Haryana Urban Development Authority - Haryana

33887479 annual maintenance of hsvp staff quarters in sector 16, faridabad. brick work, concrete, cement plaster, white wash, floor tile in h.no. 2797gf, 2704 gf and 2710 gf in sector 16, faridabad and all other work contingent thereto ...

Central Public Works Department - Haryana

33831110 development of gehoon vihar park, repairing of paver block, plinth and exterior white wash in residential building at gehoon vihar campus, icar iiwbr, karnal, haryana...

Public Health Engineering Department - Haryana

33736796 annual maintenance water supply scheme village chhapera repair of boosting station, slab, boundary wall, iron gate, white wash in village salaheri ( sbs no. 1, 2, 3, 4 ) and all other works contingent thereto...

Haryana Vidyut Prasaran Nigam Limited - Haryana

33734375 repair and maintenance of door, window, white wash, electric work, sanitary item in quarter no 1, 3, 5, type iii, qtr no 12, 13, 14 type 2 and 1, 6, 9 type 1 in hvpnl colony, jharsa road, gurugram repair and maintenance of door, window, white wash, electric work, san ...

Central Public Works Department - Haryana

33694695 development of gehoon vihar park, repairing of paver block, plinth and exterior white wash in residential building at gehoon vihar campus, icar iiwbr, karnal, haryana...

Panchayat Raj Department - Haryana

33600872 bir khairi upgradation of panchayat gh... scrapping of old white wash, interior paint, exterior paint at village bir khairi...

Panchayat Raj Department - Haryana

33597965 upgradation of school rooms at village thana block pehwoa plastering ,white wash, door window ,wall tile ,tile tracing at village thana block pehowa ...

Haryana Urban Development Authority - Haryana

33532970 annual maintenance of water supply scheme in sector 7,u e sonipat repair pump chamber with white wash, distempering, painting of pump chamber and ugt tank water works in sector 7 u e sonipat complete in all respect and all other works contingent thereto...

Haryana Urban Development Authority - Haryana

33532967 annual maintenance of water supply scheme in sector 7, u e gohana special repair of pump chamber with white wash, distempering, painting, providing and fixing of flush door shutters etc at water works sector 7, u e gohana and all other works contingent thereto...

Haryana Urban Development Authority - Haryana

33013863 annual maintenance of water supply scheme in sector 14, rohtak, “ repair of staff quarter by white wash, painting, providing fixing chowkats for door & window etc. near boosting station in sector 14, rohtak and all other works contingent thereto...

Haryana Urban Development Authority - Haryana

32884249 annual maintenance of water supply scheme in sector 14, rohtak, “ repair of staff quarter by white wash, painting, providing fixing chowkats for door & window etc. near boosting station in sector 14, rohtak and all other works contingent thereto...

Haryana Urban Development Authority - Haryana

32708705 annual maintenance of hsvp office complex in sector 15 u e sonipat repair of toilet blocks on ist and 2nd floor including white wash, distempering, painting, providing and fixing of flush door shutters et. and all other works contingent thereto...

Public Health Engineering Department - Haryana

32622836 annual maintenance a / mtc. water supply scheme village chhapera repair of boosting station, slab, boundary wall, iron gate, white wash in village salaheri ( sbs no. 1, 2, 3, 4 ) and all other works contingent thereto...

Haryana Urban Development Authority - Haryana

32579563 annual maintenance a / mtc. of hsvp, staff quarters in colony no. i, sector i, rohtak repair of staff quarter no. i and2with white wash, distempering, painting, providing fixing of chowkat, flush door and wire guage door, etc...

Haryana Urban Development Authority - Haryana

32572184 annual maintenance a / mtc. of water supply scheme in sector 14, rohtak repair of boosting station by white wash, painting, providing and fixing of chowkats for door and window and cleaning of jungle at site of boosting station sector 14, rohtak...

Haryana Urban Development Authority - Haryana

32563364 annual maintenance of link scheme of l / s work in atal park in sector 8 and 9 part ii, karnal. ( painting of grill, toe wall, main gate, tree guard, white wash around the trees with one year of mtc and defect liability period free of cost and all other works contingnet thereto ) ( painting of grill, toe wall, main gate, tree guard, white wash around the trees with one year of mtc and defect liability period free of cost and all other works contingnet thereto ) ...

Urban Local Bodies - Haryana

32480148 construction of compost pits for wet waste in mc ateli mandi excavation for foundation and base, brick work for foundation and partition, brick ballast, pcc, cement plaster, cc for base, gsb or wbm for pathway, cc , galvanized sheet for teen shade and white wash etc...

Forest Department - Haryana

32392962 repair of pheasant breeding aviary , white wash in guard hut and class iv quarter at pbc morni and repair of inspector wildlife residence and white wash and colour wash of guard hut at iwl company bagh, ambala. ...

Public Health Engineering Department - Haryana

32392953 annual maintenance water supply scheme village ferojpur rajput repairing of boosting station, white wash and jungle clearance sbs in village ferojpur rajput distt. palwal and all other works contingent thereto...

Public Health Engineering Department - Haryana

32392938 annual maintenance water supply scheme village ferojpur rajput under ibs ferojpur rajput.repairing of boosting station, white wash and jungle clearance sbs in village bichpuri distt. palwal and all other works contingent thereto...

Haryana Vidyut Prasaran Nigam Limited - Haryana

32361415 execution of work for repair & raising of height of front side boundary wall with angle & barbed wire at 132kv s / stn.bhore & providing white wash / painting of boundary wall at 220kv s / stn. dhurala...

Haryana Urban Development Authority - Haryana

32312860 annual maintenance of water supply scheme in sector 14, u e sonipat repair of staff quarters with white wash distempering, painting, providing and fixing of flush door shutters etc. in hsvp staff quarter and all other works contingent thereto. including one year mtc. and defect liability period free of cost...

Cooperative Sugar Mills Societies - Haryana

32214153 tender for cleaning, painting and white wash for various equipments in process section during off season 2022 tender for cleaning, painting and white wash for various equipments in process section during off season 2022...

Public Health Engineering Department - Haryana

32131927 updation & renovation of old water works, strengthening of distribution system and providing functional household tap connection ( fhtc ) at village odhan distt. sirsa. ( under jal jeevan mission ) construction of pump chamber 28x13, rcc suction & scour well 6x4 each, 1 no. high level tank of size 36x25, re laying of pipeline at head works, sluice valve hoddies, plinth protection, ipb road and path, distribution system, repair of s / s tank, repair of boundary wall, repair of filter beds, clear water tanks, painting & white wash, prov. fht connections and prov. installation of pumping machinery and all other works contingent thereto at water works odhan.=> limited...

Haryana Vidyut Prasaran Nigam Limited - Haryana

32120142 tender for 1. painting of tf t 3 and its bay equipments at 66kv s/stn. naraingarh during the year of 2021 22. 2. white wash at non residential building at 66kv si stn. naraingarh during fy 2022 23....

Haryana Vidyut Prasaran Nigam Limited - Haryana

32093092 1. painting of tf t 3 and its bay equipments at 66kv s stn. naraingarh during the year of 2021 22. 2. white wash at non residential building at 66kv s stn. naraingarh during fy 2022 23....

Panchayat Raj Department - Haryana

32000516 the painting white wash and construction iron shed ( 30 25 ) in park at village moran wali g.p peerkhera block rania distt. sirsa...

Cooperative Sugar Mills Societies - Haryana

31980624 tender for cleaning, painting and white wash for various equipments in process section during off season 2022 1 inside, outside cleaning, painting of clarification house units such as juice & water weighing scale, juice sulphitor, surup sulphitor, sulphur furnace, air compressors, door clarifier, rotory vacuum filters, milk of lime station, railing, unsulphured, sulphured& other pip [ e lines, emptying / bricks filling in scrubbers, dsm and bagacillo screens white washing of lagging bodies. 2 inside , outside cleaning painting / oiling and white washing of all pansvapour pipes, valves, condensers, syrup, molasses and other pipe lines, all crystallizers including vacuum crystallizers, seed crystallizers, cold, hot and condensate water tanks, railings and all related jobs. 3 inside , outside cleaning paintingof all auto& continuous centrifugal machines, baskets, gutters , molasses receiving tanks, transient heaters, pugmills, magma mixers, sugar melter, brown sugar melter, , sgar hoppers, hot and cold blowers, grader, cfgs air compressors, sugar and seed elevators, sugar bins stackers, molasses weighing tanks, all pipe lines of cfg house, injection house , suction & delivery lines header railing etc. 4 upper an lower tube plate cleaning of all evaporator bodies and juice heaters & ffe . cleaning of inside shell, save all , entrainment catchers, syrup distribution coils, inside vapour lines of bodies , vapour pipes upto condensers, 02 nos quad condensers with their nozzles & pockets. double coat primer painting is to be done inside the right angle valves of each body . inside oiling of body shells cleaning of cut over pipe lines , valves, both unsulphured syrup bottles etc.complete inside and outside cleaning, painting , oiling, white washing of evaporator and juice heater station.cleaning and painting of condensate pit, railing etc and cleaning of platform, ground floor below evaporator station . tube cleaning of ffe through flexible shaftafter open top cover of ffe. 5 cleaning of mechanical effluent treatment plant, its channels, grease traps, equalissing tanks, primary clarifier, secondary clarfier, aeration tanks, lime tanks, sludge beds, sumps, liquidation of water from all tanks painting and white washing after cleaning. 6 mill has two nos. molasses storage tanks of capacity 45000 qtls each cleaning of molasses storage tanks is done by the contractor on labour rate basis. the work involves liquidation of remaining molasses of tanks and filling into molasses tankers, sludge removal from the bottom and inside cleaning. 7 to remove all sludge / malwa from drains of boiling house, mill house and oil & grease catcher, cleaning of all drains up to g.t. road and g.t. road to lagooning tanks. cleaning of lagooning tank no.1 & 2 and connecting channels. 8 cleaning, white washing of spray pond, injection channels, mini cooling plant, cleaning painting of spray pumps section and delivery pipes, spray water pipe line, headers cleaning of spray nozzles, lines, bends, cleaning of injection channels straimers, all malwa / sludge of spray pond, injection channels including previously left out malwa will be thrown by the cintractor at the said place....

Kendriya Vidyalaya Sangathan - Haryana

31979331 bids are invited for enamel paint , anti corrosive paint , emulsion paint matt , distemper , red oxide ochre , chuna for white wash , putty, chuna powder total quantity : 49160...

Health Department - Haryana

31877637 bids are invited for boq 1 heavy duty aluminium works for 400 sq. ft. , boq 2 glass works 5mm for 150 sq. ft. , boq 3 white wash & paint works for 1000 sq. ft. ( double coat ) total quantity : 3...

Military Engineer Services - Haryana

31860672 comprehensive br repairs to joinery plumbing sanitary fittings and flooring items at 513 ad msl regt and 948 ad wksp of age br i south under ge south ambala cantt material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg / square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar ( 1:4 ) including dismantling of existing tiles etc including cement mortar bedding ( but not backing ) andrubbish off the premises complete all as specified and directed. 2 material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg / square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar ( 1:4 ) including dismantling of existing tiles etc including cement mortar bedding ( but not backing ) andrubbish off the premises complete all as specified and directed. 3 material & labour forpremium quality coloured glazed ceramic tiles ( 300x 450x 7mmthick ) in vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 including dismantling of old floor or wall tiling including cement mortar bedding and removing the rubbish outsidethe defence land complete all as specified and as directed. 4 material & labour for 18 20 mm thickgranite stone slab of any type with table rubbed and polished as in slab / platforms and like set in cement mortar 1:4 including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match the shade of granite slabincluding dismantling of existing stone / tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. 5 material and labour for machine cut kota stone slab 20 25 mm thick ( size of each stone not less than 55cm x 55cm ) , laid in flooring, over and including cement screed bed 20mm thick in cement mortar ( 1:6 ) base set and jointed in neat cement slurry @ 3.00 kg / sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing ( granite finish ) including dismantling of existing stone / tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. 6 material and labour for machine cut kota stone slab 18 20 mm thick ( size of each stone not less than 55cm x 55cm ) , laid on vertical surfaces of skirting / dado, over and including cement screed bed 15 mm thick in cement mortar ( 1:4 ) and set and jointed in neat cement slurry @ 3.00 kg / sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing ( granite finish ) including dismantling of existing stone slab / tiles etc including cement mortar bedding ( but not backing ) andrubbish off the premises complete all as specified and directed. 7 matrerial and labour for 40mm thick average thicknesspcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate as in levelling course / paddingover roof surface, surface to be finished even and smooth with using extra cementincluding demolition of cement concrete ( unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 8 material and labour for 100mm thickpcc1:3:6 type c 2 using 40mm graded aggregate as sub base of floor including demolition of cement concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level ) or complete all as specified and directed. 9 material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m 35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. 10 material and labour for plain cement concrete 1:2:4 type b 1 ( using 20 mm graded mechanically crushed stone aggregate ) asroof kerbs or mud stops and the like, rounded or chamfered on edges complete including demolition of cement concrete ( unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 11 taking down cement plaster of any description and in any position including raking outfor keys, scrubbing down with water etc of any thikness & brick or stone wall etc. cement or cement lime plaster any description complete all as specified and directed. 12 material and labour for rendering 15 mm thick on fair face of brick work , concrete surfaces in cement mortar 1:6 finished even and smooth w / o extra cement complete all as specified and directed. 13 material and labour for rendering 15 mm thick on fair face of brick work , concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. 14 material and labour for 10mm thick cement plaster in cm ( 1:3 ) to ceiling surfaceand finished the surface even and smooth without using extra cement with and including applyingthree coats of whitewash on ceiling complete all specified and directed. 15 material andlabour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt / loose materials from the bricks and from the joints between the bricks. prepared surface should be then washed with diluted hcl acid ( dilution ratio of 1:50 ) for three times in a day for two days. after acid wash surface should be allowed to be air dried for one day. note : further treatment over the surface so achieved will be carried out only after approved of the same by ge. 16 material and labour for carrying out efflorescence treatment to unplastered wall surface comprising of the following specifications and sequence with and including 15 mm thick rendering in cm 1:4 finished even and smooth without using extra cement : ( a ) prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent : ( i ) pidicrete urp of m / s pidilite. ( ii ) sika latex of m / s sika. ( iii ) nitobond sbr latex of m / s fosroc. ( b ) immediately after priming the surface pmm ( polymer modified mortar ) to be applied “by hand” while the prime is tacky. pmm should be prepared by mixing one of the following compounds in cement mortar 1:3 as per manufacturer’s instructions: ( i ) pidicrete urp of m / s pidilite. ( ii ) sika latex of m / s sika. ( iii ) nitobond sbr latex of m / s fosroc. ( c ) pmm surface should be allowed to dry for one day. after that it should painted with two coats of one of the following compound mixed with cement only in ratio of 1 ( selected compound ) : 1:5 ( cement ) : ( i ) pidicrete urp of m / s pidilite. ( ii ) sika latex of m / s sika. ( iii ) nitobond sbr latex of m / s fosroc. ( d ) now apply two coats of one of the following compound over the surface. these compounds are to be used as per manufacturer’s instructions: ( i ) pidifin 2k of m / s pidilite. ( ii ) brush coat of m / s sika. ( iii ) brush bond of m / s fosroc.note : both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours. ( e ) sprinkle loose coarse sand after second coat while surface is tacky.note: ( i ) the item will be executed by authorized applicator only of the selected / approved company. contractor shall submit details of authorised applicator for approval of ge before commencement of work in respect of above item. ( ii ) every stage of work will be approved by ge, then only next layer will be executed by contractor. 17 material andlabour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of birla wall care putty surface complete all as specified and directed. 18 material and labour for preparation of new plastered surfaces of any descriptionnot other wise described over 10 cm width or girth and applying two coats of cement base paint over a coat of alkali resistant primer on wall etc; complete all as specified and directed. 19 material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of oil bound distemper complete all as specified and as directed. 20 material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of cement base paint complete all as specified and as directed. 21 material and labour for preparation of old plastered or unplastered surfaces on ceiling by washing rubbing and applying one coat of white wash on ceiling complete all as specified and as directed. 22 material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel complete all as specified anddirected. 23 material and labour for preparation of old paint steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 24 supply and fixing of gi tubing, isi marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 25 supply and fixing of gi tubing, isi marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 26 supply and fixing of water storage tank of 500 ltr capacity, hdpe triple layer, cylindrical, vertical with closed top and fda approved, 100% ua stabilized, rust proof, isi marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, isi marked, screwed andsuitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. note: tank shall be white and make of tank shall be engraved on the tank. 27 supply and fixing of water storage tank of 1000 ltr capacity, hdpe triple layer, cylindrical, vertical with closed top and fda approved, 100% ua stabilized, rust proof, isi marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, isi marked, screwed andsuitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. note: tank shall be white and make of tank shall be engraved on the tank. 28 supply and fixing in repair of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed. 29 supply and fixing in repair of stop cock, fancy type, chromium plated, long shank and cup ( concealed type ) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified. ( note : weight of stop cock shall not be less than 0.575 kg ) ( note : weight of stop cock shall not be less than 0.575 kg ) 30 supply and fixing in repair ofcp bib tap screwed down high pressure, long body, cast copper alloy, chromium plated`with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. ( note : weight of bib tap shall not be less than 0.575 kg ) 31 supply and fixing in repair of vitreous china squatting pan of orrisa pattern size 580 x 440mm white ( ist quality ) with ‘p’ or ’s’ trap, front or back inlet and foot rests of anypattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed. 32 supply and fixing ( in repair ) vitreous china wash down water closet pedestal pattern ( ewc ) , white including connection to trap and to flushing pipe with ‘p’ or ‘s’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible ldpe pipe jointed with pipe complete all as specified and directed. 33 supply and fixing ( in repair ) vitreous china wash hand basin white flat back of size 550x440mm including ci brackets and 15mm chromium plated pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, pvc connection 450 mm long having ptmt nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including32 mm dia pvc waste pipe etc., complete all as specified and directed. 34 supply and fixing in repair of 10 litre capacity flush polypropylene cistern, isi marked, white at low level complete with pvc bend / flush pipe and making all connection including taking down existing high / low level cistern with all connections and making good the disturbed surfaces in cement mortar ( 1:3 ) to match with the existing surface, complete all as specified and directed. 35 supply and fixing in repair of chromium plated towel rail 600mm longcomplete all as specified and directed 36 supply and fixing in repair offancy type, shower rose 125mm size , brass chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and as directed. 37 supply and fixing in repair of aluminium ( die cast ) body door closer hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. 38 supply and fixing in repair of vitreous china bowl urinal flat back, size of 465x355x265 mm white with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cementmortar 1:4 complete all as specified and as directed. 39 supply and fixing in repair of 32 / 40mm bore pvc waste pipesuitable for urinal / whb / sink etc complete all as specified and as directed. 40 supply and fixing in repair of pvc connections 45cm long and 15mm dia with ptmt nuts and pvc washers on both ends, complete all as specified and as directed. 41 supply and fixing in repair of pvc seat cover with hinges for ewccomplete all as specified and directed. 42 supply and fixing in repair of cp jet spray for with 1.5 mtr long pipefixed in ewc complete all as specified. 43 supply and fixing in repair of 100 / 75mm diacp grating any type fixed in floor and jointed in cm 1:3 complete all as specified and directed. 44 supply and fixing of pvc ( swr ) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or infloors includingdismantling ofpipes of any description any length including bends etc complete all as specified and as directed. 45 supply and fixingg of pvc ( swr ) 75 mm pipe type socket in any length with rubber ring joints fixed to wall or infloors includingdismantling ofpipes of any description any length including bends etc complete all as specified and as directed. 46 supply and fixing of 110 mm bore pvc ( swr ) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. 47 supply and fixing of 75 mm bore pvc ( swr ) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. 48 supply and fixing in repair of 75mm dia of outlet, pvc ( swr ) floor trap plain with cp grating including jointing with solvent cement, complete all as specified and directed. 49 supply and fixing in repairs of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac bldg board or commercial plywood, fixedwith aluminium angled frame and two cp ms hanging arrangements complete all as specified and directed. 50 supply and fixing of 18 / 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in , cup board shelves etc including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed. 51 taking down chowkats or frames with shutter, areanot exceeding 1.50 square metre ( w / o taking off shutters from frames ) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin cm ( 1:3 ) and finishing the surfaces to match with existing finish complete all as specified and directed. 52 taking down chowkats or frames with shutter, areaexceeding 1.50 square metrebut not exceeding 4 square metre ( w / o taking off shutters from frames ) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin cm ( 1:3 ) and finishing the surfaces to match with existing finish complete all as specified and directed. 53 taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site complete all as specified and directed. 54 supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm fi, 25cm long, 6 nos in each chowkhat, necessary lugs, 3 nos 100 mm ms butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, pcc 1:3:6 type c 0filling in frame and for holdfast, 2 nos 12 mm dia ms tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.. 55 supplyand fixing of factory made 35 mm thick, second class hard wood rail and style, plain framed, panelled shutter ( two panel ) with lock rail and panel of 9 mm b.w.p commercial ply or 12 mm veneered particle board with commrcial veneering on both faces ace, size of rails and stiles asper is 1003 ( part i ) kiln seasoned and chemical pressure treated complete all as specified and directed. 56 supply and fixing of iind class ( hollock ) factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass / gauge etc. with sizes of members of shutters as specified in para 8.24 ( a ) of ssr 2009 ( part i ) , complete all as specified and directed. 57 supply and fixing of factory made pvc hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid pvc foam sheet cut at corner and jointed with 02 nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge ( epdm ) rubber gasket weather seal provided through out the frame and fixed to wall with 65 / 100 mm long mild steel screws through the frame by using pvc fasteners ( minimum of 04 nos. of screws to be provided for each vertical number & minimum 02 nos. for horizontal member ) , complete all as specified and directed. 58 supply and fixing of factory made solid pvc door shutter with wood free eps, 28 to 30mm thick ( stiles ) , with 2, 4, or 6 raised panel design with 2mm thick pvc sheet on the front face & 2mm plain colour pvc sheet on back face consisting of frame made out of m.s. tubes for top & bottom rails.m.s. frame shall be covered with heat moulded plain colour pvcc channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 nos stainless steel butt hinges complete all as specified and as directed. 59 supply and fixing in repair of steel window box type using erw hollow p section comprising double frame for and including gauged and glazed skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing no. td 219 ( c ) sheet 1 / 3 to 3 / 3 and td 220 ( c ) sheet 1 / 3 to 3 / 3 as applicable including pcc ( c o , 1:3:6 using 12.5 graded agg ) bed blocks for hold fasts and one shop coat of red oxide primer etc complete all as specified and directed.note: ( i ) for the purpose of measurement & payment double shutter with frame shall be considered as one unit. ( ii ) unit rate quoted against this item shall also include the iron mongery , grills 10mm square bars. ( iii ) only glazing, wire mesh & painting grill shall be measured & paid for separately ) 60 material and labour for preparing new or previously untreated wood or wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. 61 material andlabour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 62 supply and fixing of butt hinges, medium weight, cold rolled, mild steel, isi marked 100 mm sizecomplete all as specified and directed. 63 supply and fixing of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed . 64 supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed. 65 supply & fixing300 mmaluminum anodised sliding door bolts, isi marked, with hasp, staple ( bolt type ) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, all as specified. 66 supply andfixingof mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed. 67 supply andfixing of sheet glass 3mm thick, ordinary quality , in squarenot exceeding 0.5 square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed. 68 supply andfixingof galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. 69 supply andfixingin repair of mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed. 70 supply andfixing in repair of sheet glass 3mm thick, ordinary quality , in squarenot exceeding 0.5 square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed. 71 supply andfixingin repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. 72 supply and fixingin repair of 150mm long floor door stopper of aluminium alloy body & tongue anodized with hard drawn steel spring complete all as specified and as directed.. 73 material and labourforrunning welding ( in repair ) thickness of metal to be welded exceeding 6mm but notexceeding 9mm complete all as specified and directed . 74 material and labour for brick work with sub class ‘b’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar ( 1:6 ) including demolition of brick work built in cement mortar including demolition of old brick / stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. 75 material and labour for brick work ( except bricks ) straight or curved on plan exceeding 6 metre mean radius built in cm 1:6 ( old size brick ) including demolition of old brick / stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. 76 cleaningand removing all scaleand dirt, etcfrom existing water storage tanks of capacityexceeding 500 litres andnot exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank includingcleaning from mouths of circulating pipes, to entire satisfaction of engineer in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. ( the rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) note: ( i ) the whole process ofdisconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, rs. 100 / shall be deducted for each tank per day from the contractor due. ( ii ) a separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. 77 note: amount of credit ofrs. 48, 772.00 for retrieved materials is mentioned in schedule of credit page no 19 of tender documents in pdf form which will be deducted offline while acceptance of tender....

Military Engineer Services - Haryana

31860178 repair to flooring plinth protection plumbing sanitary fittings joinery and misc br items in md accn of yadunath vihar and yogendra enclave of age br i south under ge south ambala cantt material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg / square metre and pointed in white or coloured cement to match the surface over and including15mm thick screed bed or layer in cement mortar ( 1:4 ) including dismantling of existing tiles etc including cement mortar bedding ( but not backing ) andrubbish off the premises complete all as specified and directed. 2 material andlabour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg / square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar ( 1:4 ) including dismantling of existing tiles etc including cement mortar bedding ( but not backing ) andrubbish off the premises complete all as specified and directed. 3 material & labour forpremium quality coloured glazed ceramic tiles ( 300x 450x 7mmthick ) in vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 including dismantling of old floor or wall tiling including cement mortar bedding and removing the rubbish outsidethe defence land complete all as specified and as directed. 4 material & labour for 18 20 mm thickgranite stone slab of any type with table rubbed and polished as in slab / platforms and like set in cement mortar 1:4 including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match the shade of granite slabincluding dismantling of existing stone / tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. 5 material and labour for machine cut kota stone slab 20 25 mm thick ( size of each stone not less than 55cm x 55cm ) , laid in flooring, over and including cement screed bed 20mm thick in cement mortar ( 1:6 ) base set and jointed in neat cement slurry @ 3.00 kg / sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing ( granite finish ) including dismantling of existing stone / tiles etc including cement mortar bedding andrubbish off the premises complete all as specified and directed. 6 material and labour for machine cut kota stone slab 18 20 mm thick ( size of each stone not less than 55cm x 55cm ) , laid on vertical surfaces of skirting / dado, over and including cement screed bed 15 mm thick in cement mortar ( 1:4 ) and set and jointed in neat cement slurry @ 3.00 kg / sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing ( granite finish ) including dismantling of existing stone slab / tiles etc including cement mortar bedding ( but not backing ) andrubbish off the premises complete all as specified and directed. 7 mterial and labour for pcc 1:4:8 type d 2 ( using 40 mm grade stone aggregate ) as in floor filling & mass concrete for sunken floor in wc / bath etc including demolition of cement concrete ( unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 8 material and labour for water proofing treatment of sunken floor of wcs, bathroom, etc by applyingof the following specifications and sequence with and including 40mm thick pcc 1:2:4 type b 1 using 20mm graded aggregate as in floor rough finishescomplete as specified and directed: ( i ) cleaning of sunken floor surface with mechanical means i.e. wire brush / air blower etc. andremove all loose / unsound material, dirt, dust etc. ( ii ) applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. ( iii ) first layer of cement slurry @ 0.488kg / sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 kg / sqm and allow it to air dry for 04 hours. ( iv ) second layer of cement slurry @ 0.242 kg / sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126kg / sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. ( v ) 200 micron thick polythene film shall be pasted with help of adhesives over treatment.note joints of wc / trap / soil waste shall be properly sealed with sealing compound. testing of all traps and joint and sunken slab shall be done as per is 1742 before filling and tiling work. 9 matrerial and labour for 40mm thick average thicknesspcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate as in levelling course / paddingover roof surface, surface to be finished even and smooth with using extra cementincluding demolition of cement concrete ( unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 10 material and labour for 100mm thickpcc1:3:6 type c 2 using 40mm graded aggregate as sub base of floor including demolition of cement concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level ) or complete all as specified and directed. 11 material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m 35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified & as directed. 12 material and labour for plain cement concrete 1:2:4 type b 1 ( using 20 mm graded mechanically crushed stone aggregate ) asroof kerbs or mud stops and the like, rounded or chamfered on edges complete including demolition of cement concrete ( unreinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 13 taking down cement plaster of any description and in any position including raking outfor keys, scrubbing down with water etc of any thikness & brick or stone wall etc. cement or cement lime plaster any description complete all as specified and directed. 14 material and labour for rendering 15 mm thick on fair face of brick work , concrete surfaces in cement mortar 1:6 finished even and smooth w / o extra cement complete all as specified and directed. 15 material and labour for rendering 15 mm thick on fair face of brick work , concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. 16 material and labour for 10mm thick cement plaster in cm ( 1:3 ) to ceiling surfaceand finished the surface even and smooth without using extra cement with and including applyingthree coats of whitewash on ceiling complete all specified and directed. 17 material andlabour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt / loose materials from the bricks and from the joints between the bricks. prepared surface should be then washed with diluted hcl acid ( dilution ratio of 1:50 ) for three times in a day for two days. after acid wash surface should be allowed to be air dried for one day. note : further treatment over the surface so achieved will be carried out only after approved of the same by ge. 18 material and labour for carrying out efflorescence treatment to unplastered wall surface comprising of the following specifications and sequence with and including 15 mm thick rendering in cm 1:4 finished even and smooth without using extra cement : ( a ) prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent : ( i ) pidicrete urp of m / s pidilite. ( ii ) sika latex of m / s sika. ( iii ) nitobond sbr latex of m / s fosroc. ( b ) immediately after priming the surface pmm ( polymer modified mortar ) to be applied “by hand” while the prime is tacky. pmm should be prepared by mixing one of the following compounds in cement mortar 1:3 as per manufacturer’s instructions: ( i ) pidicrete urp of m / s pidilite. ( ii ) sika latex of m / s sika. ( iii ) nitobond sbr latex of m / s fosroc. ( c ) pmm surface should be allowed to dry for one day. after that it should painted with two coats of one of the following compound mixed with cement only in ratio of 1 ( selected compound ) : 1:5 ( cement ) : ( i ) pidicrete urp of m / s pidilite. ( ii ) sika latex of m / s sika. ( iii ) nitobond sbr latex of m / s fosroc. ( d ) now apply two coats of one of the following compound over the surface. these compounds are to be used as per manufacturer’s instructions: ( i ) pidifin 2k of m / s pidilite. ( ii ) brush coat of m / s sika. ( iii ) brush bond of m / s fosroc.note : both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours. ( e ) sprinkle loose coarse sand after second coat while surface is tacky.note: ( i ) the item will be executed by authorized applicator only of the selected / approved company. contractor shall submit details of authorised applicator for approval of ge before commencement of work in respect of above item. ( ii ) every stage of work will be approved by ge, then only next layer will be executed by contractor. 19 material andlabour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of birla wall care putty surface complete all as specified and directed. 20 material and labour for preparation of new plastered surfaces of any descriptionnot other wise described over 10 cm width or girth and applying two coats of cement base paint over a coat of alkali resistant primer on wall etc; complete all as specified and directed. 21 material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of oil bound distemper complete all as specified and as directed. 22 material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of cement base paint complete all as specified and as directed. 23 material and labour for preparation of old plastered or unplastered surfaces on ceiling by washing rubbing and applying one coat of white wash on ceiling complete all as specified and as directed. 24 material and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel complete all as specified anddirected. 25 material and labour for preparation of old paint steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 26 supply and fixing of gi tubing, isi marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 27 supply and fixing of gi tubing, isi marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting / chasing / pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 28 supply and fixing of water storage tank of 500 ltr capacity, hdpe triple layer, cylindrical, vertical with closed top and fda approved, 100% ua stabilized, rust proof, isi marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, isi marked, screwed andsuitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. note: tank shall be white and make of tank shall be engraved on the tank. 29 supply and fixing of water storage tank of 1000 ltr capacity, hdpe triple layer, cylindrical, vertical with closed top and fda approved, 100% ua stabilized, rust proof, isi marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, isi marked, screwed andsuitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. note: tank shall be white and make of tank shall be engraved on the tank. 30 supply and fixing in repair of 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed. 31 supply and fixing in repair of stop cock, fancy type, chromium plated, long shank and cup ( concealed type ) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified. ( note : weight of stop cock shall not be less than 0.575 kg ) ( note : weight of stop cock shall not be less than 0.575 kg ) 32 supply and fixing in repair ofcp bib tap screwed down high pressure, long body, cast copper alloy, chromium plated`with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. ( note : weight of bib tap shall not be less than 0.575 kg ) 33 supply and fixing in repair of vitreous china squatting pan of orrisa pattern size 580 x 440mm white ( ist quality ) with ‘p’ or ’s’ trap, front or back inlet and foot rests of anypattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed. 34 supply and fixing ( in repair ) vitreous china wash down water closet pedestal pattern ( ewc ) , white including connection to trap and to flushing pipe with ‘p’ or ‘s’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible ldpe pipe jointed with pipe complete all as specified and directed. 35 supply and fixing ( in repair ) vitreous china wash hand basin white flat back of size 550x440mm including ci brackets and 15mm chromium plated pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, pvc connection 450 mm long having ptmt nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including32 mm dia pvc waste pipe etc., complete all as specified and directed. 36 supply and fixing in repair of 10 litre capacity flush polypropylene cistern, isi marked, white at low level complete with pvc bend / flush pipe and making all connection including taking down existing high / low level cistern with all connections and making good the disturbed surfaces in cement mortar ( 1:3 ) to match with the existing surface, complete all as specified and directed. 37 supply and fixing in repair of fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as directed. 38 supply and fixing in repair of chromium plated towel rail 600mm longcomplete all as specified and directed 39 supply and fixing in repair offancy type, shower rose 125mm size , brass chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and as directed. 40 supply and fixing in repair of 32 / 40mm bore pvc waste pipesuitable for urinal / whb / sink etc complete all as specified and as directed. 41 supply and fixing in repair of pvc connections 45cm long and 15mm dia with ptmt nuts and pvc washers on both ends, complete all as specified and as directed. 42 supply and fixing in repair of pvc seat cover with hinges for ewccomplete all as specified and directed. 43 supply and fixing in repair of cp jet spray for with 1.5 mtr long pipefixed in ewc complete all as specified. 44 supply and fixing in repair of 100 / 75mm diacp grating any type fixed in floor and jointed in cm 1:3 complete all as specified and directed. 45 supply and fixing of pvc ( swr ) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or infloors includingdismantling ofpipes of any description any length including bends etc complete all as specified and as directed. 46 supply and fixingg of pvc ( swr ) 75 mm pipe type socket in any length with rubber ring joints fixed to wall or infloors includingdismantling ofpipes of any description any length including bends etc complete all as specified and as directed. 47 supply and fixing of 110 mm bore pvc ( swr ) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. 48 supply and fixing of 75 mm bore pvc ( swr ) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. 49 supply and fixing in repair of 75mm dia of outlet, pvc ( swr ) floor trap plain with cp grating including jointing with solvent cement, complete all as specified and directed. 50 supply and fixing in repairs of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac bldg board or commercial plywood, fixedwith aluminium angled frame and two cp ms hanging arrangements complete all as specified and directed. 51 supply and fixing of 18 / 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in , cup board shelves etc including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed. 52 taking down chowkats or frames with shutter, areanot exceeding 1.50 square metre ( w / o taking off shutters from frames ) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin cm ( 1:3 ) and finishing the surfaces to match with existing finish complete all as specified and directed. 53 taking down chowkats or frames with shutter, areaexceeding 1.50 square metrebut not exceeding 4 square metre ( w / o taking off shutters from frames ) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin cm ( 1:3 ) and finishing the surfaces to match with existing finish complete all as specified and directed. 54 taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site complete all as specified and directed. 55 supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm fi, 25cm long, 6 nos in each chowkhat, necessary lugs, 3 nos 100 mm ms butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, pcc 1:3:6 type c 0filling in frame and for holdfast, 2 nos 12 mm dia ms tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.. 56 supplyand fixing of factory made 35 mm thick, second class hard wood rail and style, plain framed, panelled shutter ( two panel ) with lock rail and panel of 9 mm b.w.p commercial ply or 12 mm veneered particle board with commrcial veneering on both faces ace, size of rails and stiles asper is 1003 ( part i ) kiln seasoned and chemical pressure treated complete all as specified and directed. 57 supply and fixing of iind class ( hollock ) factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass / gauge etc. with sizes of members of shutters as specified in para 8.24 ( a ) of ssr 2009 ( part i ) , complete all as specified and directed. 58 supply and fixing of factory made pvc hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid pvc foam sheet cut at corner and jointed with 02 nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge ( epdm ) rubber gasket weather seal provided through out the frame and fixed to wall with 65 / 100 mm long mild steel screws through the frame by using pvc fasteners ( minimum of 04 nos. of screws to be provided for each vertical number & minimum 02 nos. for horizontal member ) , complete all as specified and directed. 59 supply and fixing of factory made solid pvc door shutter with wood free eps, 28 to 30mm thick ( stiles ) , with 2, 4, or 6 raised panel design with 2mm thick pvc sheet on the front face & 2mm plain colour pvc sheet on back face consisting of frame made out of m.s. tubes for top & bottom rails.m.s. frame shall be covered with heat moulded plain colour pvcc channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 nos stainless steel butt hinges complete all as specified and as directed. 60 supply and fixing in repair of steel window box type using erw hollow p section comprising double frame for and including gauged and glazed skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing no. td 219 ( c ) sheet 1 / 3 to 3 / 3 and td 220 ( c ) sheet 1 / 3 to 3 / 3 as applicable including pcc ( c o , 1:3:6 using 12.5 graded agg ) bed blocks for hold fasts and one shop coat of red oxide primer etc complete all as specified and directed.note: ( i ) for the purpose of measurement & payment double shutter with frame shall be considered as one unit. ( ii ) unit rate quoted against this item shall also include the iron mongery , grills 10mm square bars. ( iii ) only glazing, wire mesh & painting grill shall be measured & paid for separately ) 61 material and labour for preparing new or previously untreated wood or wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. 62 material andlabour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 63 supply and fixing of butt hinges, medium weight, cold rolled, mild steel, isi marked 100 mm sizecomplete all as specified and directed. 64 supply and fixing of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed . 65 supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed. 66 supply & fixing300 mmaluminum anodised sliding door bolts, isi marked, with hasp, staple ( bolt type ) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, all as specified. 67 supply andfixingof mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed. 68 supply andfixing of sheet glass 3mm thick, ordinary quality , in squarenot exceeding 0.5 square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed. 69 supply andfixingof galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. 70 supply andfixingin repair of mild steel helical door spring 150 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and directed. 71 supply andfixing in repair of sheet glass 3mm thick, ordinary quality , in squarenot exceeding 0.5 square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and as directed. 72 supply andfixingin repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. 73 supply and fixingin repair of 150mm long floor door stopper of aluminium alloy body & tongue anodized with hard drawn steel spring complete all as specified and as directed.. 74 material and labourforrunning welding ( in repair ) thickness of metal to be welded exceeding 6mm but notexceeding 9mm complete all as specified and directed . 75 material and labour for brick work with sub class ‘b’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar ( 1:6 ) including demolition of brick work built in cement mortar including demolition of old brick / stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. 76 material and labour for brick work ( except bricks ) straight or curved on plan exceeding 6 metre mean radius built in cm 1:6 ( old size brick ) including demolition of old brick / stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. 77 cleaningand removing all scaleand dirt, etcfrom existing water storage tanks of capacityexceeding 500 litres andnot exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank includingcleaning from mouths of circulating pipes, to entire satisfaction of engineer in–charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. ( the rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) note: ( i ) the whole process ofdisconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, rs. 100 / shall be deducted for each tank per day from the contractor due. ( ii ) a separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. 78 material andlabour for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with l hook or cranked bolts in patches including dismantling old asbestos cement corrugated or semi corrugated sheets, complete all as specified and directed. 79 note: amount of credit ofrs. 95, 184.00 for retrieved materials is mentioned in schedule of credit page no 19 of tender documents in pdf form which will be deducted offline while acceptance of tender....

Panchayat Raj Department - Haryana

31769269 tender for supply of stone metal, bajri 20mm & 12mm, fine sand, coarse sand, jamna sand, stone dunt, 151 lnterlockng paver block m 35 grade in size 40mm thick, 60mm thick & m 40 grade in size 80mm thick and pre casted rubberized coaled colour added tiles of 40mm and 60mm thick, 300mm x 300mm chaqured (dfferent pattern) coloured floor tiles, pressed steel chowkhat, paneled shutters shisham) hardwood, marandi, flush doors, pvc shutters (flush & pannel), flooriwall tiles (glazed, ceramic, vitnfied), floor tiles double charge different sizes, kota stone in different sizes, rcc hume pipe in different, la, rmc (m 20, m 30) isi tor steel (fe 500) ms girders/joist, fabrcated gates! grill/jall doors/rolling shutters, bathroom fittings and sanitary items, false ceiling of different type, paint asian! nerolac/ berger etc and white wash, p. o. f fly ash....

Public Health Engineering Department - Haryana

31636443 kot estimate for improvement of water supply scheme by laying of distribution pipe line and repair of sbs in village kot block hathin district palwal under jjm laying, jointing, testing and commissioning of distribution pipe line, and repairing, white wash of boosting station in village kot distt. palwal and all other works contingent thereto...

Public Health Engineering Department - Haryana

31636408 gurakshar dnit for improvement of water supply scheme by laying of distribution pipe line and repair of sbs in village gurakshar block hathin district palwal under jjm laying, jointing, testing and commissioning of distribution pipe line, and repairing, white wash of boosting station in village gurakshar distt. palwal and all other works contingent thereto...

Public Health Engineering Department - Haryana

31636407 dhiranki dnit for improvement of water supply scheme by laying of distribution pipe line and repair of sbs in village dhiranki block hathin district palwal under jjm laying, jointing, testing and commissioning of distribution pipe line, and repairing, white wash of boosting station in village dhiranki distt. palwal and all other works contingent thereto...

Haryana Urban Development Authority - Haryana

31567322 annual maintenance a / mtc. of hsvp main water works, sector 1, rohtak repair of staff quarter no.ww 1 with white wash, distempering, painting, providing fixing of chowkat, flush door and wire guage door etc. and all other works contingent thereto...

Public Health Engineering Department - Haryana

31457825 pachanka dnit for improvement of water supply scheme by laying of distribution pipe line and repair of sbs in village pachanka block hathin district palwal under jjm laying, jointing, testing and commissioning of distribution pipe line, providing of fixing pumping machinery and repairing, white wash of boosting station in village pachanka distt. palwal and all other works contingent thereto...

Panchayat Raj Department - Haryana

31388550 inviting the quotations for fixing the rates of building materials paint inviting the quotations for fixing the rates of building materials paint , e1) supply of paint from reputed manufacturer isi marked such as asian, nerolack, tractor etc. , e2) supply of primer from reputed manufacturer isi marked such as asian, nerolack, tractor etc. , e3) supply of snowcem (cement based paint 1st class) , e4) supply of oil bound distemper isi marked , e5) supply of dry distemper isi marked , e6) supply of neel , e7) supply of lime for white wash , e8) supply of ddl/ fevicol , e9) supply of brushes for white wash/paint size 3 , e10) supply of brushes for white wash/paint size 4 , e11) supply of brushes for white wash/paint size 5 , e12) supply of brushes for white wash/paint size 6 , e13) supply of lime colour , e14) supply of apex weather coat , e15) supply of regmar. , e16) supply of iron patti , e17) supply of dhoti/cloth. , e18) supply of wall putti , e19) supply of chaak mitti , e20) supply of touch wood , e21) supply of plaster of paris (pop) , e22) supply of glass strips 3 mm x 30 mm. (100 rft) , e23) supply of glass strips 4 mm x 40 mm. (100 rft) , e24) supply of tarpentine oil , e25) supply of indian type orissa or orya w.c. seatwith foot rest complete with 100mm ‘p’ trap isi marked. (a) size 580mm in white chinaware perryware, hindware, cera , e26) supply of indian type orissa or orya w.c. seatwith foot rest complete with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. (a) size 580mm in white. , e27) supply of indian type orissa or orya w.c. seatwith foot rest complete with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. (a) size 580mm in single colour , e28) supply of indian type orissa or orya w.c. seatwith foot rest complete with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. (a) size 630mm in white , e29) supply of indian type orissa or orya w.c. seatwith foot rest complete with 100mm ‘p’ trap isi marked chinaware perryware, hindware, cera. (a) size 630mm in single colour. , e30) supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . (a) white colour (hsr no. 30.4 (i)) , e31) supply of european type wc seat with non concealed ‘p’ or ‘s’ trapisi marked chinaware perryware, hindware, cera . (a) single colour. (hsr no. 30.4 (ii)) , e32) supply of seat cover for european type wc, isi marked (comander, cera, duralite) , e33) pvc cistern 7.5 liter (two lever cistern) isi marked (perryware, hindware, cera) , e34) wash basin (lavatory suites). (a) 550mmx 400mm white colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.41 (iv)) , e35) wash basin (lavatory suites). (a) 630mmx 450mm white colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.41 (vi)) , e36) flat back or angular lipped front urinal basin 465mm highwhite colour isi marked chinaware perryware, hindware, cera . (hsr no. 30.19 (i)) , e37) stainless steel kitchen sink without drainage board of overall size 24” x 18” x 8” with 40mm ss waste & flexible waste pipe with isi marka (nirali, jayana, chillys) , e38) supply of swr p trap 75mm x 75 mm with isi marka (prince, finolex, supreme )s , e39) supply of swr p trap 110mm x 110 mm with isi marka (prince, finolex, supreme ) , e40) supply of swr nahani trap without jail110mm x 75 mm with isi marka (prince, finolex, supreme ) , e41) supply of swr nahani trap without jail110mm x 90 mm with isi marka (prince, finolex, supreme ) , e42) supply of fiber sheet 2mm thick super quality , e43) supply of fiber sheet 3mm thick super quality , e44) supply of asbestos sheet 6mm thick of isi mark , e45) supply of galvanized iron sheet 24 guage , e46) supply of galvanized iron sheet 22 guage , e47) supply of galvalume sheet 0.5 mm thickness with powder coated. , e48) supply of interior paint from reputed manufacturer isi marked such as asian, nerolack, burger,tractor etc. , e49) supply of exterior paint from reputed manufacturer isi marked such as asian (apex), nerolack, burger,tractor etc. , e50) supply of white paint from reputed manufacturer isi marked such as asian, nerolack, burger,tractor etc. , e51) supply of water base primerfrom reputed manufacturer isi marked such as asian, nerolack, tractor, burger etc. , e52) supply ofstainer red oxide isi marked (200 ml) , e53) supply of stainer red oxide isi marked (100 ml) , e54) supply ofstainer red oxide isi marked (50 ml) , e55) thinner , e56) p.v.c. pipe 6kg pressure 75mm with isi marka (prince, finolex, supreme etc. ) , e57) p.v.c. pipe 6kg pressure 90mm with isi marka (prince, finolex, supreme etc. ) , e58) p.v.c. pipe 6kg pressure 110mm with isi marka (prince, finolex, supreme etc. ) , e59) p.v.c. bend 75mm with isi marka (prince, finolex, supreme etc. ) , e60) p.v.c. bend 90mm with isi marka (prince, finolex, supreme ) , e61) p.v.c. bend 110mm with isi marka (prince, finolex, supreme etc. ) , e62) u.p.v.c. pipe 6kg pressure 75mm with isi marka (prince, finolex, supreme etc. ) , e63) u.p.v.c. pipe 6kg pressure 90mm with isi marka (prince, finolex, supremeetc. ) , e64) u.p.v.c. pipe 6kg pressure 110mm with isi marka (prince, finolex, supreme etc. ) , e65) u.p.v.c. pipe 6kg pressure 160mm with isi marka (prince, finolex, supremeetc. ) , e66) u.p.v.c. pipe 6kg pressure 200mm with isi marka (prince, finolex, supremeetc. ) , e67) u.p.v.c. coupler heavy 75mm with isi marka (prince, finolex, supreme etc. ) , e68) u.p.v.c. coupler heavy 90mm with isi marka (prince, finolex, supreme etc. ) , e69) u.p.v.c. coupler heavy 110mm with isi marka (prince, finolex, supreme ) , e70) u.p.v.c. elbow heavy 75mm with isi marka (prince, finolex, supreme etc. ) , e71) u.p.v.c. elbow heavy 90mm with isi marka (prince, finolex, supreme etc. ) , e72) u.p.v.c. elbow heavy 110mm with isi marka (prince, finolex, supreme etc. ) , e73) u.p.v.c. tee heavy 75mm with isi marka (prince, finolex, supreme etc. ) , e74) u.p.v.c. tee heavy 90mm with isi marka (prince, finolex, supreme etc. ) , e75) u.p.v.c. tee heavy 110mm with isi marka (prince, finolex, supreme etc. ) , e76) g.i. pipe ‘b’ class isi marked (jindal hissar, ravindra, tata) (i) 15mm i/d. , e77) g.i. pipe ‘b’ class isi marked (jindal hissar, ravindra, tata) (ii) 20mm i/d. , e78) g.i. socket isi marked (i) 15mm i/d , e79) g.i. socket isi marked. (ii) 20mm i/d , e80) g.i. elbow isi marked. (i) 15mm i/d , e81) g.i. elbow isi marked. (ii) 20mm i/d , e82) g.i. tee isi marked. (i) 15mm i/d , e83) g.i. tee isi marked. (ii) 20mm i/d , e84) g.i. reducerisi marked. (i) 15mm i/d , e85) g.i. reducerisi marked (ii) 20mm i/d , e86) g.i. union couplingisi marked (i) 15mm i/d , e87) g.i. union couplingisi marked (ii) 20mm i/d , e88) supply gun metal peet valves (heavy pattern) isi marked (i) 15mm i/d , e89) supply gun metal peet valves (heavy pattern) isi marked (ii) 20mm i/d , e90) supply automatic ball valves 20mm i/dfor tank with plastic ball , e91) supply m.s. flat iron clamps (i) for 75mm pipe , e92) supply m.s. flat iron clamps. (i) for 90mm pipe , e93) supply m.s. flat iron clamps. (i) for 110mm pipe , e94) p.v.c. connection 15mm i/d x 450mm , e95) p.v.c. connection 15mm i/d x 600mm , e96) u.p.v.c. pipe 3meter single socket (swr) 75mm with isi marka (prince, finolex, supreme ) , e97) u.p.v.c. pipe 3meter single socket (swr) 90mm with isi marka (prince, finolex,supreme ) , e98) u.p.v.c. pipe 3meter single socket (swr) 110mm with isi marka (prince, finolex, supreme ) , e99) u.p.v.c. (swr) bend 75mm with isi marka (prince, finolex, supreme ) , e100) u.p.v.c. (swr) bend 90mm with isi marka (prince, finolex, supreme ) , e101) u.p.v.c. (swr) bend 110mm with isi marka (prince, finolex, supreme ) , e102) u.p.v.c. (swr) coupler 75mm with isi marka (prince, finolex, supreme ) , e103) u.p.v.c. (swr) coupler 90mm with isi marka (prince, finolex, supreme ) , e104) u.p.v.c. (swr) coupler 110mm with isi marka (prince, finolex, supreme ) , e105) u.p.v.c. (swr) single t with door 75mm with isi marka (prince, finolex, supreme ) , e106) u.p.v.c. (swr) single t with door 90mm with isi marka (prince, finolex, supreme ) , e107) u.p.v.c. (swr) single t with door 110mm with isi marka (prince, finolex, supreme ) , e108) u.p.v.c. (swr) vent cowl 75mm with isi marka (prince, finolex, supreme ) , e109) u.p.v.c. (swr) vent cowl 90mm with isi marka (prince, finolex, supreme ) , e110) u.p.v.c. (swr) vent cowl 110mm with isi marka (prince, finolex, supreme ) , e111) hdpe water storage tank with covers/lids marked with is: 12701 (sintex, diplast, o.k., supreme (hsr no. 30.119) (i) 500litre capacity , e112) hdpe water storage tank with covers/lids marked with is: 12701 (sintex, diplast, o.k., supreme (hsr no. 30.119) (ii) 1000litre capacity , e113) main hole steps , e114) gi barbed wire with 93.4 gram wight per meter length , e115) concertina wire , e116) concertina coil , g8) bitumen (85/25) , g9) bitumen (20/30) , g10) polythine sheat , g11) dr. fix it (lw+) , g12) dr. fix it (urp) , g13) grout , g14) floor tilesadhessive , g15) white cement (jk,birla) , h1) submersible pump 1.5 hp with panel, isi mark , h2) submersible pump 1 hp with panel isi mark , h3) pvc pipe 4” aggarwal mark 10 kg d.t , h4) pvc pipe 4.5” aggarwal mark 15 kg d.t , h5) wire 1.5 mm , h6) h.d p.e pipe 1” (sundka) , h7) h.d p.e pipe 1.25” (sundka) , h8) pvc socket 4” , h9) pvc socket 4.5” , h10) g.i pipe 3” (medium) , h11) g.i pipe 1.25” (medium) , h12) reducer pvc 5” x 4” , h13) hand pump machine indian mark ii , h14) cylinder double bocky (iron) , h15) cylinder single bocky (iron) , h16) cylinder single bocky (brass) , h17) g.i. socket 1.25” isi marked , h18) g.i. socket 3” isi marked , h19) filter jalli , h20) small accessories for submersible (nipple, bush, elbow, sikanja etc.) , h21) small accessories for hand pump (bocky, dolchi, handle etc.) , h22) iron rod with socket , h23) solvent , h24) bore labour , h25) development charges (with compressor) , h26) development charges (with motor) , h27) panel board 1.5 hp , l1) rigid pvc pipe (medium quality)isi marked ( diplast, polycab, polypak). (i) 15mm dia , l2) rigid pvc pipe (medium quality)isi marked ( diplast, polycab, polypak) (i) 20mm dia , l3) rigid pvcbend(medium quality)isi marked ( diplast, polycab, polypak) (i) 15mm dia , l4) rigid pvc bend(medium quality)isi marked ( diplast, polycab, polypak) (i) 20mm dia , l5) fan box , l6) concealed 3” , l7) concealed4” , l8) concealed 5”...