wood ) . 68 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 69 repairing of table dining 8 pers by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 273: 70 legs of 1st class hard wood seasoned ( teak wood ) . 71 long rail of 1st class hard wood seasoned ( teak wood ) . 72 short rail by converting long rail as retrieved against item no 13.02 here in before. 73 bracket for joints of legs short rails & long rails made out of 1st class hard wood seasoned ( teak wood ) . 74 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 75 repairing of table 2’x2’ ( 600x600x760mm ) by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 293: 76 legs of 1st class hard wood seasoned ( teak wood ) . 77 siderails of 1st class hard wood seasoned ( teak wood ) . 78 bracket for joints of legs short rails & long rails made out of 1st class hard wood ( teak wood ) seasoned. 79 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 80 repairingpeg table ( 450x300x380mm ) by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 277: 81 legs of 1st class hard wood seasoned ( teak wood ) . 82 long rail of 1st class hard wood seasoned ( teak wood ) . 83 stiffener of 1st class hard wood seasoned ( teak wood ) . 84 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 85 repairingtable 1800x900x760mm by replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 291: 86 legs of 1st class hard wood seasoned ( teak wood ) . 87 long rail of 1st class hard wood seasoned ( teak wood ) . 88 short rail by converting from long rail as retrieved against item no 16.02 here in before. 89 stiffener of 1st class hard wood seasoned ( teak wood ) . 90 table top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 91 repairing table dressing gents by replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 379: 92 table dressing top made out of 12mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 93 bottom and back made out of 12mm thick commercial plywood bwr grade. 94 both side made out of 12mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around 95 drawers of existing size shape and specification all as specified and shown on drg with 25mm dia plastic coated knobs. 96 mirror of existing size 380x760mm and 5.5mm thick electro copper plated of polished glass sheetcomplete with frame of teak wood and back plywood commercial 6mm thick. 97 repairing of table dressing ladies by replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 251: 98 table dressing top & bottom made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around. 99 both sides made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around. 100 back side made out of 12mm thick commercial plywood bwr grade. 101 drawers of existing size shape and specification all as specified and shown on drg and with 25mm dia plastic coated knobs. 102 front shutter made of 4mm thick plain glass of size shape and specification as shown on drg with aluminium double channel. 103 mirror of existing size 366x1220mm and 5.5mm thick electro copper plated of polished glass sheetcomplete with frame of teak wood and back plywood commercial 6mm thick. 104 m & l for repairing of bed hard by replacing the under mentioned unsv components / parts with new one complete as perdrg no fd 1102: 105 bed top made out of 12mm thick commercial plywood bwr grade duly isi marked. 106 stiffner of 1st class hard wood teak ( mp ) of size 890x60x40mm 107 long rail of 1st class hard wood teak ( mp ) of size 1980x90x35mm duly covered with 12mm thick prelaminated mdf board exterior grade with and including 6mm thick teak wood edging half rounded to exposed surafce all as shown on drg. 108 s&f new head board made out of 25mm thick prelaminated mdf board, exterior grade and having 40x40mm thick teak wood frame all around made to shape all as shown and applying polish on existing exposed wooden surface upto standard finish complete all as specfied and shown on drg. 109 s&f new foot board made out of 25mm thick prelaminated mdf board, exterior grade and having 40x40mm thick teak wood frame all around made to shape all as shown and applying polish on existing exposed wooden surface upto standard finish complete all as specfied and shown on drg. 110 repairing hat stand by replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 233: 111 front 4mm thick one side teak face ply wood 112 6mm thick teak wood edging of looking mirror and all around the hat stand 113 looking mirror of size as shown in drawing. 114 aluminium peg hook of size as shown in drawing. 115 repairing side board by replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 241: 116 top of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 117 front shutter made of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around. 118 drawers of existing size, shape and specification all as specified and shown on drg and with 25mm diaplastic coated knobs. 119 base batten of 1st class hard wood ( teak wood ) seasoned fixed with screws. 120 back side 6mm thick commercial ply wood bwr grade phenol formal dehyde. 121 both side made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around. 122 repairing teapoy wooden by replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 278: 123 legs of 1st class hard wood seasoned ( teak wood ) . 124 long rail of 1st class hard wood seasoned ( teak wood ) . 125 top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 126 repairingtable writing by replacing under mentioned unserviceable leg components / parts with new one complete as perdrg no fd 275 : 127 legs of 1st class hard wood seasoned ( teak wood ) . 128 long rail of 1st class hard wood seasoned ( teak wood ) . 129 sides of 18 / 19mm thick prelaminated mdf board, exterior grade, one side teak veenred face and other balancing white 130 ply wood 6mm thick commercial type of back side 131 topmade out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 132 repairing bench workshopby replacing under mentioned unserviceable components / parts with new complete as perdrg no fd 301: 133 legs of 1st class hard wood seasoned ( teak wood ) . 134 long rail of 1st class hard wood seasoned ( teak wood ) . 135 short rail by converting long rail as retrieved against item no 24.02 here in before. 136 stiffener of 1st class hard wood seasoned ( teak wood ) . 137 table top made out of 40mm thick teak wood plankssingle piece length, wrought finish all as shown on drg. 138 repairingalmirah mess utensilby replacing under mentioned unserviceable components / parts with new one complete as perdrg no fd 93 ( m ) : 139 top made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around the top. 140 front shutter made of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing white with and including 6mm thick teak wood half rounded edging all around. 141 drawers of existing size shape and specification as shown in drawing. 142 base batten of 1st class hardwood ( teak wood ) seasoned fixed with screws. 143 back side 12mm thick commercial ply wood bwr grade phenol formal dehyde. 144 both side made out of 18 / 19mm thick prelaminated mdf board, exterior grade with one side decorated teak veenred face and other balancing whitewith and including 6mm thick teak wood half rounded edging all around. 145 preparing old polished wooden surfaces by sand paper and applying one coat of french polish on exposed surfaces of following furniture articles complete : 146 chair dining long back as per drg no fd 357 147 bin soild linen multipurpose as per drg no fd 244 & fd / e6 / map / 09 148 bed ply top as per drg no fd 246 149 chair writing as per drg no fd 280 150 chair easy as per drg no fd 229 151 chair dining as per drg no fd 279 152 chair dining with detachable cushion as per drg no fd / e6 / map / 10 ( r ) 153 chair easy cushioned as per drg no fd 358 154 chair wooden bottom as per drg no fd 285 155 hat stand with mirror as per drg no fd 233 156 sofa set 5 seater as per drg no fd 373 157 sofa set 4 seater as per drg no fd 373 158 side board as per drg no fd 241 159 table dining 6 pers as per drg no fd 273 160 table dining 8 pers as per drg no fd 273 161 table writing as per drg no fd 275 162 table centre as per drg no fd 274 163 table peg as per drg no fd 384 164 teapoy ( w ) as per drg no fd 278 / fd 382 165 table 900x600x760mm as per drg no fd 231 / fd 233 / fd 284 166 table 900x600x760mm ( w ) with drawer as per drg no fd 231 / fd 283 167 table dining 120x90cm as per drg no fd 213 168 table bed side as per drg no fd 276 169 table dressing ladies as per drg no fd 378 170 table dressing gents as per drg no fd 230 171 stool dressing cb as per drg no fd 252 172 table card as per drg no fd 288 173 table conference as per drg no fd 287 174 table 600x600mm as per drg no fd 293 175 almirah mess utensils as per drg no fd 93 176 table 1520x860x760mm as per drg no fd 289 177 bench workshop as per drg no fd 301...

Private Company - Haryana

32847016 tender for salvage of material damaged by fire at m/s nmp motors. disposal of fire affected items motorcycle fully destroyed, motorcycle partially damaged, scooter partially damaged, mopped partially damaged, chairs, sofa set, sales counter, wardrobes, electrical cables etc....

Gurugram University - Haryana

32814916 supply and installation of furniture in gurugram university, sec 51,gurugram. , ns items , executive table, particle board top w1800 x d1650 x h750. (model no. exclusive 7) make: geeken , high back chair, cushioned chrome arm, aluminium, base, gas lift, synchro knee tilt. (model no. orion 1) make: geeken , visitor chair, wooden frame, cushion arm, chrome plated pipe stand(color as per orion 01)leatherite tapestry. (model no. civic 3) make: geeken , visitor chair, pu arm, chrome plated pipe stand, seat & back fabric tapestry. (model no. gv 618) make: geeken , centre table, s.s. pipe frame, chrome finish,toughened black glass top 12mm thick(1200x600). (model no. lexia) make: geeken , two seater sofa, wooden frame, chrome plated pipe frame legs.size in mm 1475(l) x 760(d) x 860(h) letherite tapestry.(model no.chicago 2) make: geeken , high back chair, silver pp cushion arms, gas lift,silver pp base torsion bar leatherite tapestry. (model no.gp 138a) make: geeken , executive table, particle board topw1500 x d1650 x h750 . (model no. numero 08(colour as per selection) make: geeken...

Urban Local Bodies - Haryana

32774996 requirement of office furniture for councilor office of ward 23 zone 1 mc gurugram. , air conditioner o general 1.5 ton , supply, installation, testing & commissioning of multimedia projector with lcd technology, brightness : 3000 ansi lumens or higher, min resolution : xga, short throw lens, contrast ratio: 3000:1, lamp life : 10000 hrs ( eco mode ) , providing revolving moduler workstation chair 1 person seating capacity ( geeken make ) , providing and installation of water cooler ( 180 ltr voltas ) complete in all respect. , providing and fixing w51d | led | hd ready | smart tv | built in subwoofer ( 55 inch ) ( 80cm ) ( sony bravia ) , providing deon office table in maple finish by royaloak ( geeken make ) , supplying and placing in position primrose gantok leatherette 3+1+1 black sofa set ( geeken make ) , providing plastic chair 1 person sitting capicity ( neelkamal, superemo ) , analysis of rate for steel almirah geeken make, iso: 90001:2015 cetrified of office use ( steel almirah, 2 door, 4 adjustable shalf thickness 0.8 mm size in mm 915x485x1980 mm modal gms 41 ) ...

Ministry Of Urban Development - Haryana

32721708 bids are invited for executive table , executive back drop , high back revolving chair , medium back revolving chair , sofa 3 seater , centre table , modular partition , door , work station , mediumback revolving chair 2 , overhead storage , cabinet ,multieater total quantity : 328...

Haryana Urban Development Authority - Haryana

32709590 purchase of furniture equipment and furniture in hsvp new office in sector 8, u / e, ambala city office providing table and visitor chairs 1 n.s ) office table ( made of high density board with side each for complete87 x 42 x 30 ( h ) 54 x 18 2 n.s ) sofa 2 seatssofa 2 seats frame made of solid wood, springs in seat superior leather high quality. 3 n.s ) visitors chairchairs made of steel & chrome seat high density four withcovering of mesh fabricback rest of mesh...

Indian Army - Haryana

32639374 bids are invited for sofa set 9 seater multipurpose total quantity : 1...